Experience

• 

  Techint cimi montubi

  Jan 1993 - Jan 2000

  Construction material manage & senior field materials engineer

  TECHINT CIMIMONTUBI BELGIUM, as responsible of Construction Material management in various Sites.Lead on behalf of the Clients inventory team developing procedure for managing the Project Materials, asking over full control of the material receiving, storage & supply to offshore facility. Developing interviewing & Managing team of Document controllers, field material receiving/issuing team, point of contact for all QA/QC issues Identifying & addressing engineering anomalies. Complete review of all material certification including HP valves, piping and electrical equipment for compliance with the PED & project procedures, correcting past discrepancies. Reintroducing quarantined equipments, into stock, with an inventory report. Controlling and managing Over Short & Damage register. Managing the upload of all daily produced & historic documentation into INTERNAL SAP SOFTWARE, allowing accurate storage and ease of retrieval. Ensuring that delivered materials and equipment are correctly identified and segregated, establishing links with procurement and supplier base to expedite material certification and Custom Clearance Documents, Controlling the redistribution to the onshore facility ensuring that the correct documentation accompanies the selected materials and equipmentsIn this position in the following projects: - AMOCO - PTA3 Plant, Geel, Belgium, 1993 - 1998 Client: Technipetrol of Roma, (Italy). - BP/AMOCO, PX Plant, Geel, Belgium, 1999 Client: Foster Wheeler LTD - Reading (England). - BP/AMOCO, PTA3 Upgrading, Geel, Belgium, 1999 Client: Technip Italy - BRC - CVV Upgrading, Antwerp, Belgium, 1999 / 2000 Client: Technip France Show less

• 

  Enel power

  Jan 2004 - Dec 2004

  Resident senior qa/qc, engineer

  Producing Quality Plans, ITP, work procedures & Weld Procedures Optimization and Revamping of all existing Thermo Electric POWER STATION in Italy for the following components:Piping, Pumps, Heaters Heat Exchanges & Drums. Control of all aspects of QA & QC, in fabrication.Ensure all test equipment is calibrated, welder qualifications up-dated & maintained. Responsible for all aspects of QC/QA, interpretation of drawings, shop floor surveillance, to ensure implementation of quality plans & procedures, execute internal audits. Requesting, assessing & monitoring of, N.D.E., control of heat treatment and P.M.I. subcontractors, inspection of paint & insulation contractors work, producing and maintaining, verification and release of Final Data BooksOWNER: ENDESA , Italy Show less

• 

  Techint technologies ( italimpianti)

  Jan 2006 - Jan 2006

  Quality control supervisor

  Quality Control inspector and expediter freelance c/o the Quality Control department of TECHINT Technologies ( Italimpianti) involved in the optimization of brench in Mumbai ( India) for costruction of WALKING HEARTH FURNACE for client like QASCO ( Quatar), BUSHAN ( India) and JINDAL ( INDIA) with the following duties:-Issued Documents for Client approval and verification and approval of QC documents of all the Suppliers-Inspection and Expediting coordination and traning of Indian Inspectors for supply and costruction of Machines, Pipings, Cimeny, Pumps, Heaters and Steel Structure -Withness at Assembly inspection with client present-Expediting and Inspection reports verification-Issue Status progress of projects-Expediting planning issuance and updating Show less

• 

  Alstom power

  Jan 2006 - Dec 2006

  Resident senior qa/qc, engineer

  Producing Quality Plans, ITP, work procedures & Weld Procedures Optimization and Revamping of POWER STATION in Cadiz (Spain) for the following components:Piping, Pumps, Heaters Heat Exchanges & Drums. Control of all aspects of QA & QC, in fabrication.Ensure all test equipment is calibrated, welder qualifications up-dated & maintained. Responsible for all aspects of QC/QA, interpretation of drawings, shop floor surveillance, to ensure implementation of quality plans & procedures, execute internal audits. Requesting, assessing & monitoring of, N.D.E., control of heat treatment and P.M.I. subcontractors, inspection of paint & insulation contractors work, producing and maintaining, verification and release of Final Data BooksOwners : ENDESA, Spain Show less

• 

  Danieli & c. officine meccaniche s.p.a.

  Jan 2006 - Jan 2006

  Quality control inspector and expediter freelance

  Quality Control inspector and expediter freelance c/o the Quality Control department of DANIELI Centro Tube involved in the optimization of brench in Quality Department for supply of various Seamless Pipe Plants for various clients with the following duties:- Issued Documents for Client approval and verification and approval of QC documents of all the Suppliers- Inspection and Expediting coronation and traning of Inspectors for supply and construction of Machines, Piping, Chimney, Pumps, Heaters and Steel Structure - Witness at Assembly inspection with client present- Expediting and Inspection reports verification- Issue Status progress of projects- Expediting planning issuance and updating Show less

• 

  Sicon oil & gas s.p.a.

  Jan 2007 - Jan 2007

  Expediter and support on quality dept.

  Expediter freelance c/o the Expediting department of SICON OIL &GAS C/C CCC involved in the optimization of brench in Milan for costruction of Crude Onshore Production Facilities for CLIENT as : Kuwait Gulf Oil Company (KGCO) and Dolphin Energy Ltd.Producing Quality Plans, ITP, work procedures & Weld Procedures.. Optimization of construction of crude Onshore Plant and EGDS Project for the following components:Piping, Pumps, Heaters, Steel structure, Chimney. Control of all aspects of QA & QC, during installation.Ensure all test equipment is calibrated, welder qualifications up-dated & maintained. Responsible for all aspects of QC/QA, interpretation of drawings, shop floor surveillance, to ensure implementation of quality plans & procedures, execute internal audits. Requesting, assessing & monitoring of, N.D.E., control of heat treatment and P.M.I. subcontractors, inspection of paint & insulation contractors work, producing and maintaining, verification and release of Final Data Books Show less

• 

  Desmet ballestra

  Jan 2007 - Jan 2008

  Quality control supervisor

  Quality Control inspector and expediter with permanent contract c/o the Quality Control department of DESMET BALLESTRA OLEO (Pomezia) involved in the Optimization of BIO Diesel Plan and Bio Refinery with the following duties:Producing Quality Plans, ITP, work procedures & Weld Procedures. Assist in transition to ISO 9001(2000) & registration to PED. Optimization of BIO DIESEL Plant and BIO REFINERY Plant for the following components:Piping, Pumps, Heaters, Steel structure, Chimney. Control of all aspects of QA & QC, during installation.Ensure all test equipment is calibrated, welder qualifications up-dated & maintained. Responsible for all aspects of QC/QA, interpretation of drawings, shop floor surveillance, to ensure implementation of quality plans & procedures, execute internal audits. Requesting, assessing & monitoring of, N.D.E., control of heat treatment and P.M.I. subcontractors, inspection of paint & insulation contractors work, producing and maintaining, verification and release of Final Data Books. Show less

• 

  Amal - construções metálicas s.a.

  Jan 2008 - Jan 2009

  Quality control inspector and expediter freelance

  Quality Control inspector and expediter freelance c/o the Quality Control department of AMAL-SA Portugall involved in the Optimization of Refinery in PORTO (Portugall) and Sea Lines in CABINDA (Angola), GALP; ANA-Aereoportos de Portugal s.a.; SONANGOL Angolawith the following duties:Various Owners :Various onshore/offshore Piping & Instrumenttion materials inspection and release.QC departments reviewing and commenting on QP and quality documents, produce on behalf of sub-contractor, ITP’s and procedures, Agree each contractor audits schedules, coordinate attendance of relevant QC to their internal audits. Conduct EPC audits on each contractor ensuring material traceability is recorded and maintained and the project is conducted in line with project and contractor procedures and QP. Manage the review by inspection team of contractor ITP’s QP WPS/PQR. PMI & NDT procedures for each discipline. Control and manage through workshops the contractors team of inspectors of various disciplines for mechanical completion. Manage inspection of vendor equipment and fabrications at vendor premises, heat exchangers pumps etc, to ensure completeness and review documentation, prior to delivery and at point of delivery. Show less

• 

  Inspection agency

  Feb 2009 - Feb 2012

  Quality control inspector and expediter freelance

  Quality Control inspector and expediter freelance c/o MOODY HELLAS S.A.; STERLING QUALITY SERVICE, TUV HELLAS S.A.; ENI CONGO and AMAL S.A. With head quarter in Portugal and Angola, LAUREL S.A. Inspections : Mechanical Test, NDT and V&D Check, Performance Test, Leak Test, Electrical Involved in workshop Inspection on following projects:Moody Hellas S.A. & TUV HELLAS S.A.-ELEFSIS REFINERY UPGRADES PROJECTClient: ELLENIC PETROLIUM S.A. -ELEFSIS REFINERY UPGRADES PROJECTClient: HELLENIC PETROLEUM S.A.-DESFA Hellenic Gas Transmission System Operator S.A. TERNA S.A. & ENIMEX a)Project: THE DETAILED ENGINEERING, PROCUREMENT INSTALLATION AND PUTTING IN OPERATION OF THE NEW M-STATION HERON B’, (U-6030) AND MODIFICATION OF THE EXISTING M-STATION HERON A’ (U-6020)” FOR THE NATURAL GAS TRANSMISSION SYSTEMc)Project: NEA MESSIMVRIA COMPRESSOR STATION Client: ENIMEX S.A.LAUREL- Manuel Alves da Silva-S.A. – Cosrtucoes Metalicasa)Project: N/ OB11001 - SGG JC5 Brasil - Chapas para o Bath Casing AMAL Construcoes Metalicas SA –Portugala)Project: PETROGAL PORTO PROJECT Client: PETROGASc)Project : FACMIL PFA SHOP in Setubal-Portugal Client : ARTEMIS*d)Project: ALS TRANSFER OF GOC ( TANKS FACILITIES AND SUPPORT) AEREOPORTO DE LISBON Client : ANA- AEREOPORTOS DE PORTUGAL S.A.AMAL Constucoes Metalicas SA- ANGOLAa)Project: CABINDA STORAGE DEPOT IMPLEMENTATION: Client: SONANGOL Angolab)Project: MULENVOS TANK FARM PIPE LINE Client: SONANGOL AngolaIBO Srl - ENI CONGO PRJ. Point Noir, Republic of CongoClient: AXON-CONGO S.A. – ENI CONGO Show less

• 

  Fbm hudson italiana spa

  Jul 2012 - Sept 2013

  Site superintender & quality supervisor

  SITE MANAGER dedicated to the management of the workshop, control workshop capacity and productivity inprovement, Work shop planning & cost reduction, quality managment and quality improvment, Education Quality department and Project control in the Aircoolers Aerea.QUALITY MANAGER dedicated to personal training on fitting, assembly activities, hydraulic test activities, prefabrication manifolds and testing.Project control on solving quality and production issue, controlling subcontractor during assembly activities and sub suppiers during productions of components.ASME welding qualifications, qualified quality controllers and inspectors.Interfaces with the client and interface with three resident Inspectors, representative of ORIGIN Energy Quality surveillance.Preparation and Issued of Quality Manual for Manufacture Licensing System Document of PRESSURE VESSEL in CHINA market.AUSTRALIAN PACIFIC LNG CSG PROCESSING PTY PRJ.: Assembling of 96 Low noise and ultra low noise Air Cooler Heat exchangers consisting of Steel structures, exchanger in CS, SS and duplex, Fans . Performing Run Test with presend ORIGIN Energy representative in accordance to API 661.Prefabrication of inlet and out let Manifolds Large bore in KNM Workshop all in according to ASME VIII, B-31.3 and API 661.AUSTRALIAN PACIFIC LNG CSG PROCESSING PTY PRJ.: Assembling of 42 Low noise Air Cooler Heat exchanger consisting of Steel structures, exchanger in CS, SS and duplex, FAns . Performing Run Test with presend ORIGIN Energy representative, in according to AP 661.Prefabrication of inlet and out let Manifolds Large bore in KNM Workshop all in according to ASME VIII, B-31.3 and API 661.IMOURAREN URANIUM PROJECT- Technip FranceConstruction of Air Cooler Condenser Package consisting of Steel structures, 24 exchangers, Manifold long 46 Mt, Steam Duct and Piping Line in CS. The supply is in compliance with ASME VIII, B 31.3 and API 661 requirements. Show less

• 

  Amal - construções metálicas s.a.

  Jan 2014 - Jan 2016

  TOTAL RAFFINADERIJ ANTWERPEN in Belgium. OPTARA PROJECT :PROJECT MECHANICAL / ERECTIONClient: TOTAL Tecnicas RiunidasQuality Control specialist and Site Quality Control c/o the Quality Control department of AMAL-SA Portugal involved in the Construction of Refinery in Antwerpen (Belgium) OPTARA PROJECT with the following duties:Reviewing and commenting on QCP and quality documents, produce on behalf of sub-contractor, Project ITP’s and procedures / review by Project documentation as like ITP's . PMI & NDT and COATING PROCEDURE, DOCUMENT CONTROL PROCEDURE, TORQUING AND TENSIONING PROCEDURE, ERECTION PROCEDURE for INTERNAL OF COLUMN, Ect.Contractor audits schedules for Prefabrication and Painting and TSA Coating supply.SITE QUALITY CONTROL with follwoing duties:1) Responsable of Equipment and Steel Structures Quality Managment:- Receiving, Inspection and Preservation of EQUIPMENTS (Modules, Cinmeny, Air Coolers, heat exchangers, Vessel and Tanks, pumps, Skid, etc,) and Steel Structures- Precommissioning Assistant, Pre commisioning & Quality control.Responsable of intermediate and final inspections.2) Responsable of Painting and Coating Managment:-Receiving and preparing LB and SB Spools fabricated for painting activities,Suppliers Managment Coating Yard and Caoating WorkShop.-Painting reporting progress status as per CONTRACT and Technical specification requirement. 3) Responsable of TOPOGRAPHIC SUREVEY and managing Topographers Supplier for Survey, -Reporting CIVIL WORKS. Responsable for Civil Acceptance Certificate and Topographic Report and Grouting certificates, Levelling Fange Nozzle elevation, Verticality of Static Equipment and Rotary Equipment. Show less TALISMAN MONTROSE BLP : Piping Pre-fabrication, Install & Erection Project-OIL & GAS Client: Heerema Zwijndrecht BV on Project Management Team, Link between Client and Sub Contractors, with following responsibilities: • Study and understand all relevant project documents and conditions • Ensure EPC sub contractor and planning and reporting• Monitor EPC sub contractors schedule and progress with progress and milestone verification to support payment and monitor PMC cost and manpower • Review EPC sub contractor's proposals for changes in the work.• scheduling and forecasting to meeting the overall project completion date.• Review EPC contractor's actual progress against planned progress • Attend regular progress meetings• Monitoring Erection Measurement• Provide FCN cost and extra hours to charge to CLIENT• Control and Problem solving on quality issue related to TSA coating on Spools prefabricated, Controlling of possible cost and claims from Client Show less

  • Site Quality Specialist/ Quality Control

    Aug 2014 - Jan 2016

  • Project Controller and Quality Supervisor

    Jan 2014 - Aug 2014
• 

  Siderba

  Jan 2016 - May 2016

  Site quality specialist

  TOTAL RAFFINADERIJ ANTWERPEN in Belgium. OPTARA PROJECT :PROJECT MECHANICAL / ERECTIONClient: TOTAL Quality Control specialist and Site Quality Control c/o the Quality Control department of AMAL-SA Portugal involved in the Construction of Refinery in Antwerpen (Belgium) OPTARA PROJECT with the following duties:Reviewing and commenting on QCP and quality documents, produce on behalf of sub-contractor, Project ITP’s and procedures / review by Project documentation as like ITP's . PMI & NDT and COATING PROCEDURE, DOCUMENT CONTROL PROCEDURE, TORQUING AND TENSIONING PROCEDURE, ERECTION PROCEDURE for INTERNAL OF COLUMN, Ect.Contractor audits schedules for Prefabrication and Painting and TSA Coating supply.SITE QUALITY CONTROL with follwoing duties:1) Responsable of Equipment and Steel Structures Quality Managment:- Receiving, Inspection and Preservation of EQUIPMENTS (Modules, Cinmeny, Air Coolers, heat exchangers, Vessel and Tanks, pumps, Skid, etc,) and Steel Structures- Precommissioning Assistant, Pre commisioning & Quality control.Responsable of intermediate and final inspections.2) Responsable of Painting and Coating Managment:-Receiving and preparing LB and SB Spools fabricated for painting activities,Suppliers managment Managment Coating Yard and Caoating WorkShop.-Painting reporting progress status as per CONTRACT and Technical specification requirement. 3) Responsable of TOPOGRAPHIC SUREVEY and managing Topographers Supplier for Survey, -Reporting CIVIL WORKS. Responsable for Civil Acceptance Certificate and Topographic Report and Grouting certificates, Levelling Fange Nozzle elevation, Verticality of Static Equipment and Rotary Equipment. Show less

• 

  Gotti giuseppe srl

  Jun 2018 - Sept 2020

  Project coordinator

  Support to Tecnichal dept. Quality and Project Management .Support for ISO 9001:2015 and ISO 3834-2:2006 audit and updating.Support on Internal Procedure issues for CLIENT AUDIT International and NazionalSupport of Non Conformity ManagmentSupport and interface with National and International Client.Support for Final Data Book issuesSupport of Management for CLAIM issues.

• 

  Blutek s.r.l.

  Feb 2019 - Sept 2020

  Quality control manager

  Quality Control Manager

• 

  Simind costruzioni e montaggi industriali s.r.l.

  Sept 2020 - Jul 2022

  Quality control manager and welding inspector cswip 3.1 2° lev

  Project management, production supervising and quality management are activity involved on skid assembling project, prefabbrication of pressure vessel and piping following ASME and EN normative requirement.

• 

  Siad macchine impianti

  Jul 2022 - now

  Senior project inspector & welding inspector cswip 3.1 liv 2