Michael M.

Experience

• 

  AcePLP

  Aug 2017 - Mar 2022

  Project: AirTrunk C&D (Busway)/ Facebook SGA (Load Bank)/ P78 (FPSO)• Lead, monitor, and control of the performance of customer’s project life cycle – Project Initiation, Project Planning, Project Execution and Controlling, and Project Closing• Key activities include task completion verification, project team monitoring, managing the exchange of project updates across the project team members, schedule reporting, issue resolution, scope change, variation claim and contract administration• Validate the project, including technical and commercial elements• Monitor the execution of the customer’s project order and verify the execution of the project through kick-off meetings• Communicate with all parties including exchange of technical requirements and project plan information, site acceptance, and site energization preparation• Lead the closeout of the customer’s project to include financial reconciliation, verification of job site equipment arrival, installation, start-up, and training support completion• Solve problems with customers that results in positive feedback and enhanced relationships• Apply a base knowledge of Schneider Electric products and their uses• Demonstrate an understanding of the fundamental knowledge, processes and terminology needed for effective project management• Manage, control, and supervise site activities, such as conducting site risk assessments, and providing guidance to vendors for installation, testing and commissioning. Show less In-House Project AutoCAD & Microstation 2D & Revit• Generated Architectural drawing with the appropriate dimensions, scale and layers (Complied to CP83).• Documented Electrical Schematic diagrams.• Prepared site plan based on the given coordinates.• Constructed documentations of mechanical parts.• Plot/Print documentation with the company's title block. AutoCAD & Microstation 3D• Prepared Isometric diagram for easy visualisation of the electrical schematic diagram.• Constructed 3D documentation of mechanical parts CSD/SEM• Generated appropriate documentation according to the company's standard practices for the management of Combined services to allow easier visualisation on site.• Prepared construction plans and sections on the company's title block. Autodesk Revit Architecture• Generated 3D building information model for visualisation of projects.• Rendered images of the interior and exterior spaces.• Able to document technical drawings and plot for construction/tender stages. Autodesk Revit Structure• Generated 3D building information model for easy visualisation of projects.• Understand the basics of building structures.• Able to document technical drawings and plot for construction/tender stages.Autodesk Revit MEP• Generated 3D building information model for visualisation of projects.• Understand the basics of building structures.• Able to document technical drawings and plot for construction/tender stages.After the in house project, I attached to DSCO Group, ABB, Thales, Samsung C&T Corporation, SDK Consortium, Gammon and Schneider Electric as outsourcing. Show less Project Involved: ARKEMA PROJECT SYMPHONY AT BANYAN AVENUE JURONG ISLANDAs a BIM Coordinator• Establish the drawing schedule for Architecture, Precast items.• Create and review Archi model for submission and presentation. • Coordinate Architecture, Structure, M&E model.• Prepare FSSD Submission.• Laise with the Head of Building, Structure Engineer and site team. Create and Review the precast items (Precast Slab, Column, Beam, Wall, Parapet) shop drawings.• Report to the head of building for the status, current issues and solutions. Show less Project: Woodlands Health CampusWorking as a BIM Engineer.Involved in:1. Creation of Revit Family; (2018/05-End)2. Creation Dynamo and Macro; (2018/08-End)3. Coordinating with Archi, STR team, Sub-cons; (2018/05-End)4. Create a standard of the 'Structural Wall Penetration Subcon Submission to SDK Standard', set up a meeting and present to Subcon PE and coordinator and Modellers; 5. Prepare HS01 and HS02 Structural Rebar Detail Shop Drawings; (2018/07-2018/08)6. Update a part of Staircase model and Core Wall model; (2018/08-2018/09)7. Modify Blast Valve model and create penetration model prepare shop drawings to submit to consultants, attending necessary meetings; (2018/09-2018/12)8. Coordinate and update the M&E model base on M&E design changes, Structural, Archi clashes, and consultant comments; (2018/05-Present)9. Façade Pre-cast Wall, STR Slab & Wall Penetration Model; (2018/05-2019/12)10. Coordinate, prepare and check the submission drawing of CSD for basement and L1, L3 Tower 1-8; (2019/12-2020/03)11. Coordinate the Roombook M&E services for L3-7 LTC. 2020/6-End) Show less Assigned to two Taiwan LRT projects in Thales International Asia as a BIM engineer.1. Use software "IP Video System Design Tool" to design the deployment of CCTV and analysis coverage for CCTV.2. Using AutoCAD to generate CCTV deployment drawing and CCTV coverage drawing.3. Using AutoCAD to generate Clock, PIDS, Speaker, Noise Sensor, WIFI Antenna symbols etc for deployment drawings.4. Assist to prepare the design document for CCTV, PAS, PIDS, RCS and Clock System.5. Making Title blocks in two languages (English & Traditional Chinese) and assisted in document translations. Show less Project: DSO National Laboratory Data Center• Working as an M&E engineer and CAD drafter with ACMV design team.• Drafted all necessary Blocks for schematic and floor plan drawings.• Generated ACMV (including Purging Air and Fan Coil Units, Mechanical Ventilation, Chilled Water System, Condenser Water System, Water Leak Detection) and Plumbing Schematic drawings for 4 Storeys including the Roof of the building.• Generated ACMV floor plan equipment layout.• Coordinate with other M&E Engineer and Design Manager. Show less

  • Project Manager at Schneider Electric

    Mar 2021 - Mar 2022

  • Senior BIM Specialist

    Jun 2017 - Mar 2022

  • M&E Coordinator at Gammon Construction Limited

    Jan 2021 - Mar 2021

  • BIM Modeller+Coordinator at SDK CONSORTIUM

    May 2018 - Jan 2021

  • CAD Operator at Samsung C&T Corporation

    Mar 2018 - Apr 2018

  • Software Engineer at Thales

    Oct 2017 - Mar 2018

  • BIM Modeller at ABB

    Sept 2017 - Oct 2017

  • Assistant Mechanical Engineer at DSCO Group

    Aug 2017 - Sept 2017
• 

  Digie Engineering Technology Pte. Ltd.

  Mar 2022 - now

  Project: Singapore Tuas Nexus, EPC2, Integrated Waste Management Facility (IWMF) • Manage BIM team Standard and BEP, SOP establishment• Manage Offsite BIM team in different region• Lead on 3D Multi-Discipline Coordination and 4D related works• Establish the EICA, ELEC PANEL, LIGHTNING PROTECTION Model template, and lead in model updating• Prepare the shop drawing standard and train offsite to produce deliverable model/ drawing• Provide training to the offsite team and EC teams as well as internal engineers on BIM Collaborate Pro (CDE)• Lead the Bi-Weekly BIM Interface Meeting with all other Main Contractors from other package• Lead the Bi-Weekly BIM Coordination Meeting with all EC and all Suppliers and create issues for the Clash Report on a Bi-weekly basis • Create and Lead Archi/ STR/ M&E focus BIM Coordination meetings when necessary• Attend the BIM Architecture Meeting when necessary and do necessary coordination• Attend the Process Model Review and do necessary coordination• Solve problems with customers that results a positive feedback and enhanced relationships• Provide Engineering design solution for created issues• Provide software issues solution Show less

  • BIM Manager

    Jun 2024 - now

  • BIM Lead

    Mar 2022 - now