Wael Shaher Roustom

Experience

• 

  Syrian petroleum company

  Nov 2000 - Dec 2000

  Electrical Engineer

  Electrical Engineer responsible for installations and maintenance of electrical equipment belong to production and exploration oil rigs .Project Name : Drilling DepartmentDescription : Located at Al-Jbessah Oil Field North East of Syria; produces 35,000.00 oil barrels per day.

• 

  Syrian Petroleum Company Representative in ConocoPhillips - CSDGL

  Jan 2001 - Dec 2003

  Electrical Engineer

  Electrical Engineer during the construction and operation of a new gas plant and 11 remote gas gathering station. I was responsible for the electrical and instrument activities in 06 Gas compressor stations and to expedite with contractor & suppliers (materials, purchase orders, spare parts ) for: • First Gas plant sharing between Syrian Petroleum Company and CONOCOPHILLIPS USA.• Contain two gas streams. (one for natural gas(325 Million Cubic Feet per day with 76 bar from 05 Natural gas wells),the second stream is for the associate gas (175 Million Cubic Feet per day, 35 bar on slug catcher) gather from 06 compressor Gas stations and 05 Gas gathering stations)• The project has electrical outdoor substation [1x(66/20KV)+2X(66/6.6KV)]3MVA (by Schneider) supply by 2 X 66KV, 5.2 MVA overhead lines.66KV AND 20 KV SWGR, MCC for motors 6.6 KV& 0.4 KV.• Six gas compressors driving by induction motor (ABB) 1000 rpm by VFD system 2500-4500 KVA, ABB Switzerland ,by Drive transformer 20/3.3 KV (2or4 secondary) ABB - Finland and 20/0.4KV, 630 KVA power service transformers.• Six Gas Turbines NUOVO PIGNONE PGT10B/2 (start motor 6.6 KV,200 KVA), oil heater pumps (6.6KV, 250 KVA). Un-interruptible Power Supplies Merlin Gerin.• Products :- 130 Million Cubic Feet per day non-saturated gas for export line.- 200 Million Cubic Feet per day Non-saturated gas for re-injection.- 20,000 barrel per day Condensate.- 800,000 barrel per day LPG.The above production data was recorded in 2001. Show less

• 

  Saudi Services For Electro Mechanic Works co. (Closed Joint Stock Company)

  Jan 2004 - Sept 2006

  Project Engineer

  I Worked as Electrical Project Engineer In SSEM for 2.8 Yeras, I was responsible for the followings: • Review and approval all Electrical engineering deliverable developed by consultant including calculation report, specifications and design drawings• Preparation of material take off's equipment/ material requisitions related to projects.• Preparation of quotations for electrical equipment and materials.• Evaluation of vendor's technical commercial proposals, and providing recommendations.• Preparation of cost sheets and BOQ's.• Preparation of technical proposal for tender submission.1st Project was Extension of Al-Rashid Mall building (new 5 floors) containing eight electrical Substations, ring connection through ring main units each (13.8/0.48KV, 1250 KVA Dry Type Transformers, ATS & RMU 630 Amp).• Car parking (11 floors) it’s capacity 1850 cars.• Hypermarket and 103 rental apartments. • Bridge 2 floors(80shops) connecting all the above buildings. • Chillier water plant designed by TABRED(UAE) with 2 X (13.8/4.16 KV , 4/5.2 MVA) + 2 X (13.8/0.4 KV, 4/5.2 MVA) Wescosa Transformers, 13.8KV Switchgear 1200A, 750MVA (GE) + 4.16KV Switchgear with MV starters and capacitor 1200A, 250MVA with GE limit amp + 08 X 2425 KVA, 4.16kv, 1800rpm, 60HZ@500C Diesel GenSet (Leroy Somer), (08) Air Cooled Chillers, Chillers (04), cooling Towers (04), thermo storage tank (02), R.O plant, different types of pumps (fire, chilled water, primary & secondary, etc.).• The total power capacity for project is 32,8 MVA supplied partially by SCECO network 18 MVA and remaining from Prime GenSet in Chillier Plant.2nd Project was Reinforcement Al Talimi Substations 03 Nos 69/13.8 KV Consist of three electrical substations (69/13,8 KV), Al-Talemi , AL- Khobar industrial and Air defense S/S’s. Replace the main breakers and protection relays by numerical types Show less

• 

  Khatib & Alami CEC

  Sept 2006 - Jul 2016

  Senior Manager -Electrical

  • Lead and manage the Electrical (Qatar) Section towards achieving the targets included in the Electrical Department business plan• Lead buildings / Infrastructure / Dry utilities electrical design activities in the Qatar design center, including the design of Dry utilities networks and corridors, low voltage systems, low current systems (e.g. telecommunication, fire alarms, CCTV), etc.• Define Electrical (Qatar) Section scope, capacity and capability required to deliver projects and outsourcing• Support Project Managers through validating electrical man-hours for the project management plans• Oversee the assignment of electrical engineers, including a team leader, to project teams, as required by project• Oversee design development of the electrical design teams within Electrical (Qatar) Section at all stages (concept design, schematic design, draft final design and construction documents)• Support electrical project teams in resolving escalated technical issues, as needed• Review design deliverables prepared by the Electrical (Qatar) Section, and ensure implementation of quality control measures• Support the addressing of the clients’ electrical design clarifications and queries during the construction supervision stage• Support the assessment of electrical design changes and resulting claims during the construction supervision stage• Ensure/ enforce close coordination and knowledge sharing between the Electrical (Qatar) Section and Electrical Sections in other design center within the K&A network through periodic meetings• Enforce corporate policies and procedures within the Electrical (Qatar) Section• Manage design team from concept design through to construction issue and site supervision.• Set and maintain standards for design of electrical and low currents systems.• Review and manage the preparation design drawings, calculation and reports.• Liaise with the Local Authorities Show less

• 

  Jacobs

  Aug 2016 - now

  1- Project Management Program.2- Engineering Management.3- Design of Electrical systems (MV, LV, Lighting, Small power, Earthing, Lightning protection, UPS, Emergency lighting, etc.)4- Sustainability Engineering requirements.5- Client and stakeholder management6- Direct and manage design deliverables to wide range of design and supervision projects.7- Manage the process of proposals since receiving the invitation to submit the proposal to the client.8- Lead and manage Design team, MEP Design team to carry out project’s deliverables and achieve company goals and targets.9- Design electrical and low current systems for Health care facilities, Marine ports, Airports, infrastructure facilities (pumping stations and roads), Transportation, High rise Buildings, Industrial, Oil& gas and commercial projects.10- Participate in client negotiations, preparing technical tender documents, design bases reports, and concept design and detail design reports.11- Liaise with the local authorities QATAR, UAE, and KSA to get the required approvals for Electricity, Fire alarm, Emergency lighting, Security ACS, CCTV, ITS, and SCADA systems.12- Lead and participate technical meetings with the client, end-user and local authorities. Show less - Define project scope, capacity and required capability to deliver projects and outsourcing. Prepare the project cost and estimate the required resources, subconsultants and preparr the project deliverables.-Ensure all design and supervision teams follow the related International standards, local regulations, and company procedures and policies.-Prepare, Review and manage the preparation design drawings, calculations and reports. Manage QA/QC and the checking of all design and supervision works carried out prior to formal issue. Liaise with the Local Authorities in State of Qatar, UAE, and KSA, to collect the required building permit approvals.- Review the design deliverables prepared by the design team, and ensure implementation of quality control measures.- Support the addressing of the clients’ design clarifications and queries during the construction supervision stage.- Support the assessment of design changes and resulting claims during the construction supervision stage..Manage and Lead the design team, from concept design stage through to construction issue and site supervision. Set and maintain standards for design deliverables.. Review and manage the preparation design drawings, calculation and reports. Show less

  • Principal MEP Engineer, Project Manager

    Aug 2016 - now

  • Buildings Lead, Project Manager

    Aug 2016 - Oct 2022