Rodney Carr

Experience

• 

  Nortel Networks

  Jan 1991 - Nov 2001

  Engineering Technician – Diagnostics Department

  Responsible for performing the installation, modification, testing, and servicing on all internal/in-house data communications network equipment. Tested and Troubleshot Digital Multiplex Systems. Digital Multiplex System (DMS) is the name shared among several different telephony product lines from Nortel Networks for wireline and wireless operators. Among them are the DMS-1, Rural/Urban digital loop carrier, the DMS-10 telephone switch, the DMS SuperNode family of telephone switches (DMS-100, DMS-200, DMS-250, DMS-300, DMS-500, DMS-GSP, DMS-MSC, DMS-MTX), and the S/DMS optical transmission systems.• Consistently reviews quality yields and develops corrective actions to eliminate any yield detractors, further improves the process and product reliability. Works with the Quality Engineer• Assists with the fabrication and development of new equipment, fixtures, and test programs. • Ensures that effective preventive maintenance, calibration, diagnostics, re-qualification, and daily measurement schedules are in place for each test and burn-in process. • Coordinates manufacturing, maintenance, and engineering preventive maintenance activities. • Assists engineering and the development labs with all new product introduction and development - JTAG• Ensures that each test and burn-in process have a training/certification package for both manufacturing and maintenance. Facilitates the completion of these training/certification packages with the appropriate engineer(s) and the Resource Development Department. • Coordinates recovery/repair activities with the respective maintenance, technicians, engineers, suppliers, and maintenance spare parts analyzers whose area of competence is necessary to get the process back in working order. • Coordinates the development of disaster recovery plans for each test and burn-in process within the area of responsibility. Troubleshoots/debugs at multiple system levels. Performs module verification. Show less

• 

  CMAC Inc.

  Nov 2001 - Sept 2004

  Engineering Technician – Diagnostics Department

  • Performs complex engineering tests, checkouts, and development engineering tasks. • Diagnoses and isolates malfunctions to the component level. • Analyzes engineering test results and implements changes to resolve problems. • Conducts operations tests and fault isolation on development systems and equipment to ensure conformance with design specifications, collecting data, analyzing results, and implementing procedures. • Reviews project instructions and blueprints to ascertain test specifications, procedures, objectives, test equipment, nature of technical problem and possible solutions such as part redesign, substitution of material or parts or rearrangement of parts or subassemblies. • Sets up and conducts tests of complete units and components under operational conditions to investigate design, or to obtain data for development, standardization, quality control and problem resolution • Analyzes indicated and calculated test results in relation to design or rated specifications and test objectives and modifies or adjusts equipment to meet specifications. • Records test procedures and results, numerical and graphical data, and recommendations for changes in product or test method. • Maintains software, documentation and equipment to the latest revision or operational specifications. • Assists engineers in developing and designing hardware and software required to test customer products per their specifications. • Trains technicians and operators on products, processes, and equipment.• Assists with presentations and interfaces with customers. • Assists engineers with outside third-party developments • Organizes documentation (specifications, schematics, and procedures Show less

• 

  Solectron

  Sept 2004 - Feb 2007

  Engineering Technician – Diagnostics Department

  • Supported engineering activities such as design, test, modification, fabrication and assembly of prototype, electro-mechanical systems. Position is also responsible for front-line support of product movement throughout the process. • Reviews project instructions and blueprints to ascertain test specifications, procedures, objectives, test equipment, nature of technical problem and possible solutions such as part redesign, substitution of material or parts or rearrangement of parts or subassemblies. • Devises, fabricates, and assembles new or modified mechanical components or assemblies for products such as industrial equipment and machinery, power equipment, server systems, machine tools and measuring instruments. • Sets up and conducts tests of complete units and components under operational conditions to investigate design proposals for improving equipment performance or other factors, or to obtain data for development, standardization, quality control and problem resolution • Analyzes indicated and calculated test results in relation to design or rated specifications and test objectives and modifies or adjusts equipment to meet specifications. • Records test procedures and results, numerical and graphical data, and recommendations for changes in product or test method. • Maintains software, documentation and equipment to the latest revision or operational specifications. • Assists engineers in developing and designing hardware and software required to test customer products per their specifications. • Tests and provides debug assistance to the manufacturing area. • Trained technicians and operators on products, processes, and equipment. Show less

• 

  Flextronics Corporation

  Feb 2007 - Jun 2018

  Engineering Technician

  • Directs and/or coordinates electronic engineering and/or technical personnel in fabrication and design of testing and test control apparatus and equipment, or software and systems testing.• Directs and coordinates electronic engineering activities concerned with development, procurement, installation and calibration of instruments, equipment and control devices required to test, telemeter and record test data.• Determines conditions under which tests are to be conducted and sequences and phases of test operations.• Interfaces and confers with scientific, engineering, and technical personnel to resolve testing problems such as product or system malfunctions, incomplete test data, data interpretation or coding issues.• Analyzes and interprets test data and prepares technical reports for use by electronic or software engineering, and management personnel.• Develops or uses computer software and hardware to conduct tests on electronic products and systems or software.• Trains and instructs floor support, test technicians and test operators on test hardware and/or software, as well as proper problem-solving techniques.• Resolves test yield problems by performing analysis of root causes, developing, and coordinating corrective action measures and monitoring improvements.● Supports quality comprehensive test programs.● Performs written analysis of fault grade.● Performs test ability analysis (DFT).● Performs mechanical analysis of test fixtures.● Modifies test programs using various languages (i.e., C++, Pascal, Lab Windows, LabView, etc.).● Supports diagnostic tests at the card edge level.● Supports functional test hardware, computer platforms and interfaces.● Supports test plans and procedures.● Supports environmental test programs, procedures and profiles.● Supports mechanical/electrical interfaces for product tests.● Performs failure analysis on environmental test failures.● Modifies software or system level plans and tests. Show less

• 

  Eaton

  Feb 2018 - now

  The Lead Validation Engineering Technician is an role providing support for launching new Eaton network connectivity software and hardware products through evaluation and defect identification.In this function:• Work with engineers to evaluate new software and network products.• Perform manual and automated tests for UIs, network protocols (Modbus, BACnet, SNMP) and associated power systems.• Write test defects and collaborate with Development, Service and Technical Support in defect resolution.• Collaborate and coordinate testing with global teams.• Test lab maintenance and organization. Show less • I am responsible for performing testing, troubleshooting, and repair on three-phase medium and high voltage UPS and power management systems to ensure products are repaired and tested to defined specifications. The incumbent needs to communicate effectively with cross functional departments to resolve and correct repair issues, including but not limited to engineering, production, quality, operations, contractors.• Read and interpret electronic schematics for UPS Systems• Responsible for reporting any non-conformance items by utilizing our quality management guidelines• Recommend modifications and improvements to enhance the products for quality, reliability, manufacturability, and cost effectiveness• Instruct and communicate with Production Associates, Quality Engineering Technician, Manufacturing Engineers and Test Engineers to resolve daily production and warranty issues• Check and maintain equipment to ensure compliance with ISO 9000:2000 standards• Identify and implement corrective actions for the repair, replacement and calibration of tools and equipment• Adhere to all environmental, health, safety policies and procedures, and work instructions• Use the principles of 5S+ to ensure a clean and organized work area• Promotes goals, philosophies, & encourages continuous improvement• Cross train with peer technicians on products, test equipment, procedures, and formal communication aspects of the job function• Responsible for ensuring functional quality of manufactured products in accordance with established test and assembly procedures, workmanship standards, and ISO 9001:2015 and EQMS. • You will document failures on products returned on RMA and respond to Corrective Action Requests• Train and educate associates in ESD protection and provide leadership-by-example• Maintain test racks, cords, cables, and fixtures in reliable operating condition• Support Eaton’s continuous improvement objectives through active participation and teamwork. Show less

  • Lead Validation Engineering Technician

    Oct 2022 - now

  • Electrical Repair Technician II

    Feb 2018 - Oct 2022