SACHIN DETHE

Experience

• 

  M/S. Offshore Hook-up & Construction Services (I) Pvt. Ltd

  May 2000 - May 2007

  Project Engineer (Hook Up and Pre- Commissioning)

   Responsible for Pre / Post bid survey. Study Scope of work, Planning & execution of all construction related activities including work force management. Preparation of MTO & Identify consumables and raise requisitions as required.  Preparation of Job card / Task sheet Identify special tools, equipment and vendor requirements for Hook-up and commissioning activities. Identify material shortages and raise requisitions as required. Monitor and follow up ETA's of outstanding materials.  Carry out Toolbox talk with sub ordinates (Construction Group from Yard) before handing over the task to them and get the feedback from them by end of the day. Co-ordinate with all discipline Engineers for any clashes during the execution of work and prepare as built drawings. Liaise / Interaction with Engineering & construction team and vendors. Responsible for Construction Hook up activities to complete all the Piping Tie-In’s as per the construction Schedule and Identify Golden Tie ins. Responsible to get Calibration done for field instruments as per approved datasheet. Responsible to get done Cable laying, Glanding & termination as per wiring diagram in field & inside control room, Tube laying & Instrument installation as per Hook-Up drawing. Involvement in Piping Test packs (Includes Welding Inspection Reports, Hydrotest / Sensitive Leak Test, Preservations), Instrument loop checking, Pre- commissioning & offering stage wise client inspection. Attending the action plan meetings with the Construction / Project manager for completing the project within time limit and budget. Supervise safety and liaise with the safety representatives. Show less

• 

  McDermott International Inc.

  Jun 2007 - Jun 2012

  Lead Commissioning Engineer

   Marking of System and Sub- System limits on drawings. Develop function test procedures for different systems, Sub Systems / packages. Participation in FAT for E&I equipment’s like Hydraulic Well Head Control Panel, ESD, RTU & SCADA System. Participate in Design Review and HAZOP workshop. Responsible for SAT of WHCP, ESD, SCADA, DCS and F&G system. Planning & execution of pre-commissioning / commissioning activities including work force management. Identify material shortages and raise requisitions as required. Monitor and follow up ETA's of outstanding materials.  Identify special tools, equipment’s and vendor requirements for Pre-Commissioning / Commissioning activities, Vendor co-ordination for Pre-commissioning & commissioning activities. Perform all the Pre-commissioning activities such as, Piping / Pipeline Gross (Sensitive) leak test, Instruments Loop Testing, Logic and Function Test (Cause and Effect Test), Motor No Load and Load Test. Responsible for Project Completion Management system (i.e. PIMS) from Mechanical Completion to ‘B’ Check sheet till all certifications like, Ready for Commissioning Certification (RFCC), Ready for Start up Certification, Liaise / Interaction with Engineering & construction team and vendors. Attend Internal McDermott Meetings such as 4 Week look ahead, Weekly Progress Meetings as well as Client Meetings for Project Progress. Participation in HAZID study and attending the action plan meetings with the operations & project management team for various action plans for completing the project within time limit and budget.  Supervise safety and liaise with the safety representatives for different QHSE trainings for project team. Preparation of Red Line Mark Up for Final as built drawings. Liable for dossier preparation as per Client specification and requirement. Show less

• 

  Petroleum Development Oman

  Oct 2012 - Sept 2022

  Study Scope of work and prepare Commissioning Plan and Schedule in line with Project Schedule.Review and Approve of System and Sub- System limits on drawings.Review Contractors CMS (WinPCS/CCMS/Zenator/GoTech) database for each Discipline.Review project technical documentation CSU Procedures, Vendor Schedule as per the Scope.Participate in Design Reviews, HAZID/HAZOP reviews, FAT/SAT, Pre-start up Audit (PSUA).Ensure availability of required Manpower, Material, Spares, Special Tools, Consumables, Test Equipment and First Fills are arranged by Contractor to Carry out smooth Commissioning.Ensure Internal Interfaces are aligned between Commissioning Discipline (MEPI)Conduct Tri party Line walk for MC / PC along with Construction and Operation Team.Witness / Perform the Major Rotating Equipment’s Installation and Cold / HOT alignment, Piping / Pipeline Hydro test, N2 Leak Test and all Pre-commissioning activities like Loop tests, Logic and Function Tests as per Operating, Control and Safeguarding narrative. HV Motor No Load and Load Test, HV Pump’s Lube oil Hydrostatic & Flushing testing, HV Pump’s Mechanical Seal’s Hydrostatic Pressure testing. LV / HV Switch rack Scheme Test, Grounding and Bonding Checks, Protection relay Test, CT / PT Tests, HV Cables Megger tests - Hi Pot tests, CB Hi Pot tests.Perform the Commissioning and Start Up along with operation team for Pump 72 Hrs. Run Test and 30 days Projects Reliability testAttend Project Progress Meetings with Contractor and PDO Operations Team.Punch Point management – Raise, Monitor, Witness and Close.Review and endorse signature on Commissioning Handover Dossiers submitted by EPC Contractor, which includes ITR’s, Test Certificates, Red Line Mark Up’s, MRB, Manuals, SAP registration for BOM / MCP, eSPIR and Handover to Operation.Handle any abnormal event, near Miss in a timely manner. Participate and coordinate P2A (Project to Asset handover) meetings till project close out. Show less

  • Lead Commissioning and Start up Engineer / Field Operations Engineer

    Aug 2017 - Sept 2022

  • Commissioning and Start Up Engineer

    Oct 2014 - Aug 2017

  • Commissioning Engineer

    Oct 2012 - Oct 2014
• 

  Enerflex Water Solutions

  Oct 2022 - Jul 2023

  Lead I&C Commissioning Engineer

   Perform System and Sub- System limits on drawings. Prepare project technical documentation Commissioning database for Completions Management Systems like CCMS/ WinPCS, C0mmissioning & Start up Procedures, Vendor Schedule, Start up Plans as per the contractual requirements. Provide Inputs for Commissioning L4 Schedule. Participate in Design Reviews, HAZID / HAZOP reviews, Pre-start up Audit (PSUA). Perform / Witness Pre-commissioning (Instrument Field Calibration, Loop Checks), performed by EPC contractor. Review Factory Acceptance Test (FAT) Reports, Participate and witness SAT & Site Integration Test (SIT) for DCS/ESD/IPS/F&G systems performed by Vendors. Responsible for Commissioning activities like Logic and Function Test (C&E Tests), Motor No Load Test, Pumps for 72 Hrs. Performance tests / Mechanical Run Tests and Plant 30 days Reliability Test.  Ensure timely updates of ‘A’ and ‘B’ ITR’s, Endorse signature on ‘B’ ITR’s and relevant certifications.  Provide / Update progress to Completions Management System, Attend Project Progress Meetings with Contractor and Management. Punch Point management – Raise, Monitor, Witness and Close. After close out of all the pending ‘A’ Punch points, PSUA points and ‘SoF’ perform Start Up. Ensure MC / PC Dossiers submitted by EPC Contractor are with all the required Documents as per TIER 1 & 2 list and Handover to Operations which includes ITR’s, Test Certificates, Red Line Mark Up’s, Manual’s and Procedures. Show less

• 

  Special Technical Services L.L.C., Oman (STS)

  Dec 2023 - now

  Lead Commissioning Engineer

  Roles & Responsibilities: Prepare System and Sub- System limits on drawings and Review CCMS database for each Discipline. Develop function test procedures for different systems, Sub Systems / packages. Marking of limit, Valve Positions, End Blinds for N2 Gross Leak test on the P& ID (PEFS). Review FAT documents and participate in SAT and ISAT for DCS, IPS, F&G System and Condition Monitoring System, WI / DWD / MOL HP Pumps, IA Compressor Package, CI Skids, HV Switchgear sub-station. Participate in Design Review and HAZOP workshop. Planning & execution of pre-commissioning / commissioning activities including work force management for Mechanical, Electrical and Instrumentation / C&A. Identify special tools, equipment’s and vendor requirements for Pre-Commissioning / Commissioning activities. Ensuring availability of Commissioning Spares, 2 years Maintenance Spares for Handover and e-SPIR list.  Vendor co-ordination for Pre-commissioning & commissioning activities. Perform all the Pre-commissioning activities such as, GIS Switchgear Module Scheme checks, Grounding and Bonding Checks, Protection relay Test, CT / PT Tests, HV Cables Megger tests - Hi Pot tests, CB Hi Pot tests. Piping / Pipeline Gross (Sensitive) leak test, Instruments Loop Testing, Logic and Function Test (Cause and Effect Test), Motor No Load and Load Test (MRT). Responsible for Project Completion Management system (i.e. GoTech) and Punch List management. Liaise / Interaction with Engineering & construction team and vendors. Attend daily Internal inter-discipline Meetings and Weekly Progress Meetings. Daily interaction with Clients and weekly Meetings for Project Progress. Supervise safety and liaise with the safety representatives for different QHSE trainings for project team. Preparation of Red Line Mark Up for Final as built drawings. Liable for dossier preparation (MC / PC) as per Client specification and requirement including TIER 1&2 documents. Show less