Emeka Ngwobia, Msc, NSE, RCOREN.

Experience

• 

  Feldom Engineering Services

  Jul 2010 - Dec 2010

  Assistant Site Engineer

  DUTIES/SKILLS ACQUIRED. Assisted the Site engineer in inspecting the construction on site ensuring it’s in accordance with the site plan and specificationsAssisted the Site engineer in the construction of a Box culvert and u drainage in a Tank Farm located at Warri refinery.Assisted the Site engineer in the taking level using a levelling instrument and also surface preparation.Assisted the site Engineer in the construction of a rigid pavement for a Tank farm of about 30 km2 area.Assisted the Site engineer in assuring that the concrete mix is done in the correct mix ratio. Show less

• 

  Topinlet Control Venture

  Jan 2012 - Feb 2013

  Assistant Proposal Engineer

  DUTIES/SKILL ACQUIREDAssisting the Proposal engineering in preparing construction bids according to ITT documents sent by clients.Assisting in gathering the required documents for the Prequalification of the bid.Assisting the proposal Engineer in interpreting client’s enquiry documents, prepare conceptual designs and draft formal tender responses to tight, customer specified, deadlines.Assisting the Proposal Engineer in to undertake on-going technical and commercial clarification, requested by the clients, throughout the life of the tenders.Assisting the Proposal Engineer to review technical and commercial content of Purchase Orders. Show less

• 

  IMPaC Offshore Engineering GmbH

  Aug 2014 - Nov 2014

  Civil Engineering Intern

  3rd caisson installation and design for BONGA FPSO: deliverable includea. Installation procedureb. Design of lifting materials which includes shackles, pad eyes, spreader beams, slings e.t.cc. Transportation analysis using SACS.D. Sea fastening of Caisson using STADPRO.E. Producing MTO.

• 

  WESTAFRICAN OILFIELD FIELD SERVICES.

  Nov 2014 - Feb 2022

  PROJECT FIELD ENGINEER.

  a. Pre- inspection and post inspection for the Single point CALM BUOY for SPDC.i. Replacement of wornout partsii.Preparation of as-built drawing after refurbishment.iii. Leakage test and hydro testing.iv. Checking the integrity of the pipe product line.v. Modifying the CALM BUOY to be remotely operated.vi. Mechanical testing of the bearing swivel.vii. QAQC Inspection of blasting operation, material inspection, Priming and coating operation to DEP Standards.viii. Structural analysis of the whole system to obtain parts of failure before removal and installing critical members.vix. Project execution procedure for replacing critical structural members which will include rigging plan, scaffolding plan, welding procedure, fitting and finishing procedure.xx. visual inspection, MPI, UT, X - RAY of weld joints.xxi. Calculation of COG for a Riser Clamp. Show less

• 

  Enikkom Construction Limited

  Jan 2016 - Feb 2022

  Coordinate with quality inspection and Sub – contractor and vendors. Leakage test and hydro testing procedures. Checking the integrity of the pipe product line. Coordinate all Non – destructive testing on site with third party contractor. Review of ITP plans for a given HDD project. QAQC Inspection of blasting operation, material inspection, Priming and coating operation to DEP Standards. Checking, monitoring and verify drilled HDD profile. Project execution procedure for replacing critical structural members which will include rigging plan, scaffolding plan, welding procedure, fitting and finishing procedure. Visual inspection, MPI, UT, X - RAY of weld joints. Verify that quality that quality related site activities are in accordance with the applicable codes and standards. Participate in the site internal and external audits. Ensure all quality control documentations is compiled and completed for as built documentation. Control and non-conformance reports and undertake remedial action. Liaise with customers and supplier on all quality issues. Show less PROJECT:1. Horizontal and directional drilling (HDD) for 12’’ pipeline Escravos river crossing for OTUMARA-SAGHARA ESCRAVOS AG SOLUTIONS PIPELINES Project.Client: SPDC/SAIPEM.PROJECT: Installation of 12’’ Diameter gas Pipeline from redeemed camp, Mowe to Shagamu Interchange along Lagos Ibadan express, Ogun State using HDD method.Client: NIPCO PLC.PROJECT: ELP-II ESCRAVOS-LAGOS GAS PIPELINE - 342 KM X 36'' using HDD.Client: NNPC/ZAKHEM DUTIES: Coordinate with quality inspection and Sub – contractor and vendors. Leakage test and hydro testing procedures. Checking the integrity of the pipe product line. Coordinate all Non – destructive testing on site with third party contractor. Review of ITP plans for a given HDD project. QAQC Inspection of blasting operation, material inspection, Priming and coating operation to DEP Standards. Checking, monitoring and verify drilled HDD profile. Project execution procedure for replacing critical structural members which will include rigging plan, scaffolding plan, welding procedure, fitting and finishing procedure. Visual inspection, MPI, UT, X - RAY of weld joints. Verify that quality that quality related site activities are in accordance with the applicable codes and standards. Participate in the site internal and external audits. Ensure all quality control documentations is compiled and completed for as built documentation. Control and non-conformance reports and undertake remedial action. Liaise with customers and supplier on all quality issues. Show less

  • QAQC Engineer

    Feb 2016 - Feb 2022

  • QAQC INSPECTOR.

    Jan 2016 - Jan 2019
• 

  Angle Construction

  Jan 2019 - Nov 2022

  HDD and Pipeline Construction

  • Project Manager

    Dec 2019 - Nov 2022

  • Project Manager

    Jan 2019 - Nov 2022
• 

  PIPELINE INFRASTRUCTURE ENIKKOM JOINT VENTURE

  Jan 2022 - Nov 2022

  QA Lead

  DUTIES/SKILL ACQUIRED1.Coordinate with quality inspection and Sub contractor and vendors.2.Leakage test and hydro testing procedures.Checking the integrity of the pipe product line.3.Coordinate all Non destructive testing on site with third party contractor.4.Review of ITP plans for a given HDD project.QAQC Inspection of blasting operation, material inspection, Priming and coating operation to DEP Standards.5. Checking, monitoring and verify drilled HDD profile.6.Project execution procedure for replacing critical structural members which will include rigging plan, scaffolding plan, welding procedure, fitting and finishing procedure.Visual inspection, MPI, UT, X - RAY of weld joints.7. Verify that quality that quality related site activities are in accordance with the applicable codes and standards.8. Participate in the site internal and external audits.9.Ensure all quality control documentations is compiled and completed for as built documentation. Show less

• 

  ALTRAD/Prezicon limited

  Oct 2022 - now

  Project Engineer

  1.Develop and monitor project schedule to ensure timely completion.2. Act as an interface between project sites and client, to ensure expectations on both sides arefulfilled.3. Act as a technical point of contact for sites and Clients.4. Draft offshore mobilization plan and update timesheets accordingly.5. Prepare all procedures and method statement associated with project execution.6. Evaluate, organize, and advise site as regards prioritizing workload within the planned schedule.7. Assist in deploying human and material resources for project execution8. Assist in tenders and bid packages by providing required technical documents9. Monitor and document site performance and productivity on all sites.10. Visit ongoing onshore and offshore worksites and our PHC operational base as required11. Review all site daily, weekly, progress reports and any other reports from site and compile anoverall progress report to operations team weekly.12. Inform Operations of any deviation from planning in a timely mannerActively take part in QMS activities and processes13. Ensure Quality Objectives are set, tracked, and monitored accordingly14. Complies with company quality policy as well as regulatory and legal requirements to whichcompany subscribes to15. Ensure risks and opportunities are identified and established16. Ensure Stakeholder’s Matrix are established and updated as appropriate17. QMS conformance and customer focus promotion18. Determining opportunities for improvement Show less