Dmitry Ivashkevich

Experience

• 

  "Severgeoldobycha"

  Dec 2000 - Jun 2004

  Welltest operator

  Nenets Okrug, Russia - Carrying out the full complex of works to prepare the downhole equipment (Russian DST КИИ-146, КИИ-95, МИГ-146), including functional checkings and pressure testings.

• 

  Severgeoldobycha

  Dec 2000 - Jun 2004

  Well Test operator

  Carrying out the full complex of works to prepare the downhole equipment (Russian DST КИИ-146, КИИ-95, МИГ-146), including functional checkings and pressure testings.

• 

  Drilling Company "Evrazia"

  Jun 2004 - Apr 2006

  Well Test engineer

  Nenets Okrug, Russia - I was working in the Timan-Pechora oil and gas province (Myadseyskaya, Inzyreiskaya, Perevoznaya, Toraveyskoe, Sarutayusskoe, Varandey, Saremboy etc.). Carrying out the full complex of works to prepare the downhole equipment for Open Hole Jobs (Russian DST КИИ-146, КИИ-95, МИГ-146), including functional checkings and pressure testings. Supervising of all procedures for well testing operations.

• 

  Evrazia

  Jun 2004 - Apr 2006

  Well Test engineer

  Drilling Company "Evrazia" Nenets Okrug - I was working in the Timan-Pechora oil and gas province (Myadseyskaya, Inzyreiskaya, Perevoznaya, Toraveyskoe, Sarutayusskoe, Varandey, Saremboy). Carrying out the full complex of works to prepare the downhole equipment for Open Hole Jobs (Russian DST КИИ-146, КИИ-95, МИГ-146), including functional checkings and pressure testings. Supervising of all procedures for well testing operations.

• 

  Gazflot

  Apr 2006 - May 2014

  Carrying out the full package of Well test job including:o Drillstem test (Halliburton\OD 3,9"\5"):- To operate, disassembly, assembly and test of Packers, Jars, LPR-N,OMNI and all DST equipment; - To calculate differential pressure drawdown; - To write well intervention reports; - To maintain high QHSSE standards in the Workshops and at the field operations;- To calculate of pressure Nitrigen for chambers charging. o Bottom hole memory gauges (Spartek, Metrolog, Amerada) programming, o Surface Well test equipment (Halliburton, Schlumberger):- Work on Heater, Three-phase Separator, Transfer Pump, Measure Tank etc.;- Level trol calibration; - Barton differential and static calibration & troubleshooting; - Gauge (Rosemount, Metran) DWT calibration; - Repair and opening of engines, compressors, pumps;- Calibration & troubleshooting: Pneumatic control, regulators(Fisher), liquid level controllers, Safety relif Valves, ; ESP Pilot (Axelson) etc.; - Work on Choke manifold (15kpsi) and Surface safety valve (15Kpsi);- Work on Flow head with Coflexip (15 Kpsi) (for DST purpose);- Take flow readings (creating data sheets);- Performing & supervising pressure tests on all surface test equipment; - Prepare and input Pipe and Instrument Diagrams, Process Flow Diagrams etc.;- Maintain and redress all surface test equipment;- Measured flow rates of oil, gas and water (Daniel Gas Flowmeter, Nuflo, Prowirl, Promass); - Performed Emergency Shutdown System;- Perform ignition system for Burner use; - Equipment Calibration, Lab & field lab analysis Equipment;o Surface Data Acquisition Systems (Scan, Fardux, Master Scada):- To program, disassembly, assembly and test of Surface Data Acquisition;- To read and interpret P\T plot in real time.o Sampling:- Take surface samples of gas and oil from Separator;o Preparing and execution programs for well kill operations; o Preparing final well test reports. Свернуть Kara Sea - Supervising of Gazflot well testing crew on a marine jack-up rig «Amazone» and floating drilling rig «Obskiy-1» in Yamal region, Kara Sea (Kharasavey field #1, Antipayuta field #21, Semakovskaya #103 - #105, Semakovskaya #100 ). The job included preparing DST well tests procedure and string diagram, organized of well testing crew for DST tools and surface equipment maintenance and preparing for job. Control for programming and RIH of memory gauges (Metrolog) was done. Also it involved correlating guns for perforation and data acquisition and processing for writing of final well test report. I also prepared programmes for well kill procedures and controlled for execution of that programmes. Sea of Okhotsk (Sakhalin) - I was working on semisubmersible platform “Songa Mercur” in Okhotsk Sea, Sakhalin on 3 DST well test (Yuzhno-Kirinskaya #1) – Sakhalin-3 project. The job also included preparing of DST tools (Halliburton) for 3 x DST’s runs, rig up and preparing for job surface well test equipment (Power Well Services), programming and RIH of memory gauges (Spartek Systems Sapphire), working with Data Acquisition System (Fardux). As I did several other services, such as correlating guns for perforation and surface sampling. Further, I prepared 3 DST well tests programmes and procedures, layout of surface equipment, string diagrams and data acquisition for 3 final well test reports. Also I prepared programmes for well kill procedures and execute of that programmes. Siberia - I controlled and supervised of Gazflot well testing crew at onshore rig (Medvezhye #62, Tazovskaya #83) in Yamal region. The job included DST tools and surface equipment maintenance, preparing and working during well test. Also it included correlating guns for perforation, surface sampling and data acquisition for writing of well test complete reports. Several times I did level decrease in the well by nitrogen compressor. I also executed of well kill program. Свернуть

  • Well Test Supervisor

    Apr 2006 - May 2014

  • Well Test Supervisor

    Apr 2006 - Jul 2013
• 

  Walltor

  Jan 2013 - Oct 2013

  Well Test Senior Operator/Well Test Supervisor

  I was working as the Well Test Senior Operator for 6 formation test. The job included preparing of DST tools (Halliburton) for 6 x DST’s runs, rig up and preparing for job surface well test equipment (Fluid Control Europe), programming and RIH of memory gauges (Metrolog), working with Data Acquisition System (Fardux).Last 2 formation test I was working as the Well Test Supervisior. I organized and supervized of well testing crew for DST tools and surface equipment maintenance and preparing for job. Свернуть

• 

  Trident Yug

  Aug 2013 - Jan 2013

  Well Test Senior Operator

  The job included preparing of DST tools (Halliburton) for 2 x DST’s runs, rig up and preparing for job surface well test equipment (Fluid Control Europe), programming and RIH of memory gauges (Metrolog), working with Data Acquisition System (Fardux).

• 

  Wellservice

  Jan 2014 - Oct 2014

  Well Test Supervisor

  I'd controlled and supervised of Wellservice crew for the execution of works on completion of The Well #P6 (Kirinskoe gas-condensate field). The Job included demothball, preporation and operate the surface test equipment during completion job. After job I generated well test report.

• 

  Schlumberger

  Apr 2014 - May 2014

  Well Test Chief Operator/ Well Test Supervisor

  I controlled and supervised of Schlumberger's well testing night crew on land well Dunga, Kazakhstan.The Job included next operations:Work with full package Surface Test equipment (SSV, Choke manifold 3 1/16”, Heat Exchanger, Separator, Low Gas Meter System, Surge Tank, Flare Stack) during Welltesting;Rig down of surface Well Test equipment previous Test Job (Set);Rig up and preparing for job surface well test equipment (equipment laying, pressure tests, instal gauges, etc.)

• 

  Wellservice

  May 2014 - Jun 2014

  Supervisor

  I controlled and supervised of Wellservice Crew involved to starting-up and adjustment works of the DPIR Surface Well Test equipment (Choke manifold, Heat Exchanger, Separator, Callibration Tank, Transfer pump, Boom&Burner, ESD) on the Jack up "Arcticheskaya".

• 

  Weatherford Kazakhstan LLP

  Mar 2015 - Jul 2017

  Well Test Supervisor

  I had work with Weatherford Well Test team. We are doing clean up&welltesting on the Karachaganak Gas-condensate field for Karachaganak Petroleum Operation (KPO b.v). H2S 4%. WellTest crew(more then 10 men) management during welltesting, maintenance&prepare equipment on the Base (20 men). The job included surface equipment maintenance, preparing and working during well testing.

• 

  GNS LLC in association with Air Drilling Associates Inc.

  Jan 2017 - Jan 2022

  MPD/UBD/Well Test Supervisor

  MPD/UBD and Well Test Supervisor. Attended project related meeting with client to address day to day operations for international crew. Reported all operation process details to project manager and client representative. Identified problems in operations process and resolved them in timely manner. Responsible for all MPD operations at rig site from technical, operations, and safety standpoint. Oversaw and guaranteed safety standards according to QHSE and enforce all applicable HSE policies.

• 

  Zhambyl Petroleum LLP

  Aug 2018 - Oct 2018

  Well Test Engineer

  I had short contract during as Well Test engineer. I worked with Zhambyl Petroleum at the submersible rig “Caspian Explorer”. I controlled the quality & safety of work and the data obtained during Well Test operation on #ZT-2 done by Schlumberger. We tested 2 formations. We used submersible pump (artificial lift service) due to grude oil, DST and standard Surface equipment.

• 

  Rosneft

  May 2021 - Oct 2021

  Wellsite Supervisor

  Madachagskaya-2, offshore part of Pesyakov Island, Nenets Okrug, Russia. Short contract. Full package: TCP, DST, SWT.Attended project related meeting with client to address day to day operations for Welltesting crew. Reported all operation process details to client office. Identified problems in operations process and resolved them in timely manner. Responsible for all operations at rig site from technical, operations, and safety standpoint during job. Oversaw and guaranteed safety standards according to QHSE and enforce all applicable HSE policies.- HAZOP/HAZID - Coordination of Service Providers (acidizing, N2 compression, wireline, DST,TCP, SWT)- Ensure equipment readiness- Input into welltesting programmes and work instructions- Execution of SWT, TCP & DST programs.I've been awarded "for ensuring HSE requirements during welltest operation", I've recieved a favourable report on my work during this project as well. Свернуть

• 

  НТЦ Геомеханика

  Jan 2022 - now

  DST (Halliburton design) Supervisor