Carlos Enterría Parrondo

Experience

• 

  Airbus Group

  Mar 2014 - Jun 2014

  Final Degree Project Intership

  Implantation of the GapGun in the factory (part of DIANNA project).

• 

  Mave Aeronáutica S.L.

  Nov 2014 - Feb 2017

  - Quality coordinator for the A400M aircraft in Flight Line and Delivery Center in San Pablo Factory (Seville).- Lead and coordinate the Inspectors Team of the Industrial Flight Line & Delivery. Coordinate with production the daily tasks.- Follow up of the Technical Log Book (TLB), perform the quality tasks and attest the TLB. Inform a review the points with the Flight Test Team.- Assure the health & safety work conditions.- Analysis and non-conformances.- Assure and manage execution of maintenance tasks coming from Aircrafts Limitations (ACL).- Assure completeness of the manufacturing dossier.- Assure the process and the execution of all functional testing of the full aircraft.- Concession study.- Contribute to the Quality network performance and to the management of the interfaces with the functional and operational Quality teams.- Coordinate with Industrial partners and MAP.- Coordination with the Delivery Process Quality Manager. - Corrective action implementations follow up.- Define and review further inspections points and review with engineering.- Ensure outstanding work accomplishment and documentation according to Airbus procedures.- Follow up of open non conformities until hand over to Delivery Process or to customer.- HNC’s, Scraps ang Reworks.- Manage the day-to-day manufacturing quality organization to ensure that all necessary manufacturing data are available and used.- Perform and coordinate the Customer Inspection Guide in the Delivery Process.- Planning control- Problems and discrepancies technical and documental analysis and making decision about the right solution.- Support internal and external audits and customer or DGAM visits according to FAL Quality Plan.- Work under a LEAN methodology and Quality Excellence.- Support continuous development and implementation of a systematic quality improvement for programme products and processes.- Quality activities reporting. Show less - Quality inspector for the A400M aircraft in Flight Line and Delivery Center in San Pablo Factory (Seville).- Open quality notifications. - Search and document management, interpretation of plans, complex measurements defects or facilities (GAP & STEP, cracks, dents, etc.).- Pre-flight and Post-flight mechanical and operational inspection. - Troubleshooting, functional testing, testing equipment, management of critical issues in collaboration with the design office or engineering processes.- Execution of scheduled maintenance, verification of all tasks performed by the production department, verification of all tasks related to sealing, painting and cleaning the plane.- Reporting of defects or nonconformity.- Pre-intervention client or the aeronautical authorities inspections, technical support to customers inspection, support operations crew and support DGAM inspection.- Perform the zone closure (ZC) and follow of the actions coming from the ZC inspection and during partners troubleshooting.- Participate in the CIG update.- Perform the inspections and the attestations of the Flight Line: before and after flight inspections, functional testing execution and perform trouble shooting from the non conformities detected.- Work according Quality Standards and Quality Manual. Show less

  • Quality Engineer

    Jun 2015 - Feb 2017

  • Quality Inspector

    Nov 2014 - Jun 2015
• 

  Altran

  Feb 2017 - Sept 2019

  - Quality coordinator for Retrofit A400M in San Pablo Factory (Maintenance Organization PERAM145). - Aircraft reception, performing Handover Report for transfer of custody. - Check Customer Documentations. - Creation of statistical indicators of reference (KPI) for aircraft and team performance. - Perform report for aircraft component due to cannibalization. - Support DGAM, reports and inspections.- Analysis of Airworthiness Directives using ADCL Tools. - Support and control of maintenance task. - Control and inspection Tooling (PaP), visual inspection and SAP stamp. - Check and control Aircraft Configuration according to Aircraft Maintenance Manual (Airnav) Services Bulletin (SB) and Alert Operator Transmissions (AOT) configuration. - Check and control of defects found on Aircraft. - Check and control of EASA Form 1 and Certificate of Conformance. - Support and drafting of new regulations. - Support for documentation of weighing aircraft. - Support for launch of Release to Service, Certificate of Acceptance and Customer Satisfaction Survey. (ADA support) - Check work order, process stamp, editable and additional documentation. Show less Product Conformity for C295 Program: - Prevention and management of quality non-conformities in production. - Creation and revision of technical inspection tests (ATP). - Quality support for equipment logistics. - Documentary quality. - Interpretation of drawings. - Airbus’ Software: SAP, SIPLA, SPRINT. - Analysis of repetitive failures. Quality of suppliers for C295 Program: - Requirement and follow up of corrective actions, analysis of their validity and efficiency. - Creation of statistical indicators of reference (KPI) for suppliers and equipment. - Review of delivery notes, Certificates of Conformity. Show less - Quality Engineer in Embraer's 175-E2 and 190-E2 Parts Industrialization Program. - Coordination with Quality department of Embraer in Brazil. - Coordination and performing deliverables of the industrialization process: Lay-Out, Diagram Flow Process, Process Failure Mode Effects Analysis (PFMEA), Control Plan, First Article Inspection (FAI), Measurement System Analysis (MSA), Visual Aspect Report, Dimensional Test, standards with the special process department. - Coordinate with heads of program. - Follow up machining processes and visual inspections. - Follow-up of the non-conformities of the part. - Review of the Technical Sheets of Manufacture with Engineering Department. - Approval of manufacturing orders. Show less

  • Quality Assurance Engineer

    May 2018 - Sept 2019

  • Quality Assurance Engineer

    Jul 2017 - May 2018

  • Quality Assurance Engineer

    Feb 2017 - Jun 2017
• 

  Airbus

  Oct 2019 - now

  Quality Aircraft Manager

  - Quality focal point for A400M Customer and Authorities during Retrofit Event, Non Installed CIs deliveries to Customer and during the ADA phase (PERAM 145 activities on serial aircraft from ToT to Ferry flight) and aircraft in the Multi-functional team.- Ensure delivery on quality, on time and on cost of Retrofit A400M- Coordinate in terms of lead time, manpower resources and cost activities that is responsible for: aircraft retrofit, maintenance, scheduled inspections, modifications, repairs from reception to delivery to end customer- Operational coordination of the Quality team assuring availability and balancing of resources within the areas of the organization- Interface with customer.- Develop and maintain a cohesive and engaged Team, taking care of each individual development. Manage team and training absenteeism- Ensure deployment of quality requirement defined by QMS and Quality Plan- Lead quality improvement to reduce Cost of Non Quality. Investigates NC, proposes containment action, searches root causes, proposes corrective and preventive actions and improvements, participating of rules improvement and cost of non-quality reduction.- Lead the Quality team in order to secure all defined quality inspections are correctly performed for all industrial operations during product manufacturing, assembly, integration, software upload, maintenance, repair and overhaul up to product delivery- Manage aircraft documentation ensuring on quality and on time to support industrial process and information to be presented to the customer.- Surveillance of TLB- Ensure that the industrial environment, facilities, hardware and jigs & tools respond to the operations & safety requirements, including FOD and damages prevention- Define and review further inspections points and review with engineering.- Work with the QCM to lead the Practical Problem Solving (PPS) to contribute to the root cause analysis and repetitive problems eradication. Show less