Beverly Escandor

Experience

• 

  Transworld

  Jan 2004 - Apr 2004

  On the Job Trainee

  Laboratory Analyst - assisted in the wastewater and water treatment analysis by using rapid tests: alkalinity, conductivity, pH, total hardness, chloride, silica, phosphate and iron, calibrating laboratory equipments such as pH meter.

• 

  Trading Co., Inc.

  Oct 2004 - Jan 2005

  Waste Water Analyst (On the Job Trainee)

  • Assisted in the wastewater and water treatment analysis by using rapid tests: alkalinity, conductivity, pH, total hardness, chloride, silica, phosphate and iron.• Calibrating laboratory equipments such as pH meter.• Assigned in different company: HITACHI, NIPPON SHEET GLASS / HOYA Glass Disk Philippines, Inc. and TOSHIBA Information Equipment (Phils.), Inc

• 

  SunPower Philippines Manufacturing Limited

  Jul 2006 - Jan 2017

  Perform the role and responsibilities of the laboratory technician.Strictly ensure that the SOPs, quality and safety are being performed inside the laboratory area.Setting up quality performance of the tools and method to ensure the readiness of the lab equipments for testing at all time, which include weekly maintenance, troubleshooting, optimization and calibration.Administer and coordinate the non-testing activities for example, chemical management, ISO documentation and procurement of lab spare parts and supplies.Ensure MSDS in the lab is updated and well maintained.Ensure that the safety risk assessment are updated.Support and assists the lab supervisor/process engineer in reviewing and editing laboratory documents which include lab tools/equipments/process’ operational procedures, specifications, control charts, standard work and troubleshooting guides.Maintain the inventory of the reference standards, chemicals and spare parts.Assist Engineers & participate in the qualification/evaluation, process improvement projects or new processes and new equipment qualifications. Assist in quality and lab safety non-conformance investigation; identify root cause and implement appropriate corrective and preventive action.Trained the new laboratory technician for SOP’s, operational procedure.and minor troubleshooting & optimization.Shift Leader within the shift. Show less Performs metals analysis using PerkinElmer ICP-MS Elan DRC II, PerkinElmer ICP-MS NexION 300S, Varian 725 ICP-OES.Performs daily chemical analysis (using Metrohm Auto-titrator) of Plating baths andEtchback module chemistries.Performs TOC analysis using the Shimadzu TOC-VWP analyzer.Monitors Cu plating bath additives thru CVS analysis.Monitors Sn plating bath additives using CVS and PerkinElmer Lambda 35 UV-Vis.Ensure the readiness of all lab instruments for testing at all times, which include performing internal calibration, daily performance check and QC check.Record all the QC check in Statistical Process Control(SPC) Chart Graphic Unit Interface (GUI) to monitor the performance of the tool.Ensure to feedback all the analysis results within period of time and also by providing needed replenishments based on both quantitative and qualitative analysis results.Certified in handling concentrated and ultra high pure chemicals such as HF, HCl, HNO3, H2O2, H3PO4, Iso-amyl alcohol, Ensure to prepare chemical reagents and standards after every shift.Assists Process engineers and R&D for any particular objective and evaluations.Perform shift duties (12-hours shift, day/night rotation) to support laboratory operations.Coordinate with Process Engineer, Equipment Engineer/Technician, Lead/Operation Technician to ensure that work is carried out according to SOP to meet process objectives.Arrange the collection of lab waste and perform tracking for lab waste collectedComply to environmental health safety and security (EHSS), quality policies, procedures and guidelines.Maintain and broaden own skills or technical expertise through training, seminars and etc. to support required activity.Ensured that all laboratory equipment is cleaned and washed by DI and acid (5% HNO3) at the end of each shift.Perform regular housekeeping and 6S in laboratory area. Show less • Operates the RENA N+ Oxide Horizontal Etch tool that performs the process of N+ etching, ink stripping and critical cleaning of silicon wafer.• Certified in operating SIERRATHERM Machine that performs the process of atmospheric chemical vapor in boron and phosphorus deposition of silicon wafers.• Certified in operating ASTEC Machine that performs the process of random textures in device side of silicon wafers.• Monitors the Horizontal Etch critical nodes: BRR, Delta Thickness, KOH and HF concentrations.• Ensures good quality output based on defined parameters and by strict queue time compliance.• Optimized the productivity of the N+ Oxide Horizontal Etch tool based on the UPH.• Records downtimes and responds to it by doing analysis and investigation using Out of Control Action Plan (OCAP).• Performs qualification runs for severe cases of tool downtimes and production run of quality wafers.• Process monitoring and perform minor troubleshooting and problem analyzing.• Establish and initiate ideas to continuously improve on the process.• Assists Manufacturing Supervisors and Process engineers for any particular objective.• Support PE/EE in other activities related to process improvement.• Proper endorsement every shift transition.• Check lot integrity, verify actual counts against overall WIP count and ensure no discrepancy.• Take lead role in improvement programs like SPC and 6S.• SPC chart update and perform GUI.• SPC Trainings Show less

  • QA Senior Laboratory Technician

    May 2012 - Jan 2017

  • Laboratory Technician

    May 2011 - Apr 2012

  • Senior Lead Technician/Manufacturing Technician

    Jul 2006 - Apr 2011
• 

  Illumina

  May 2017 - now

  • Quality review and release of Manufacturing DHRs for Reagents and Consumables.• Ensure lots meet QC functional test requirements and acceptance criteria; review data provided by QC or R&D, as applicable, prior to product release.• Release approved lots to inventory via materials resource tool (SAP).• Facilitate initiation, review and closure of nonconformance records (NCRs) associated with production lots, including evaluation and disposition activities as needed.• Verify Process Deviations referenced in manufacturing batch records.• Coordinate with Planning to ensure timely release, consistent with Packaging/Shipping schedules. • Provide Good Documentation and Batch Record Review training and guidance to Manufacturing personnel and new hires, consistent with the approved work instructions.• Ensure standard Manufacturing and Quality practices and procedures are followed.• Update and revise procedures / work instructions as required.• Assist Quality Engineering with NCR investigation / implementation as required.• Project manage Quality improvement projects. Show less • Assist Process and Product Engineers in providing direct support to troubleshooting, sustaining and continuous improvement for consumables production lines related to yield, quality and throughput.• Perform daily inspection or failure analysis on incoming materials, in-process production and finished products.• Assist with design and execution of controlled experiments and evaluations to optimize processes; document and analyze process test results such as protocol, IOQ and work instructions.• Assist in SAP/MES/CAMSTAR/LIMS ticket and process verification as stated in the work book.• Recommend and help implement improvements in a production environment to meet production goals across multiple operations and technologies.• Coordinate equipment and process validation execution, data collection and summaries.• Work with Engineering, Manufacturing and Quality teams to develop processes for new products and improve processes of existing products. • Able to do some machine calibration and preventive maintenance. • Help define technical requirements and write procedures for Production to process product. Show less Assist Process and Product Engineers in providing direct support to troubleshooting, sustaining and continuous improvement for consumables production lines related to yield, quality and throughput.Assist with design and execution of controlled experiments to optimize processes; document and analyze process test results.Assist in MES ticket and process verification as stated in the work bookRecommend and help implement improvements in a production environment to meet production goals across multiple operations and technologies.Coordinate equipment and process validation execution, data collection and summaries.Work with Engineering, Manufacturing and Quality teams to develop processes for new products and improve processes of existing products.Help define technical requirements and write procedures for Production to process product. Show less

  • Quality Technician

    Oct 2019 - now

  • Product Life Cycle Technician

    Apr 2019 - Oct 2019

  • Manufacturing Process Technician

    May 2017 - Mar 2019