Abdul Salam

Experience

• 

  Aman tech

  Dec 2010 - Oct 2011

  Trainee inspector
• 

  Siemens Energy

  Nov 2011 - Jan 2013

  Mechanical Supervisor
• 

  Unger Steel Middle East

  Oct 2014 - Oct 2016

  Construction Supervisor
• 

  TUV Austria Asia

  Jan 2017 - Jun 2017

  QA/QC Mechanical/Welding Inspector

  Project: LPG Gas & Amine Gas PipelinePROJECT: ON Naimat LPG Gas & Amine Gas Pipeline Tando adam Sindh province.APPLICABLE SPECIFICATIONS & CODE: ASME B31.8, API1104, AWS Spec A5.1, AWS A5.18, PQR, WPS & PROJECT DRAWINGS & SPECIFICATIONS.PROCUREMENT, CLIENT & OWNER: United Energy Pakistan limited.CONTRACTOR: China Petroleum Technology & development corporation (CPTDC).SUB-CONTRACTOR: Zealcon Engineering & Descon EngineeringNDT (RT, UT) SUB-CONTRACTOR: SGS Pakistan.Responsibilities:• Welding Inspection {Dimensional & Visual Inspection (Fit-up, During Welding & Post Welding)} in Fabrication, welding yard (Workshop) and site joints.• Reviewed Mechanical Test Certificates, Calibration Certificate of Welding, witnessed & reviewed Validation Certificates of Welding Generators & reviewed Certificates of Conformance of “ESAB” Welding ElectrodesE7018 and filler wires of GTAW SFA#5.18 ER70S-3. • Witnessed Welder Qualification Tests (WQT), of Welders as per client approved WPS, PQR & ASME Section IX. Viewed RT films & reviewed reports. Reviewed & signed approved Welders Register & Welder Qualification Cards.• Reviewed & approved contractor’s Inspection & Test Plan (ITP), special processes procedures - Welding, NDT (DPT & RT), Daily inspection reports for covering quality control activities for various processes.• Witnessed PWHT graph welding summary report, record weld map and NDT reports).• Holiday Detection Inspection, Tie-In joints Inspection, Witness of Hydrostatic Testing Inspection (90psi to 2850psi) and Pneumatic Testing, Preparation of inspection reports, Test Packs & punch list, Prepare welding inspection summary report, Responsible for overall quality control inspection aspects of Pipes of loading & loading at yard, grinding bevels for removal of rust, power brushing from inside & outside on edges of Pipes.• NDT (VT, DPT, UT and RT), Repair Welding Inspection, Re-welding Inspection, Tie-Ins Welding joints Inspection, Field Joint Fit Up. Show less

• 

  SEPCO ARABIA CO

  Aug 2017 - Apr 2018

  Quality Assurance Quality Control Inspector
• 

  Hyundai Engineering & Construction Co.,Ltd.

  May 2018 - Nov 2018

  Quality Assurance Quality Control Inspector
• 

  JGC Gulf International Co. Ltd.,

  Jan 2019 - Apr 2019

  Lead QA/QC Inspector Mechanical

  o Weekly data base reporting as per SAEP-1160a) Production weld statusb) Welder and project repair rateC) Welder’s repair assessment and tracer welds.o Review applicable documents, Interpretation of client drawings / requirements and having discussion about the quality control plan, stages of inspection with production and establish hold points.o Conversant with welding processes (SMAW, GMAW, FCAW and GTAW). o Making the inspection, testing plan and weld maps.o Inspection of welding repairs made correctly & evaluates the test result and reports.o Verifying the record for testing and inspection equipment.o Maintaining records i.e. test reports, WPS, PQR, WQT & WPQ record list, material test certificate and drawing.o As a QA/QC Inspector inspect all Mechanical and Welding activities in plants, shop fabrication and onshore pipelines.o Daily inspection and reporting of welding activities that only approved procedure, process, base metal, welder, electrode, filler wire, fluxes, gases and flow rate are used.o Monitoring and checking adequacy of joints preparation by verifying the joint dimension, fit-up, weld joint cleanliness, quality of individual process, placement and sequence of individual weld passes, inter-pass cleaning, inter-pass temperature and time intervals in weld cycle.o Surveillance that welding parameter such as amperage, voltage, polarity, welding technique in compliance with approved procedure.o Monitoring the welding consumables during the storage as well as uses.o Finished weld appearance, weld size, weld length, dimensional accuracy of weldment. NDE if required, PWHT if required and preparation of inspection reports.o Verifying the record of calibration certificates of welding equipments, consumable test certificate and holding oven.o Pneumatic testing of reinforcement pad, full thrust anchor, removable anchor, wears pad, etc. Show less

• 

  China National Chemical Engineering Company Pvt. Ltd.

  Apr 2019 - Nov 2021

  QA/QC Project Supervisor

  o Conversant with ASME-SEC II PART A, B, C, SEC.V, SEC. IX, AWS D1.1, B31.3, B31.4, B31.8, SAES, SATIP, SAIC, API-620, API-650.o Responsible for directing and supervising a group of employees.o Supervise the Construction Quality Control functions/activities related to welding discipline, including Quality Control inspection schedules and the collection of Quality Records. Ensure the availability of quality record documents.o Supervise and witness inspections, check reports and documentation issued by inspectors and collect the required Quality Records.o Conduct meetings regularly with inspection team to help consistency in teamwork.o Allocate Quality Control personnel for welding works to the various areas of site activity.o Analyze facts or circumstances surrounding individual problems to determine what action should be taken within the limits of standard practices.o Responsible for compilation and maintenance of inspection reports and records.o Maintain discipline, morale and harmonious relations among subordinates.o Ensure that material and equipment are correctly received, stored, preserved and handled, identified and traceable.o Ensure that the tests, controls and inspections are carried out according to Quality Control Plans/Inspection Test Plans, obtain and collect the relevant documentation also ensure that personnel have access to all required project documentation.o Ensure the preparation of the weld summary along all required NDT reports smoothly handover to the mechanical team before spools release and hydro test.o Monitoring the capability of each welder based on RTFI reports.o Maintain welder’s status log-book.o NDT co-ordination with third party inspection in PT, MT, RT, VT, PMI.o Review of local vender’s quality plans for piping fabrication and monitor sub-contractor activities.o Preparation of hydro test packages (Punch listing, weld summary, NDT reports, RTFI assessment reports, weld map, verification of red line drawings). Show less

• 

  Metscco Heavy Steel ind. co.

  Nov 2021 - May 2022

  QA/QC Supervisor
• 

  Al-Rushaid Construction Co. Ltd (ARCC)

  May 2022 - Jun 2024

  QA/QC Supervisor
• 

  Trevi Group

  Jun 2024 - now

  QA/QC Supervisor