Kenneth Davis

Experience

• 

  U.S. Navy

  May 1995 - May 2003

  10 years of direct supervision of 25 technicians and the coordination and support of shift rotation groups and team leaders. Responsible to achieve department metrics for safety, systems reliability and mission readiness in the day to day operation, maintenance, repair the Trident I and Trident II Strategic Weapons Systems and associated electronic, electrical, mechanical, hydraulic and pneumatic subsystems. Primary responsibility to provide mentoring, resources, tools, and direction needed for the technicians to be as effective and efficient as possible. Prior knowledge and experience advising high performance work groups and experience with implementation and monitoring of Statistical Process Control systems, ISO 9001 processes and an ability to jointly lead work groups. Demonstrated performance in the areas of leadership, change management and continuous improvement. Established a leadership role in safety through daily communication with technicians to ensure compliance with established safety and quality policies and procedures to achieve “Zero Defects” and Zero Harm.” Planned, directed and managed work activities of a work center, ensuring work activities were coordinated with supporting work centers. Identified and resolved technical problems, procedural issues or information gaps affecting maintenance and repair schedules and mission readiness. Evaluated technician performances and conducted performance reviews. Counseled and disciplined subordinates when necessary and made promotion and award recommendations. Consistent and dependable in carrying out supervisor duties independently and with the ability to perform at a modeling level for all functions of the supervisor. Show less Operated and maintained the Strategic Weapons launching systems including pneumatic, hydraulic, electrical, electronic systems and VME-based digital computers. Maintained operation of electrical distribution panels, switches, switchboards, controllers, voltage regulators, current transformers, rectifiers and voltage transformers within the fleet ballistic missile weapons systems. Tested and repaired missile inertial guidance and onboard electronics systems. Read and interpreted mechanical and electrical diagrams and schematics, drawings, performance and manufacturer specifications, operating manuals and familiar with the design and operating requirements of equipment including electronic and/or electro-mechanical control systems. Experienced in cycling operating systems to check mechanical portion of electronic and/or electro-mechanical systems and detect variations from specifications. Analyzed results of tests to locate and determine cause of malfunctions. Adjusted settings and calibrated electronic equipment (ie: transducers, flowmeters and controllers) to properly align pneumatic, hydraulic, cooling and mechanical systems. Skilled in replacing faulty components and conducting system retests. Analyzed equipment malfunctions to determine if failure was in control systems, or was of a mechanical nature. Utilized a variety of precision test tools and equipment to conducts operational tests. Show less

  • Maintenance Coordinator

    Feb 1992 - May 2003

  • Strategic Missile Division Leading Petty Officer/Work Center Supervisor

    Jan 1992 - May 2003

  • Quality Assurance Inspector

    Apr 1991 - May 2003

  • Controlled Materials Handler

    Apr 1991 - May 2003

  • Assistant Nuclear Safety Officer

    Jan 1991 - May 2003

  • Missile Technician 1st Class

    Feb 1988 - May 2003

  • Missile Technician 2nd Class

    May 1995 - May 1997
• 

  Holly Springs Police Department

  May 2003 - Oct 2004

  Police Officer

  Assigned to Patrol Division, Gang Officer

• 

  Vicksburg Police Department

  Oct 2004 - Feb 2007

  Police Officer II

  Assigned to Patrol Division,Patrol Supervisor January 2005 to February 2007Formally trained, qualified, and experienced Law Enforcement Instructor. Six years of experience as a Law Enforcement platform instructor and 15 years of experience as an influential field trainer in diverse settings. Experienced in public presentations, speeches, and classroom instruction. Department of Homeland Security Law Enforcement Protective Measures for CBRNE Incidents Instructor: Certified to conduct classroom instruction in terrorism, Chemical, Biological, Radiological, Nuclear, or Explosive (CBRNE) hazards, protective measures, appropriate response actions, and the Incident Command System (ICS). Bureau of Justice Assistance Gang Education and Training (G.R.E.A.T) Instructor: Certified to conduct Elementary and Middle School classroom instruction of the G.R.E.A.T. curriculum. G.R.E.A.T. Families Facilitator: Certified to develop, organize, and facilitate the G.R.E.A.T. Families program and to train and certify Co-facilitators. Field Training Officer: Certified in program development, mentoring, evaluating and supervising police trainees. Field Training Officer, Crisis Negotiatior, GREAT Instructor and DHS Law Enforcement CBRNE Protective Measures Instructor Show less

• 

  Raymore Police Department

  Feb 2007 - Oct 2011

  Police Officer III

  Assigned to Patrol Division, Crisis Intervention Team Officer, Neighborhood Watch CoordinatorDeveloped the following community policing programs, policies and operating procedures:Crisis Intervention Team policy and procedure.Volunteers in Police Service Program policy and procedureAlzheimer's Registry Program policy and procedure.

• 

  FedEx Express

  Sept 2011 - Sept 2013

  Courier

  DOT CertifiedTSA SIDA ClearanceUSPS Clearance

• 

  G4S Secure Solutions (USA) Inc.

  Dec 2011 - Feb 2013

  Bank Protection Officer

  Physical Security and protection of client financial institution property and personnel.

• 

  Halliburton

  Sept 2013 - Jul 2015

  Electronics Technician I- Cementing Technician

  Managed field support for hydraulic fracturing crews and other product service lines, including cement, acidizing, coil tubing and wirelines. Tuned and calibrated all equipment, conducting efficient troubleshooting procedures as needed on instrumentation, controlled data acquisition devices, and telecommunications equipment. Installed and maintained Holjeron CAN/SDS and I/O modules in conjunction with proprietary data acquisition and process control hardware and software platforms, along with interfaces with Caterpillar, Cummins, and MTU Detroit Diesel ECM J1939 Bus. Monitored various sensors, transmitters, and gauges, ensuring consistent accuracy to facilitate overarching operations safety. Show less

• 

  Liberty Oilfield Services

  Jul 2015 - Sept 2017

  Electronics Technician II

  Conducted field support procedures, including preventative maintenance, encompassing tuning, calibration, and troubleshooting of equipment failures, and troubleshooting on telecommunications devices. Successfully integrated National Instruments CompactRIO control systems and Allen-Bradley PLCs with LIME data acquisition and process control hardware and software platforms, as well as interfaces with Caterpillar and Cummins ECM J1939 bus. Ensured working order of MicroMotion coriolis mass flow meters and Brrokfield process viscosity meters, as well as Thermo Scientific pH meters, sensors and transmitters, as well as Gamma SGD-O specific density gauges, and Lincoln Orsco greasing systems. Show less

• 

  Keane Group

  Sept 2017 - Feb 2018

  Electronics Technician II

  Oversee and support operations for the hydraulic fracturing crews. Execute routine preventative maintenance procedures including tuning and calibration, troubleshooting of equipment failures on instrumentation, and telecommunication devices, obtaining controlled data for lessons learned. Configured and maintained SCADAPack and Siemens PLC control systems, integrating with AccuFrac data acquisition and process control hardware and software platforms and interfaces with Caterpillar, Cummins, and MTU ECM J1939 Bus. Maintained MicroMotion coriolis mass flow meters, Brookfield process viscosity meters, Thermo Scientific pH meters, sensors and transmitters, and Gamma SGD-O Specific density gauges, as well as Lincoln Orsco greasing systems to ensure optimized workflow and minimized downtime. Show less

• 

  Baker Hughes, a GE company

  Feb 2018 - Oct 2018

  Field Service Technician

  Rotational Field Service Technician responsible for the installation, maintenance and repair of wellhead components for drilling, hydraulic fracturing and production operations. Experienced in the installation, maintenance and repair of Wood Group valves. heads, spools and hangers. Install, operate and maintain sand traps, separators and manifolds for flowback completion well and fracking operations

• 

  Halliburton

  Nov 2018 - Jul 2020

  Electronic Technician
• 

  Draeger Medical Systems, Inc.

  Jul 2020 - now

  Technical Service Representative