Experience

• 

  Zte corporation

  Jun 2005 - Mar 2011

  Senior supervisor

  Job responsibilities include:• PTCL CDMA WLL (1X & EVDO) Project.• Installation & commissioning of EVDO BTS, IP BTS expansion of WLL• CDMA Project in ITR, RTR, FTR, MTR, STR & WTR regions.• Installation & commissioning of EVDO ZXC100 BTS and ZXC10 BTS AE.• Installation of Rectifiers ZXD1500 and Batteries 200Ah and 300 Ah for theBTS independently.• Installation & commissioning of outdoor BTS (CBTS01) For PTCL USFMansehra Project.• Installation of Rectifiers ZXDU58 B121 and Batteries HAZE 150Ah for theoutdoor BTS for PTCL USF Mansehra project independently.• Installation of Environment Alarm system (EAS) MISU i-e Temperature,humanity, infrared, smog, door and water sensors for ZXC10 BTS.• Installation of runways for the PCM cables, RF cables, power cables andBattery cables.• Installation of GPS Antenna and making the GPS connectors, RF jumpercable connectors, E1 connectors, RJ45 connectors & IF cable connectors.• Troubleshooting power work, VSWR checking (RSSI) at BTS ends• Troubleshooting and maintenance of Base transceiver station (BTS),Rectifier, Batteries, Air conditioners and Diesel generators.• Have good Knowledge & experience in Driver test, Site Master & ScannerMW Experience• Work experience of Installation and Configuration of “NEC” Microwave Links.(For Tele cord, PTCL (WLL) & Telenor).• Installation and commissioning of Microwave indoor and outdoor.• Coordination with Sub Contractor for installation of Microwave links.• Installed (PDH & SDH) Microwave Links. (PASOLINK. 4E1s, 16E1s, 40E1s,32E1s, 48E1s & 96E1s).• PAT for Tele cord, & PTCL (WLL) & Mansehra USF project sites.• Assembling, panning (Alignment) and Bracing of 0.3m, 0.6m, 0.9m, 1.2m,1.6m, 1.8m, 2.3m Dishes.• Proficient in using GPS, BERT Meter (Bit Error Rate Test), Mustimeter,Compass used in• Microwave Installation and General Navigation.• Good experience in All MW Indoor & outdoor sites survey in PTCL,Zong, Jazz & Telenor sites. Show less

• 

  China communications services

  Jun 2011 - Apr 2012

  Engineer

  ZTE SDR (ZXMG 8700, 8800, 8900) Project: ZTE-CMPAK Macro BTS Swap Project [Configuration, Commissioning and Trouble Shooting of SDR]Worked as Engineer in CCSI Central-1 region. My job responsibilities include:• The entire installation configuration, commissioning and testing of SDR and Power Equipment• Configuration & commissioning of MISU, GSUR, GSU for external alarms• Troubleshooting of EASS• Patching & configuration of phase 1 sites alarm• Perform E1 expansion as well as TRX expansion• Done BSC patching and through the media• Troubleshooting of SDR Equipment at different sites of CMPAK (Zong)• To maintain the Transmission Link including Microwave Links• Give Technical support to our teams regarding SDR installation, testing, commissioning and complete transmission• Make sure all PCM, TXN are right or not• To coordinate with BSC Engineer in order to check the status of sites• Coordinate with our internal Project Manager and External Project Manager, Co-ordination with Authorized people for preparing the Planning• Send the daily report to our Project Team. Show less

• 

  Acme technologies pakistan

  Apr 2012 - Sept 2012

  Engineer

  ZTE SDR (ZXMG 8700, 8800, 8900) Project: ZTE-CMPAK Macro BTS Swap Project [Configuration, Commissioning and Trouble Shooting of SDR]Worked as Engineer in ACME Central-1 region. My job responsibilities include:• The entire installation configuration, commissioning and testing of SDR and Power Equipment• Configuration & commissioning of MISU, GSUR, GSU for external alarms• Troubleshooting of EASS• Patching & configuration of phase 1 sites alarm• Perform E1 expansion as well as TRX expansion• Done BSC patching and through the media• Troubleshooting of SDR Equipment at different sites of CMPAK (Zong)• To maintain the Transmission Link including Microwave Links• Give Technical support to our teams regarding SDR installation, testing, commissioning and complete transmission• Make sure all PCM, TXN are right or not• To coordinate with BSC Engineer in order to check the status of sites• Coordinate with our internal Project Manager and External Project Manager, Co-ordination with Authorized people for preparing the Planning• Send the daily report to our Project Team. Show less

• 

  Zte corporation

  Sept 2012 - Dec 2021

  Worked as QHSE Manager in ZTE, Central & South regions Jazz Projects. • Ensure remote inspection of working at height & pre-climb checks in the region• Identifying and reporting on unsafe equipment, unsafe transportation (teams’ vehicles) working conditions and practices, follow-up with the concerned persons till closure• Identify and measure potential safety hazards in the workplace and define the accurate way to overcome the hazard associated with the activity to complete it within a safe manner• Ensure that PPE and vital OHS Tools & equipment is purchased, used, maintained, and inspected (External or internal)• Ensure all field resources/drivers' training course's status aligns with the training matrix for each project• Ensure approved safety procedures are followed and implemented on the field for Road Safety, Work at Height, Electrical Safety, Fire Safety, Crane Safety, etc.• Developing and implementing TBT as required to raise the resources of EHS cultures• Conduct internal awareness sessions, as required, with ZTE personnel & stakeholder’s, related to the project.• Conduct HSE orientation/training to all site personnel including subcontractors and visitors• Conduct weekly/Monthly vehicles full inspection and send the inspection report.• Conduct daily safety inspections in site activities and prepare each visit report along with the monthly accumulated report• Prepare, update, and submit daily HSE Dashboard and compliance reports• Supervise and report the status of corrective action or improvements on the audit findings• Act as a liaison officer in the submission of HSE regulatory reports• Review Risk Assessments, lifting operations, permit to work records and ensure the resources submit the needed documents and forms in a timely manner.• Investigating workplace and site accidents, Submitting weekly safety reports• Inspect the resources OHS tools and report any defected/missing items and follow-up till they align with the project tools Matrix. Show less Worked as QHSE Engineer QA/QC & HSE in ZTE, Central-1, Central-2 &North Regions. Job responsibilities include:• Looking after quality of TP Roll-Ex, TP 2G,3G,4G TP-Vega, TP-RMS , TPMS,TP Solar, CMPak, Mobilink 2G,3G-4G Phase 05 projects.. Evaluation of installation quality, including evaluation of TI installation, civilwork installations, sun-shades installations etc.• Quality Audit of PAT accepted sites• Quality Audits of site PMs and CMs• Assurance of TP and ZTE quality standards• Quality Audit Spot check of swapped/installed sites• Quality Control inspection of Power cables at Cable factories• Quality control inspection of Integrated Power System (IPS) at Saltec Powerlinks Pvt. Ltd• Quality control inspection of optical fiber cables at Cable factory• Quality audits of Solar and wind mill sites of Telenor Solar project• Prepared site Construction Guide Book for SDR Swap• Prepared design and construct model for installation of TI equipment insidebattery bank• Preparation of various quality audit reports, HSE audit reports, Engineeringquality checklists, Quality Improvement Notices etc.• Onsite and in office QA and HSE trainings of sub cons teams• Meetings and sessions with sub cons and customers• Conducting ATPS, PACS and FACs of sites with project team• HSSE audits of sub cons and suppliers as per OHSAS 18001:2007 standards• Health Safety and Security Environment (HSSE) inspections of sites duringinstallations• Investigation and reporting of onsite accidents/incidents• Installed SDR model sites in Karachi, Hyderabad-Sukkur & Islamabad test. Show less Worked as Ran Engineer ZTE Center-1 Region Job responsibilities include:• ZTE SDR (ZXMG 8700, 8800, 8900 Telenor Vega Project (MW & SDR swap)• Pre swap alarm testing & verification of Power one 16.48, Eltek FP2 2000, Huawei TP48200A rectifier from NOC• Equipment verification according to SMR• Modify DED according to swap feasibility • Make the template files of ZTE LMT software• Up gradation of ZTE software package files• Commissioning of BTS BS8700 RRU solution, BS8900/BS8800 RSU solution• Responsible of SDR & MW readiness before swap.• Configuration and troubleshooting of NEC iPaso 200, 400.1000• Enabling services NMS, VLAN, QOS, Bridge setting, Ethernet port setting, LAG setting, Clock, Service status settings, Ethernet port setting, BER setting.E2E media visibility testing.• E2E Media verification from site to BSC through Ping Tests.• Supervise sub con teams for NSN to ZTE soft & hard cutover• Make sure HSSE & PPE on site • Installation of Rectifier W301, ZTE battery bank • Installation of RRU (Single band sector R8882, dual band sector MBR R8882, single band sector R8860E, R8881.)• Rectification of service effecting alarms after on-air the swap site• Provide technical support to sub con engineers through remote and on-site troubleshooting for the smooth evolution of swap activity• Remove the KPI issues of swapped sites with the coordination of RF department• Soft and hard Expansion of SDR swapped sites• Responsible for QA/QC• Compile the document of site including dismantling BOQ, new BOQ, SDR ATP, and MW ATP.• Successful completion of PAT and Pre-PAT activities.• Trained the sub con engineers regarding software & hardware of ZTE & NSN equipment• Perform indoor & outdoor installation of ZTE sites• Check the VSWR, and Return losses of RSU solution sites.• Post swap alarm testing, verification & troubleshooting of both internal & external alarms of W301, Eltek FP2 2000, Huawei TP48200A rectifier from NOC Show less

  • QHSE Manager

    Apr 2016 - Dec 2021

  • QHSE Engineer

    Mar 2014 - Mar 2016

  • RAN Engineer

    Sept 2012 - Mar 2014
• 

  Iic technologies

  Jan 2022 - Jul 2022

  Assistant compliance officer

  • To ensure legal compliance in the facility. Reporting of non-compliance and taking follow-ups for corrective actions. • Ensure the first aid have been given to injured/ill person and handled carefully. • Ensure that Safety equipment are inspected, serviced, valid and functional. • Ensure that Schedule equipment maintenance is being followed and recorded. • Ensure that all Check sheets data has been filled. • Ensure that First Aid boxes are maintained. • Ensure that Safety Cabinet keys are available in Safety room. • Create CAP against internal & external audits NC’s. • Planning meetings and taking detailed minutes • Work on waste management system, provide trainings and bring improvement the system Show less

• 

  Sct

  Aug 2022 - Dec 2022

  Hse auditor

  •Oversee and audit sub-contractor compliance with Nokia internal health and safety standards and requirements.•Perform worksite audits, inspections and evaluations on subcontractor’s performance, and visiting job sites where internal or external employees are working on high-risk work.•Fall Protection Equipment (FPE) inspections to make sure they comply with Nokia’s required standards•Assisting in subcontractor’s maturity assessments in terms of H&S•Host H&S meetings with subcontractors•Establish, coordinate, and deliver H&S trainings/Workshops•Deliver onsite H&S awareness session and toolbox talk•Conduct onsite risk assessment•Attend H&S meetings with the customer•Record subcontractor’s non-compliance and tracking the corrective action•Keeping record of trainings, subcontractor’s team & PPE details•Maintain a comprehensive fleet tracker to ensure road safety compliance•Producing periodic H&S reports Show less

• 

  Golden link associates

  Jan 2023 - now

  Manager sale & marketing