Misbahur Rahman

Experience

• 

  General Enterprises

  Jun 2011 - May 2012

  Piping Supervisor

  • Piping Erection, Welding, Complete assembly of all the lines, Release for RMC, Performing hydrotest, Reinstatment of lines, Approval by QC and Client’s Piping Inspector and Releasing for Precommissioning. •Daily participation to the meetings of the Production Department in order to establish the priority operations.• Daily organization of the safety toolbox.• Demanding workers to provide a good quality work and checking that all workers have the complete safety work equipment.•Generating documents such as General arrangement drawings, Equipment layout, Nozzle orientation sheets for the different mechanical equipments, Piping Layouts, isometrics, special support sketches, etc.•Inspection of the piping system by studying the GA drawings, P&ID, Isometric drawings & support details. • Selection and issue of require materials as per the Drawing and codes. • Manpower planning as per schedule, Progress reporting, Co-ordination with other departments in-house, with the Client & Vendors.• Acting as a Checker for the technical deliverables for a project .Ultimately being responsible for smooth & timely executing the project with high level technical accuracy meeting with clients expectations. • To co-ordinate with client, consultant, sub-contractors, design and engineering department regarding the technical problems. • Reviewing of the pipe line routing, supporting and civil structure by using AutoCAD.• Planning and facilitating maintenance activities.• Supervise the work and give necessary clarifications to sub-contractors as required. • Make day-to-day planning and monitor the progress at site. • Inspection of structural fabrication & erection, correctness of pipe supports & location. Show less

• 

  Vishal Engineering & Construction Private Limited

  Jun 2012 - Jan 2015

  Piping Supervisor

  Inspection of the piping system by studying the GA drawings, P&ID, Isometric drawings & support details.Responsible for daily monitoring and inspection of contractor's pipe fabrication and erection.Selection and issue of require materials as per the Drawing and codes.Manpower planning as per schedule, Progress reporting, Co-ordination with other departments in-house, with the Client & Vendors.Preparation of daily wise report and meeting with the management for the completion of the work.Raw Material inspection & follow up drawings as per structural codes & standards.Expertise in work method of statement, P&ID, pipe plan, Iso, pipe support and structure drawing. Accountable for fulfilling production, planning, supervising labor workforce, tools, providing technical help to complete the work scope according to the need.To make Cutting Plan of the raw material to minimise the Scrap.To maintain the Records of the Job/Drawing in Progress.Fabrication, Assembly, erection and alignment of the Steel Structure, Piping, Equipment & NDT Clearance of the same as per Project Specification Codes. Show less

• 

  Aarvi Encon Pvt. Ltd.

  Apr 2015 - Oct 2015

  Mechanical Maintenance Engineer

  • Inspection & Maintenance of Drums/Vessels & Exchangers.• Supervise the work and give necessary clarifications to sub-contractors as required. • Make day-to-day planning and monitor the progress at site.• Carry out inspections related to pressure test activities as per test package and P&ID.• Attend Daily meetings with the discipline engineers and construction people to resolve any outstanding issues and take corrective action wherever required.• Making Proper ventilation near the entry & exit areas at the closed confined areas in vessels.• Cleaning of drums/vessel, Heat Exchanger. Removal of demister pad, Adsorbent, Tubes, Filter & cleaning or replacement as per job scope.• Bolt Servicing, Blinding & Deblinding, Air Ejector Installation, • Insulation removal at damage areas. • Proper lightening arrangements for inspection.• Proper cleaning of all weld joints & nozzle connections for inspection.• Necessary scaffolding at the required locations, order for weld build up repairs, in-situ machining.• DP check, nozzle replacement, patches repair (Inlay & Overlay), Pneumatic & Hydraulic check as per job scope.• Removal of Gauge glass & stand pipe for service & testing.• After all inspection DPT, PAD, UT & repairs, Hydro test or Pneumatic to be carried out as per job scope Show less

• 

  GS E&C

  Nov 2015 - Sept 2016

  Piping Pre-Commissioning Engineer

  • Follow up the preparation of precommissioning / commissioning piping procedures (drying-out, inerting, leak test packs, chemical loading etc.) • Supervise the Witnessing of contractor pre-commissioning activities by CTR team of technicians, as defined by the Leader (hydrotesting, flushing, cleaning, GALT etc.) • Promote / ensure safety within the commissioning activities and verify that safety procedures and permit to work system. Prepare the test packages prior to pressure test.•Plan & execute pressure test (Hydro/pneumatic and commodity test) according to piping class, their test limit and required pressure.• Working together with Hydro test team & conducted Hydro test, Pneumatic/Leak test.• Coordinating with subcontractors on clearing the punch items.• Erection and commissioning of Pipe.• Work allocation to subordinates and guidance.• Supervise and carry out effective implementation of weekly/monthly production schedule to meet the targets.• Preparation and submission of weekly monthly reports.• Progress planning and monitoring.• Assists manager-engineering departments in all technical affairs.• Assisted by a team of supervisors and technicians.• Preparation Of Pre- Commissioning Packages (Air Blowing, Water Flushing, Leak Test).• Preparation of pre- Commissioning Activities likes Card Board Blasting, Chemical cleaning, Oil flushing, Steam Blowing.• PIG launching and Receiving.• P&ID Checking and Marking. Line tracing make sure as per P&ID.• Line flushing, Vessel cleaning.• Air blowing, Steam blowing, water flushing, leak Test and Purging.• Following all kind of Work Permit Systems , Strictly and Carefully• Making of punch lists and rectification of the points in coordination with maintenance. Show less

• 

  Aarvi Encon Pvt. Ltd.

  Jan 2017 - Sept 2017

  • Inspection & Maintenance of Drums/Vessels & Exchangers.• Supervise the work and give necessary clarifications to sub-contractors as required. • Make day-to-day planning and monitor the progress at site.• Carry out inspections related to pressure test activities as per test package and P&ID.• Attend Daily meetings with the discipline engineers and construction people to resolve any outstanding issues and take corrective action wherever required.• Making Proper ventilation near the entry & exit areas at the closed confined areas in vessels.• Cleaning of drums/vessel, Heat Exchanger. Removal of demister pad, Adsorbent, Tubes, Filter & cleaning or replacement as per job scope.• Bolt Servicing, Blinding & Deblinding, Air Ejector Installation, • Insulation removal at damage areas. • Proper lightening arrangements for inspection.• DP check, nozzle replacement, patches repair (Inlay & Overlay), Pneumatic & Hydraulic check as per job scope.• Removal of Gauge glass & stand pipe for service & testing.• After all inspection DPT, PAD, UT & repairs, Hydro test or Pneumatic to be carried out as per job scope. Show less Inspection & Maintenance of Drums/Vessels, Columns, Reactors & Exchangers.• Supervise the work and give necessary clarifications to sub-contractors as required.• Make day-to-day planning and monitor the progress at site.• Carry out inspections related to pressure test activities as per test package and P&ID.• Attend Daily meetings with the discipline engineers and construction people to resolve any outstanding issuesand take corrective action wherever required.• Making Proper ventilation near the entry & exit areas at the closed confined areas in vessels.• Cleaning of drums/vessel, Heat Exchanger. Removal of demister-pad, Adsorbent, Tubes, Filter & cleaning orreplacement as per job scopeJUNE.• Bolt Servicing, Blinding & Deblinding, Air Ejector Installation.• Insulation removal at damage areas.• Proper lightening arrangements for inspection. Show less

  • Mechanical Maintenance Engineer (shutdown)

    Jan 2017 - Sept 2017

  • Mechanical Maintenance Engineer

    Jan 2017 - Sept 2017
• 

  Rotostatic Services

  Oct 2017 - Jan 2019

  Piping Supervisor

  Preparation of daily wise report and meeting with the management for the completion of the work.• Raw Material inspection & follow up drawings as per structural codes & standards.• Expertise in work method of statement, P&ID, pipe plan, Iso, pipe support and structure drawing.• Accountable for fulfilling production, planning, supervising labor workforce, tools, providing technical helpto complete the work scope according to the need.• To make Cutting Plan of the raw material to minimise the Scrap.• To maintain the Records of the Job/Drawing in Progress.• Fabrication, Assembly, erection and alignment of the Steel Structure, Piping, Equipment & NDT Clearance ofthe same as per Project Specification Codes.• Ensuring availability of material front for timely completion of job.• Keep track of the material consumed and various other procurement activities. Show less

• 

  TeamLease Services Limited

  Feb 2019 - Dec 2022

  Piping Engineer

  Overall responsible for fabrication & erection works in project sites including pipe support fabrication, erection and alignment of the Steel Structure & NDT Clearance of the same as per Project Specification Codes. & field erection of fabricated items.Preparation of Material Requisitions as per site requirement.Prepare work schedules of all related activities to ensure smooth operation of project.Supervise the site supervisors & foreman according to job requirements.

• 

  ENTER Engineering Group

  Mar 2023 - now

  Structural Engineer

  Preparation of Material Requisitions as per site requirements.Preparing and monitoring of Structure fabrication sequencing as per the codes and standards during fabrication work is performed in accordance with the approved construction drawings.Responsible for conducting daily toolbox meetings and safety awareness for all the workers.Responsible for all aspects of day-to-day fabrication and erection activities of the project in terms of safety.Responsible for getting all kinds of work permits needed prior to starting the job and responsible for safety issues related to the job.Implementing a project documentation systemAttending meetings with the clients to solve issues related to fabrication and erection. Show less