David Gonza

Experience

• 

  Oscar Industries Ltd, Kampala Uganda

  Jan 2009 - Jul 2012

  Production Engineer

  I supervised production staff, managed the repair, installation, and maintenance of machinery, and assisted the production manager with the implementation and adjustment of production plans.

• 

  Fine Print Industries Limited

  Jul 2012 - Aug 2014

  Production Engineer/Senior Mechanical Technician

  Production Planning, People/floor Management and Supervision, Procurement of Spare parts, Writing/Presenting of Production Reports to management,Maintenance, repair and installation of Machinery, Supervision of Workshop Machinery,Accounting for raw materials released, Continuous improvement, Ensure safety for both People and machinery, Motivate, Appraise and ensure achievement of target.

• 

  4Ward Development West Africa Ltd.

  Sept 2014 - May 2022

  Production & Installations Manager

  Over the years, I have installed over 100 solar-powered water systems, managing up to 270KW in power capacity. My responsibilities included handling electronic wiring, installing solar modules, setting up Grundfos solar pumps, and performing plumbing work. Additionally, I trained quality controllers throughout this process. I was also involved in the manufacture of manual water well drilling tools and equipment, where I scheduled production to meet targets and ensured adequate stock of raw materials. My role extended to training workshop technicians in the use of specialized production tools and GMP methods, overseeing daily workshop operations to ensure tasks were completed safely and efficiently, and maintaining all workshop assets. I adhered to health and safety procedures, prepared reports to document production activities, and inspected completed work to meet quality standards. I also took on miscellaneous tasks as needed to support the company’s ongoing success, as directed by headquarters. Show less

• 

  DJOSER ENGINEERING

  May 2022 - Jan 2023

  Mechanical & Technology Engineer

  I managed engineering teams and provided training for staff and technicians on Standard Operating Procedures (SOPs). My work covered a broad range of responsibilities including welding and fabrication of various types, repair and maintenance of industrial machinery, and solar energy projects. I also specialized in designing and installing water filtration systems, handling plumbing tasks, and overseeing machinery installations. Additionally, I conducted engineering research to support and enhance project outcomes. Show less

• 

  BLACKSTAR RAIL LIMITED

  Jan 2023 - Mar 2024

  I developed and implemented the company’s CSR and media strategy while recruiting, building, and managing a team of four at Blackstar Rail Ltd. I oversaw the preparation of RAMS and LCC programs, as well as RAM technical reports, including RAM analysis and logs for Siemens and Hitachi Rail. My responsibilities also included planning and managing RAMS for railway systems, rolling stock, CBTC, and ETCS signaling, including command and control systems. Additionally, I conducted FMEA, FMECA, FTA, RCA, MTBF, MTTR, and RCM analyses for Siemens. Show less I planned and managed the reliability, availability, maintenance, and safety (RAMS) for railway systems, including rail tracks, rolling stock, and command and control systems like CBTC and ETCS signaling. My role involved managing an engineering team, performing data analytics, and preparing RAMS and LCC program plans to outline the reliability, availability, maintenance, and security objectives of the railway systems. I conducted Failure Mode and Effects Analysis (FMEA), Failure Mode, Effects and Criticality Analysis (FMECA), and Fault Tree Analysis (FTA) on train systems. Additionally, I participated in project management discussions and reporting, monitored the reliability and maintenance of systems during commissioning and warranty periods, and produced reports on system performance.I identified and reported systems that did not meet program objectives, assisting the Chief Engineer with corrective action plans and ensuring compliance with RAMS contractual requirements and LCC program plans. My responsibilities also included producing technical railway safety case reports, maintaining detailed documentation on system failures, and developing hazard logs through HAZID. I prepared risk assessments and safety justifications for testing and migration phases, conducted reliability modeling and growth analysis, and engaged in research and development, including feasibility and cost-benefit analysis. Furthermore, I reviewed electrical schematics and mechanical engineering drawings and managed subcontractors working on behalf of the company. Show less

  • Senior Railway Engineering Consultant

    Aug 2023 - Mar 2024

  • Railway Engineering Consultant

    Jan 2023 - Jul 2023
• 

  Westwind Energy SL Limited

  Apr 2024 - Jun 2024

  Engineering Consultant

  I carried out a comprehensive analysis of the production processes, identifying the need for retooling and adjustments to labor requirements for mass production. Following this, I issued a detailed report on my observations. Using SolidWorks, I designed and converted individual parts for new stove products into G-code. Additionally, I fine-tuned the CNC plasma cutter with new settings to achieve precise cutting and identified spare parts that needed to be procured.

• 

  USG Research Consults

  Jun 2024 - now

  Senior Engineering Consultant

  I conducted an in-depth analysis of engineering projects valued at US$ 30 million and provided critical support for feasibility studies.

• 

  Envirofit International

  Dec 2024 - now

  Factory Production Manager

  1. Production Management • Oversee the entire manufacturing process, ensuring efficient productionflow and timely completion of orders.2. Machine Maintenance • Established and oversee a regular maintenance schedule for allproduction machinery.3. Material Planning and Inventory Management • Plan and manage the procurement of raw materials, ensuring thatinventory levels are maintained to meet production demands.4. Quality Control • Implemented and maintain quality control processes to ensure that allproducts meet or exceed customer specifications.5. Staff Management • Lead and manage a team of production workers, including machineoperators, technicians, and quality inspectors.6. Health and Safety • Ensure that all safety protocols are followed and that the factoryoperates in compliance with all relevant health and safety regulations.7. Reporting and Documentation • Prepare and submit regular reports on production output, inventorylevels, quality control, and maintenance activities. Show less