Javier Siscar

Experience

• 

  MTorres Diseños Industriales S.A.

  Jul 2011 - Aug 2011

  Field Engineer

  Internship as a field engineer for the automation department. Participation in the starting process and development of validation tests for an A380 VTP fixture.

• 

  Universidad Politécnica de Valencia

  Nov 2011 - Jul 2012

  Investigation grant

  Collaboration grant associated with the Eurocopter chair, developed at Technical High School of Design Engineering. My responsibilities included the identification and cataloguing of aviation gas turbine components (CFM56), and the development of a virtual laboratory for the simulation and study of gas turbines.

• 

  Cassidian

  Jan 2013 - Jan 2014

  Flight Test Engineer

  Internship within the Flight Test Department giving support to the following activities:- Eurofighter programme:o Planning and coordination of in aircraft activities associated to airworthiness directives, periodic maintenance tasks, DOIs and RFAs.o Planning, monitoring and execution of functional tests (TPBs) into prototype aircraft as well as into production aircraft.o Aircraft configure and dispatch previous to any ground/fight test.o Monitoring and correction of inflight defects/snags opened in the aircraft logbook.o Management of all the equipment and material related to the performance of the different tasks and tests into the aircraft. - ATLANTE programme:o Capturing all the different system specialists flight/ground test requirements in order to generate the test matrix and the flight test plan.o Study and analysis of the viability of the flight test range.o Flight test planning and elaboration of the applicable flight test card.o Flight test instrumentation specialists support. Visa mindre

• 

  Altran España

  Jan 2014 - Apr 2018

  Ground Test Engineer within Airbus Defence and Space developing the following activities:- FT4B (C295 Demonstrator):o Ground test procedures definition including wiring tests, semi-functional and functional tests.o Execution of the ground test campaign for the integration of a fly-by-wire based flight control systemo Verification of the ground test support equipmento Specification of the FTI parameters representation (MONDIS) for their monitoring during ground/flight test operations- A310 y A330 MRTT:o Execution of the ground tests and functional tests for the verification of the Air-Refueling system and in particular of the Boomo Specification of the FTI parameters representation (MONDIS) for their monitoring during ground/flight test operationso Rapid prototyping:> Specification of the panels for a new console intended for the control of the Air-Refueling system > Equipment installation and prototype build-upo SW specification of an application intended to support maintenance procedures on Air-Refueling system.o Concept design, specification, ICD definition, 3D model design and support to the manufacturing of ground test support equipment. Visa mindre Systems Engineer within Airbus Operations Exterior Lights (ATA33-40) Design Office developing the following activities:- In-service fleets (SA, LR, A380):o Resolution of in-service queries associated to issues detected by the operators, providing technical support and troubleshooting.o Support to the technical publications department for the edition and verification of the maintenance tasks associated to exterior lights system.o Support to the development and modification of in-service equipment with the following responsibilities:> Management of the different suppliers> Agreement and definition of the qualification test plans for the different equipment> Follow-up of the qualification test campaign, evaluation of the test results and coordination with the specialists> Planning and monitoring of the project/development- New programmes (A330neo - Landing Light):o Supplier managemento Agreement and definition of the qualification test plans for the different equipmento Follow-up of the qualification test campaign, evaluation of the test results and coordination with the specialistso Definition of the Principle Diagramas related to the exterior lights system and their uploading into the different configuration toolso Verification of the installation requirements Visa mindre Systems Engineer within Airbus Operations Pneumatic System (ATA36) Design Office, giving support to both in-service programmes (A320, A330/A340 y A380) and new developments (A350, A330neo y A320neo), performing the following activities:- Requirements specification for the development of new modifications affecting the systems the in-service aircraft.- Definition of V&V plans for the validation and verification of modications affecting the system into the in-service aircraft. - Definition of FTRs (Flight Test Requirements) y GTRs (Ground Test Requirements).- Handling validation and verification MoCs in DOORS Visa mindre

  • Ground Test Engineer - Flight Controls / Air-Refueling System

    Jun 2016 - Apr 2018

  • Systems Engineer - ATA33-40 Exterior lights

    Apr 2015 - Jun 2016

  • Systems Engineer - ATA36 pneumatic system

    Mar 2015 - Apr 2015

  • Validation and Verification Engineer - ATA36 Pneumatic system

    Jan 2014 - Mar 2015
• 

  Saab

  Jan 2018 - now

  Systems Engineer Leader for the development of a secondary flight control and actuation system (flaps and spoilers) at Saab Avionics, performing the following activities: o Project technical coordination o Customer technical support and coordinationo System (including system, safety and ILS/RMS) team leading including planning (schedule and budget) and coordination activities o System and subsystem levels requirements specification o System and subsystem levels design development o System integration and testing planning and coordinationo System qualification plans development Visa mindre System Architect within Saab Avionics developing the following activities:- EFVS (Enhanced Flight Vision System) System Architect:o Definition of system architecture accounting for all stakeholders requirementso System specification and system design evolvemento System integration and coordination with the different subsystems and/or componentso Coordination with SW level development and prototyping activities o Customer support- Integration and Test RIG (for EFVS) Technical Leader:o Integration and Test RIG architecture designo Support to Integration and Test RIG (HW/SW) detailed developmento Team coordination and development planningo Coordination with main system project to support test activities- Systems Engineering Forum coordinator:Coordination of a forum involving all systems engineers within Saab Avionics, having the following main goals:o Development and improvement of systems engineering processes and methodso Sharing of project achievements, lessons learnt and best practiceso Knowledge capitalizationo Support to the development of a structured learning path for systems engineers including the promotion of specific educations Visa mindre

  • Engineering Manager

    Sept 2024 - now

  • Systems Engineer

    Nov 2023 - Sept 2024

  • Systems Engineer Leader - Flight Controls (Flaps and Spoilers)

    Jan 2021 - Nov 2023

  • Validation and Verification Leader (VVL) - Flight Controls (Flaps and Spoilers)

    Jul 2020 - Jan 2021

  • Systems Engineer Leader - Avionics (Enhanced Flight Vision System, EFVS)

    Mar 2020 - Jul 2020

  • System Architect - Avionics (Enhanced Flight Vision System, EFVS)

    Apr 2019 - Mar 2020

  • Systems Engineer - Avionics (Enhanced Flight Vision System, EFVS)

    Jan 2018 - Apr 2019