Experience

• 

  Pipe link construction pvt ltd.

  May 2008 - Jun 2009

  Ndt coordinator

  Inspections activities like Fabrication, Welding, Hydro testing, Sand Blasting, Painting and Coating.Preparation of all QA/QC documents like Test Pack, Welding inspection Reports, Detection test, Hydro Testing and Commissioning reports etc.Coordination with the QA/QC Supervisor regarding all NDE matters

• 

  Jiacco pakistan pvt limited

  Jun 2008 - Jan 2009

  Ndt inspector

  Perform magnetic particle inspectionPerform Radio Graphic Testing inspectionPerform Dye penetrates inspection per company qa/qc procedureMake all inspection reports

• 

  Ffbl

  Nov 2009 - Dec 2010

  Qa/qc supervisor

  Conduct frequent meetings with in the company to ensure smooth execution of all construction activities according to applicable codes & standards.To conduct Welders Qualification Tests according to WPS and preparation of PQR & Welders Qualification Record.Implementation of codes standards & quality inspection Plans.Inspection of all construction activities like Fabrication, Erection, Welding, Sandblasting, Painting & Coating to the applicable specifications and codes.Preparation of all QA/QC documents and QA/QC Dossier for project.Regular In house training programs, Inspections and QA/QC audits using company/ client approved Standards/ Specifications, Procedures/Checklists عرض أقل

• 

  Applus+ asia middle east and africa

  Jan 2010 - Feb 2011

  Ndt coordinator

  Radiograph film interpretation and organization of all NDE activities as per Standard requirements.Establishment of a system to control the project repair rate and monitoring of welder performance.Review of RT, DPT, PWHT and Hardness Reports.Identify repair and re-inspect with NDT after re welding the joints.Monitoring day-to-day record of running repairs, and all films.Submission of all NDT record to Client as per approved Procedure and requirement.Perform Incoming Material Inspection verifies MTCs according to Code, Project Specifications and Applicable Standards.Ensure handling, & storage of Materials in accordance with Project Specifications and Approved procedure as Agreed with Client .Monitor all welding activities during execution and erection, and final inspection with client.Co-ordinate in preparation & Implementation of Inspection Test plain (ITP), as per applicable code and Project Specifications..Monitor all the fit up, orientation Dimensional Check عرض أقل

• 

  Synergy petroleum international

  Aug 2011 - Mar 2012

  Qa/qc inspector

  Preparation of Method Statements and procedures according to applicable codes and Standards for smooth and safe execution of work.Implementation of codes standards & quality inspection planesInspections of all activities like Fabrication, Welding, Hydro testing, Sand Blasting, Painting and Coating.To conduct Welders Qualification Tests according to WPS and preparation of PQR.Coordination with the Client & Third Party regarding all NDE mattersPreparation of final punch list and rectification of punch points.Preparation of all QA/QC Dossier. عرض أقل

• 

  Inspectest industrial solution llc

  May 2012 - Aug 2012

  Ndt inspector

  nterpretation of Radio graphic Testing, verification of MPI and DPT results, Hardness TestingSupervision of NDT TEAM regarding RT/UT/MT/PTCoordination with clients and AI regarding final reports of NDETo observe and monitor the implementation of inspection and test plan with Regards to welding related activities at Fabrication ShopsInspection of Pressure Vessel, Heat Exchangers and Boilers components as per Drawings specificationsKeeping all inspection equipment history files up-to-date and also keeps on-stream inspection data current. Carries out other related duties such as updated of new technical methods of inspection, especially in field of NDE UT of pressure vessels, heat exchangers, boilers, economizer, super heaters, blow down tanksInterpretation of Radiographic Films. UT of steel structure, beams, and lamination check for platesDPT of pressure vessels, tubes sheet of heat exchanger, coil bending for heat exchanger and non-pressure parts of vessels and boilersDPT of steel structure and fabricated steel structureMT of bevels before welding and for surface cracksInterpretation of MT and PT Inspections. Ultrasonic Flaw Detection of Plates, Shafts, Piping and Vessels. Ultrasonic Thickness Monitoring of Piping and Vessels with T-Mike and DMS2 TC. Surface Preparation and inspection of Paint application in accordance with SSPC standards. Thickness Monitoring and Adhesion testing of paint with Elcometer. Holiday detection of raping and paint coatings with Elcometer. Ferrite testing of duplex and stainless steel materials. Hardness testing of different materials Visual inspection of welding. Visual inspection and Profile checking of sand blasted piping and vessels عرض أقل

• 

  Descon engineering limited

  Jul 2012 - Jun 2013

  Qa/qc inspector mechanical

  Review of WPS, PQR & WPQR. In accordance with the specificationsReview of QIP in accordance with the specificationsWitnessing Welder’s Qualification Test and Performance test in accordance with WPSVerification of materials, material receiving inspection prior to release for fabricationReviewing Procedures for Documentation as per plant specificationsResponsible for Fit-up, Welding inspection and erection of any products related to fabrication worksEnsure that all fabrication and erection by welding is performed in conformance with the requirement of the contract documentUndertake workshop verification of Electrode Baking and Storage to ensure that it will meet the job requirement specificationsIdentify and marked up of every welded joint applicable for NDEPreparing of inspection reports and other documents for clients approvalWitness the inspection and tests at sites and fabrication shop according to approved ITP and verify the inspection reports and validating the results Inspection of finished products regarding welding as per drawings and client requirements Maintaining the record of welders, reports, procedures as per client and code requirementsMaintaining repair records and controlling repair rate of welder’s by analyzing the repair’s, job conditions, welding techniques along with the QC Welding Engineer Conducting shop surveillance audit for the improvement of procedure and client requirements implication Arranging tool box talks to increase awareness in welders regarding welding repair rate, welding activity and procedure requirements Raise NCR against non-conformance and maintain log sheets Monitor and follow up the timely close out of non-conformance, corrective action requests and preventing action request To ensure the implementation of quality manual specification To observe and monitor the implementation of inspection and test plan with Regards to welding related activities in Fabrication Shops عرض أقل

• 

  Ekl- engineering kinetics (pvt.) ltd.

  Aug 2012 - Dec 2012

  Qa/qc & ndt coordinator

  Review material certification for project material to ensure it meets specification and check that it corresponds to actual material suppliedReview and implement WPS and PQR as per project scope.Witnessing welder test and giving instructions to contractor to prepare the welder ID card and certificatesTo ensure that all activities concerning welding and painting are carried out in strict accordance with written or agreed practices or specificationsMonitoring all QA/QC activities as per approved ITPSurveillance inspection of welding equipment, materials, filler wire, electrode backing and drying ovens and its calibration.Conduct any quality control investigations as deemed necessary.Monitoring the daily contractor inspection activities that meet the product quality requirements of the project quality plan.Monitoring and inspection of underground piping RTR, GRP and HDPE as per manufacturing and project specification عرض أقل

• 

  Petromen contracting & oil field services

  Jun 2013 - Jan 2017

  Qa/qc inspector

  Review of WPS, PQR & WPQR. In accordance with the specificationsReview of QIP in accordance with the specificationsWitnessing Welder’s Qualification Test and Performance test in accordance with WPSVerification of materials, material receiving inspection prior to release for fabricationReviewing Procedures for Documentation as per plant specificationsResponsible for Fit-up, Welding inspection and erection of any products related to fabrication worksEnsure that all fabrication and erection by welding is performed in conformance with the requirement of the contract documentUndertake workshop verification of Electrode Baking and Storage to ensure that it will meet the job requirement specificationsIdentify and marked up of every welded joint applicable for NDEPreparing of inspection reports and other documents for clients approvalWitness the inspection and tests at sites and fabrication shop according to approved ITP and verify the inspection reports and validating the results Inspection of finished products regarding welding as per drawings and client requirements Maintaining the record of welders, reports, procedures as per client and code requirementsMaintaining repair records and controlling repair rate of welder’s by analyzing the repair’s, job conditions, welding techniques along with the QC Welding Engineer Conducting shop surveillance audit for the improvement of procedure and client requirements implication Arranging tool box talks to increase awareness in welders regarding welding repair rate, welding activity and procedure requirements Raise NCR against non-conformance and maintain log sheets Monitor and follow up the timely close out of non-conformance, corrective action requests and preventing action request To ensure the implementation of quality manual specification To observe and monitor the implementation of inspection and test plan with Regards to welding related activities in Fabrication Shops. عرض أقل

• 

  Enerflex ltd.

  Jan 2017 - Jan 2018

  Qa/qc inspector
• 

  Arabian construction co.

  Apr 2018 - Feb 2020

  Welding inspector
• 

  Nervion industries, engineering & services, s.l.

  Feb 2020 - Oct 2021

  Quality control engineer

  • Adhered to safety and clean area procedures to comply with agency and regulatory mandates.• Developed and audited practices, programs, and reporting system metrics for optimal efficiency.• Conducted data review and followed standard practices to find solutions.• Performed visual assessment of products to evaluate conformance with quality standards.• Inspected welding joints and compared against standards to meet regulatory requirements.• Documented and executed detailed test plans and test cases and summarized and logged audit findings for reporting purposes.• Monitored testing procedures and verified the performance of tests according to established item specifications and protocol. عرض أقل

• 

  Lrqa

  Oct 2020 - Nov 2023

  Qa/qc engineer ( shanghai electric & lrqa )

  • Conducted analyses of both in-process and completed welding of SS/CS materials, components, and products.• Drafted technical documents such as deviation reports, testing protocol and trend analyses.• Conducted investigations into questionable test results.• Determined root cause of deviations and non-conforming results and implemented appropriate corrective and preventive actions throughout product development process.• Interpreted test results by comparing to established specifications and control limits, making recommendations on appropriateness of data for release.• Reviewed and validated quality requirements for manufacturing planning, supplier purchase orders and engineering specifications to meet contract compliance regulations.• Completed supporting documentation for testing procedures, including data capture forms, equipment logbooks and inventory forms.• Identified and resolved variances to bring products in line with requirements.. Preparation / Review of procedures, ITP, WPS عرض أقل