Rowell Carreon

Experience

• 

  Santa Monica Industrial Corporation

  Sept 2007 - Oct 2008

  Welder

  Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, and or other structures such as window grills and gates. Lays out, positions, and secures parts and assemblies according to planTack-welds or welds components and assembliesCuts work piece, using oxygen and acetylene or other flame Removes rough spots from work piece using grinder.Welds components in flat, vertical, or overhead positions.Analyzes engineering drawings and specifications to plan layout, assembly, and welding operations. Show less

• 

  Keppel Subic Shipyard ( formerly know as Subic Shipyard and Engineering Inc. )

  Nov 2008 - Feb 2013

  6G Welder ( GTAW/SMAW )

  Certified Pipe welder or 6G welder ( GTAW/SMAW Operates Gas Tungsten Arc Welding (GTAW) Carbon Steel used filler wire TGS-50 or mild steel and Stainless Steel used filler wire 308L, 312L, 316L and Operates Shielded Metal Arc Welding (SMAW).Welding groove, pipe on a horizontal position, vertical position and a 45 degree inclined position.Fabricate, tack and full weld any kinds and sizes of non-pressurize to pressurize pipes such as hydraulic pipeline, diesel oil and fuel oil pipeline, oxyacetylene pipeline, cooling line, heating coil line, ballast pipeline system of the ship, fresh water line, exhaust pipe, grey water pipeline, sewage line, fire line, diesel tank, fuel tank and many pipe line system on the ship.Common pipe sizes and schedule welded from 6 mm to 900 mm pipe sizes, pipe schedule such as 20,40,60,80,120 and 160Common used welding rod E6010, E6011, E6013, LB-52U for root pass and AWS A5.1 E7016 Kobelco or AWS E7018 Nihon welding rod.,Can read and interpret pipe plan system drawing.Can also operate FCAW , gas weld, oxygen manual cutting machine, semi- automatic cutting machine and gouging Performs welding, flame cutting, spraying and soldering metal parts by means of oxygen and acetylene or other flame.Examine parts to be welded to determine best method to use, cuts and prepares surfaces of parts to be welded, select torch nozzle and attach it to blow pipe.Lights torch and adjust flame by regulating flow of gasses, heat parts until they begin to melt and fuses them by applying molten metal from a welding rod, runs flame and welding rod along joint, cleans and smoothen welded part.Follow and exercise safety by using the company's prescribed safety apparels.Perform other duties as may be assigned by superior. Show less

• 

  Saudi Kad Engineering and Construction Company

  Aug 2013 - Sept 2015

  Tig and Arc welder

   Certified combination welder at Saudi Aramco Project.Qualified to weld cs, ss using GTAW/ SMAW process. Responsible for full welding of different size of pipe. small bore, big bore or carbon steel pipe. Checked the type of edge preparation and fit up including root gap, root face, bevel angle, alignment and joint cleanliness. Ensure that the filler rod and Electrodes should be compatible to the base metal and be sure that all surface to welded shall be free from any kind of dirt (paint, grease, rush and etc.) Ensure that all work must be done right at the same time with quality and with observance of safety rules and regulation. Show less

• 

  Saipem

  Jan 2017 - Jan 2022

  Tig and Arc welder

  Certified 6G combination welder at Saudi Aramco project.Can weld stainless steel, carbon steel, copper nickel, dissimilar metal, duplex and super duplex and etc.Can operate also fcaw welding process.

• 

  Taylors Engineering and Welding Services

  Mar 2022 - now

  Coded Welder