Experience

• 

  Cern

  Mar 2008 - Aug 2008

  Summer trainee

  ContextI worked for the Master training period. The title of the project was: « Numerical Study of buckling behavior of cold mass experiment structure integrated in the Large Hadrons Collider ». Technical Support Department.AchievementsFP420 project:- Design of the structure.- Numerical study: bulking behavior of the structure.- Manufacturing comp of the structure, buckling tests, validation of the numerical model.- Norm data’s update.- Member “invited” of the CATIA expert group for the Technical Support Department. Show less

• 

  Lmgc laboratoire de mecanique & genie civil universite montpellier ii

  Oct 2008 - Aug 2009

  Master degre's trainee

  Context Numerical simulation of contact between a tip of Atomic Force Microscope and the cell wall of woodAchievements - Nano indentation testing machine, study of the mechanical behavior of the wood (anisotropic property, heterogeneous media, mechanical characteristics). - Material constitutive equations, introduction of exotic stress in the numerical model (e.g. Van Der Waals). - Meshing test. Numerical simulation in 3 dimensions. - Influence study of anisotropic degree on the contact. - Numerical material model for wood anisotropic and heterogeneous properties. ValidationMapping of a cell wall of wood with AFM testing machine. Show less

• 

  Arts et métiers paristech - ensam/ psa peugeot citroen

  Mar 2010 - Aug 2010

  Master degre's trainee

  Context Hydrostatic stress effect on the fatigue behavior of metal materials applied to a problem of fatigue design of cylinder heads for diesel and gasoline cars. This project was motivated by PSA-Peugeot-Citroën industry group. Mechanics lab research. Arts et Métiers Paristech (French Engineering School).Achievements- Analyze the fatigue behavior for different aluminum alloy material.- Quantification of damage with tomography testing machine.- Fatigue testing machine. Study of the evolution of porosity.- Study of different models for fatigue and damage behavior of metals (Dang Van, Gurson (GTN), Lemaïtre-Chaboche).- Optimization of parameters, with ABAQUS CAE for the numerical simulation, Matlab to drive the simulation and traction testing machine for the material, from Gurson model for an aluminum alloy using by PSA-Peugeot-Citroën industry group. Show less

• 

  Alten

  Mar 2011 - Feb 2016

  Consultant as engineering project manager

  Confirm and Senior Consultant in Mechanical Engineering, Science Material Engineering and Project Management

• 

  Ferrari

  Jul 2011 - Dec 2011

  Mechanical and material engineer

  Contexts: - Development of a methodology for design of crankshaft (for calculating and testing one). - Complete design of a crankshaft (equilibrium, influence of geometry on the mechanical, vibration and fatigue strength for Formula 1 engine and Helicopter engine).Achievements: - Depth expertise on the finite element software ANSYS WORKBENG 13.0 and nCode 7.0- Depth expertise on DANG VAN fatigue criteria to study the fatigue behavior of crankshaft for Formula 1 Engine.- Writing of a methodology about the design of a crankshaft for Formula 1 engine in English and in French for engine:- Formula 1 engine (gasoline engine) for P.U.R.E.- Chopper Engine (diesel engine) for EUROCOPTER. Show less

• 

  Fives

  Jan 2012 - Feb 2012

  Mechanical engineer
• 

  Cim - compagnie internationale de maintenance

  Mar 2012 - May 2012

  Mechanical and material engineer

  Context- Implementation of Finite Element Calculation Methodology. - Fatigue design sizing by Finite Element Methodology for Industrial product (coupling (or towbars) Freight Trains).Achievements- Design with CAD software of coupling system,- Finite Element calculation,- Finite Element Calculation Methodology of Engineering,- Fatigue Design Sizing by Finite Element Methodology and DANG VAN model for coupling systems.

• 

  Utc aerospace systems

  May 2012 - Sept 2013

  Technical project manager – product engineer, lead engineer - mechanical and material engineer

  ContextResponsible for the implementation of new and modified Rescues Hoists; Winches Systems and processes in the production environment by making use of processes and developments product.Achievements- Development and Industrialization of Control Pendant for EUROCOPTER Deutschland (EADS)- Development and Industrialization of a Rescue Hoists for India (H.A.L.) and Brazil (BRAZILIAN AIR FORCE) customers- Technical Project Manager: List Management Actions, Management of Milestone and important step and technical document deliverable,- Matrix of Risk management, - Implementation of a work plan, costs and development of a Rescue Hoist,- Respect QCD and Increase efficiency respecting existing approved processes- Decrease engineering costs,- Manages a regular risk analysis- Design Justification, FMECA (AMDEC), Safety and Reliability, Qualification Tests Procedure, Acceptance Tests Procedures. - Technical Description Report for customers. Response to request for Proposal - Steering supplier for prototyping and series parts. Supplier based in South America and U.S.A.- Steering projects with US and Japanese colleague- Steering of supplier concerning Qualification Tests,- Relationship with customer.- Knowledge in Aeronautical norms (military norm MIL Standard 810 and civil norm RTCA/DO 160),- Rescue Hoists and Winches Laboratory Responsible. Matrix of Risk Analysis for TRIAL: Engineering and production line in cooperation with E.H.S. UTAS (Environment, Health & Safety) department,- Investigation Lead of Rescue Hoists and Winches. Investigation as Mechanical and Material Engineering for Engineering department and Production Line. Show less

• 

  Atmostat

  Sept 2013 - May 2014

  Technical project manager

  Context- Safety and reliability study of armament locking system, maintenance of the product from 20 to 30 years’ service.- Aging Study of a locking systemAchievements- Analysis of test data and expertise since the manufacture system,- Analysis of modelization models and input parameters, check of the calculation code and its validity,- Validations of parameter and recommendations for improvement and additional studies to meet the objectives set by customer,- Autonomous on the topic and freedom on the analysis and reviews of the design process, qualification process and manufacturing processResults- Validations of parameter and recommendations for improvement and additional studies to meet the objectives set by customer,- Proposition of the total project cost for proposed improvement. Evaluation of risks. Show less

• 

  Thales

  May 2014 - Dec 2014

  Technical project manager

  Context Project manager for the numerical study of the thermal behavior, thermic and vibration system and radio frequency microwave.Project: Study of thermomechanical spatial microwave tube.Thermomechanical study of an issuer military radiofrequencyStudy of a vibration transmitter,Vibration Study of advanced collectors.Performance of PCB component with the stability of entry power of drilling machine in space environment. Check of motions and clockworks of drilling machine, and turnaround of spindle. AchievementsMicrowave tube- Validation of thermal resistance RF and Microwave system,- Validation heat resistance, mechanical and vibratory systems and microwave radio frequency,Cutting and Drilling machineFrom the PCB size:- check the input and output response of components,- check the input and output of the motion drilling machine,- check the input and output of turnaround of spindle,The audits were performed with the cutting drilling machine / CNC / frame from GDCA series. Min. : 40 rpm (251.33 rad.min-1) / Max. : 3000 rpm (18849.56 rad.min-1)For high-speed production, it's very important that the control component could be enough efficient to provide a continue power and information for cutting and drilling strongly.What we did is to check that the clockwork of drilling machine responds correctly (error less than 0,0001%) to the information coming from the operator Results: - Validation mechanical strength and thermal RF and microwave systems. - Validation of PCB and collectors size,- Validation of cutting and drilling machine performance and effectiveness- Delays and costs are respected. Show less

• 

  Spie nuclear & areva

  Jan 2015 - Jun 2015

  Senior project manager

  Context Responsible for the implementation of new and modified products in the production environment by making use of processes and developments improvement.AchievementsManage the technical quality, the schedule and the budget of the project by:Checking the resistance to static and dynamic media:- Establishment of a shell model,- Finite element for keeping the structure and welds,- Calculation of an optimized wrench. Angle Plate. Plate / plate against eccentric. Traverses flat. Support bracket.- Checking the holding of turntables and ankles- calculations according to a set of existing configurations,Refine keeping with optimization calculations tensor,- Placing pins on models from the central to not interfere with the reinforcement,- Instant response if problems identified on the site,- Creation / modification / changes Schedules Media,- Updating existing nomenclatures,- Broadcast to the end customer,- Setting up of only a roadmap for monitoring changes in classifications.Results:- The supports are validated. Otherwise, you are asked to change with a derogation. Delays and costs are respect.- The pegging is validated. Otherwise, you are asked to change with a derogation.The supports are validated by Nomenclature. Delays and costs are respected Show less

• 

  Areva

  Jun 2015 - Jan 2016

  Senior project manager

  Context Responsible for the implementation of new and modified products in the production environment by making use of processes and developments improvement.AchievementsManage the technical quality, the schedule and the budget of the project by:Checking the resistance to static and dynamic media:- Establishment of a shell model,- Finite element for keeping the structure and welds,- Calculation of an optimized wrench. Angle Plate. Plate / plate against eccentric. Traverses flat. Support bracket.- Checking the holding of turntables and ankles- calculations according to a set of existing configurations,Refine keeping with optimization calculations tensor,- Placing pins on models from the central to not interfere with the reinforcement,- Instant response if problems identified on the site,- Creation / modification / changes Schedules Media,- Updating existing nomenclatures,- Broadcast to the end customer,- Setting up of only a roadmap for monitoring changes in classifications.Results:- The supports are validated. Otherwise, you are asked to change with a derogation. Delays and costs are respect.- The pegging is validated. Otherwise, you are asked to change with a derogation.The supports are validated by Nomenclature. Delays and costs are respected Show less

• 

  Ngo cerads & solidafrica

  Apr 2016 - May 2016

  Humanitarian mission for well water build

  1- Run the Excavation soil machinery received through a donation from WB.2- Perform tested on neutral zone. Control the performance and level of maintenance of the machines. If necessary change parts and repairs. Improvement of maintenance level.3- Perform excavation soil with geologists for dewatering and bypass setting on electric machine for setting pumping and distribution.4- Training of irrigation farmers , mechanics, management and output,5- Math and Physics teacher for high school level student Show less

• 

  Optima limited

  Jun 2016 - Feb 2018

  Chief operating & project officer

  ContextOPTIMA LTD. is the first “double inline AOI” supplier in China. With the increasing of the demand, the company have developed challenging projects to support and to be able to stand by our customer form the conception of the systems until the production by integrating to PL. The aim being to target an improvement of the production and quality line in PCB industries and corporations.In this objective, my responsibility is to manage all R&D , conception and development projects from all new systems. My department manage significant projects by controlling the qualities, schedules and costs (dpt size ard 175) . Management done mainly in Mainland (China, Guangdong, Shanghai, Beijing) and in Taiwan, Malaysia, Japan and Indonesia. Achievements- AOIImprovement of production and quality (>20,000 syst/year) (NPI management, Manufacturing lead)- CNC Machine (60,000 -> 80,000 rpm; u>1m/s) , laser cutting. R&D, development and production of “Automatic Repair Machine” (>10,000 syst/year)- AVI R&D, development and production of “Automatic Visual Inspection” (>3,000 syst/year)- Catalog of Mechanical parts and system reference all other the corporation. Results- Repair Overhaul policies, procedures and standard.- By organizing the supplier catalog and costs, we improve the production by taking chain of command over the production and by classifying mechanical parts and control process,- Machine “Automatic repair Machine” development: improvement in operational profit by reducing maintenance costs and manpower.- Lock-out Tag-out catalogues and management,- Owners costs, working Capital and Ramp-up costs,- Establishing direction and strategy for project delivery including the development of monitoring systems continuous improvement, engagement of owners group with the General Manager,- Providing operational engineering input to the Project Manager on engineering and equipment performance standards and expectations. Show less

• 

  Habour technology (shenzhen) company limited

  Feb 2018 - Nov 2019

  Chief operating officer

  ContextHABOUR TECHNOLOGY (Shenzhen) Co. Limited, is a company of a fully cross-functional passionate people approach combined with deep knowledges on Smart Devices and Industry expertise to helps clients to build capabilities that they need for profitable smart devices development and growth.Based in China (Shenzhen and Dongguan) and in Hong Kong (WanShai), our service is focus on global customer's needs.Achievements1- Support strategy development and serviceBusiness Relationship, strategy and operation model. Tendering and sourcing Process Management.2- Product Development- Manage specific and standard smart devices products, creating top-line value to sustain best practices around a set of concepts- Develop “excellence” quality management in HABOUR Tech. structured around 3 concepts:o Product excellence, which includes services that help our clients to substantially improve their current and future product revenue and profitability,o Development excellence, in which we help clients set up their need with smart watches products, bracelet products and Intelligent devices with integrated fully R&D team, Manufacturing and production factories capacity.o Quality Excellence by minimizing risk of receiving non-conform product, reduce return rates and increase client satisfaction thus maximizing customer’s profits.3- Director of Engineering (R&D), manufacturing, Production and Quality.o Plastic Injection 20T, 40T and 60T; Mold Design Manager. o Smart Devices Assembly factory (8 productions lines). o Mass Production (450Kpcs capacity/months). o Quality Management Control (IQC, IPQC, OQC) Show less

• 

  Liwim technology (partnership)

  Aug 2018 - now

  Business facilitator & sourcing in china

  LIWIM Technology is a French and HK based trading company, specialized in promotional items (goodies) for major world retailers and store chains. We are specialized with Smart and Intelligent Devices Product. Our added value is based on Facilitator Sourcing Business in China (Guangdong) for Intelligent ProductOur business model is based on very competitive pricing, adaptability and reactivity to ensure that the marketing campaigns of our customers can be achieved smoothly. The range of items developed in China is very large and goes from sales uniforms, gift toys, power banks, hand fans, radio sets, (smart)watches, Bluetooth sets, sport goods, other stores decoration items...Clients: European Retailers of Smart Devices (Power Bank, Speakers, Cable, Smart Watches, and smart devices), International Sport Organization, Pharmaceutical corporation, Amusement Park, Public Government Bidding. Show less

• 

  Ceva sante animale

  Nov 2019 - May 2022

  Senior project manager poultry business

  As Senior Project Manager, I'm in charge, in International Group, to Manage Manufacturing projects in Poultry Franchise. From the negotiation of contracts, budget Engineering, Manufacturing validation, shipment until commissioning of the equipment in our partner's Hatchery, my transversal habilities in Project Management (costs, Quality and Management) provide a Continius quality representative Manager for the improvement of our partners and customers production efficiencies.My excellent communication skills bring High quality view of project management of their projects and bring successful businesses Show less

• 

  Autoliv

  Oct 2022 - Apr 2024

  Senior project manager
• 

  Safran

  Jul 2024 - now

  Program manager & engineering