Orlando Longakit

Experience

• 

  RCIC Construction - Philippines

  May 1996 - Apr 1997

  MEP Coordinator/Engineer (Site Based)

  MEP Coordinator/Engineer (Site Based)Responsible in drafting/providing engineering shop drawings as per actual site conditions and items in conflict with construction drawings. Monitor equipment and material delivery as per clients’ requirement and schedule. Review and prepare quotations for change orders subject for approval of owner representative. Prepare material take-off and estimates for mechanical works. Testing and Commissioning of Waterfalls System.Project handled:•Peninsula Manila WaterFalls Project – a 12 month US $ 2M contract Waterfalls project. System includes 1-60hp and 2-30hp recirculating water pumps, 1-15hp water treatment system. Show less

• 

  TRANS-ASIA Philippines - Philippines

  Apr 1997 - Oct 1999

  MEP Coordinator (Site Based, Intel Philippines Makati)

  MEP Coordinator (Site Based, Intel Philippines Makati)Responsible in providing HVAC design package including design calculations for building retrofits, equipment selection, engineering drawings and delivery as per clients’ requirement and schedule. Draft ducting, chilled water, and direct expansion piping layout and coordinate lay outing on CAD section. Coordinate with client progress status updates. Prepare daily, weekly, and monthly accomplishment reports. Project handled:•Intel Philippines Manufacturing Mechanical Tool Fit-Out and Basebuild Works. Bangkal Makati, Philippines. 5 storey Industrial Semiconductor manufacturing facility. Show less

• 

  Manila Kyowa Inc. - Philippines

  Oct 1998 - Oct 1999

  Mechanical Engineer

  Mechanical EngineerResponsible for mechanical design preparation, checking, construction coordination and implementations. Prepare project cost estimates, scope of works, material take-off and bid proposal preparation. Review and recommend commissioning methodology.Project handled:•PhilRice Cooling Water Irrigation Project. Nueva Ecija- Turnkey project for the start-up of 250sqm experimental chilled water recirculating irrigation system facility complete with Electrical Generator back-up, heat exchanger coils and temperature sensors. Show less

• 

  Intel Philippines Manufacturing Corp. - Philippines

  Oct 1999 - Aug 2009

  Project Manager- Mechanical Installation and Start-Up/Commissioning Engineer

  Project Manager- Mechanical Installation and Start-Up/Commissioning EngineerResponsible in mechanical trade coordination works for constructability of HVAC, Public Health (Domestic Water and Specialty Gases), Fire Fighting system. Managed facilitation, utility hook-ups of manufacturing tools and equipments. Act as Mechanical facilities start-up and commissioning engineer for basebuild facility equipments such as HVAC and Specialty Gas Equipments. Actively headed the review and design of facilities installation for all manufacturing equipment and spearheaded its installation for the whole Philippine Site. Attend weekly general coordination meeting with the other trades to be aware of their system and space requirement. Scrutinize architectural plan and trade plans requirement as basis of design analysis, computations, layouts, equipment locations.Projects handled:•CV2 32ksf Warehouse Conversion to Class 10K Manufacturing. Cavite Philippines.A 6 month $10.5M Basebuild and facility retrofits converting Warehouse space to a manufacturing cleanroom environment. Responsible in providing Mechanical Preliminary and Detailed design, equipment selection, engineering facilities start-up and commissioning of 2000TR HVAC cooling system comprising of Chillers/ Air Handlers/Cooling Towers/Pumps and Electrical system. •Q2’03 Progressive Build and CV2 Facilities Upgrade. Responsible in providing complete mechanical engineering design package of, equipment selection, engineering drawings and delivery as per facility upgrade requirement and schedule. Cavite Philippines•Manufacturing Tool Installation and De-Installation – Production Equipment Tool Facilitation, Transfer and hook-up of 500+ manufacturing equipments. Makati and Cavite Philippines Show less

• 

  Jones Lang Lasalle Leechiu – Philippines

  Sept 2009 - Sept 2010

  Asst. Project Manager- Mechanical Installation and Start-Up/Commissioning Engineer

  Asst. Project Manager- Mechanical Installation and Start-Up/Commissioning EngineerResponsible for installation, and commissioning of HVAC, fire fighting, and plumbing work for external site wide clients and building works. Review and approved material approval sheets, answer technical queries, review of contractor shop drawings, method statements, and quality plan. Tender review and recommendations including progress billing review and Attend technical and coordination meetings and prepare monthly accomplishment reports to clients.Responsible for project documentation, cost control monitoring, consultant/vendor payment certification, design and construction coordination/managementProjects handled:•Convergys Office Fit-Out – Composed of Four(4) floor Call Center Office facility, Network Server Precision A/C, Fire Pro Pre-Action System and HVAC MEP (Centralized System), 10,000 sq.mtrs. San Lazaro, Manila•Teletech GBS Office Fit-Out- Composed of Two(2) floor Call Center Office facility, Network Server Precision A/C, Fire Pro Pre-Action System and HVAC MEP works thru VRF System. 5,000 sq.mtrs., Pasong Tamo Makati•Standard Chartered Bank BPO Office Fit-Out. Composed of One (1) floor Call Center Office facility, Network Server Precision A/C, Fire Pro FM200 System and HVAC MEP works thru VRF System. Quezon Ave, Quezon City. Show less

• 

  MAXIM Philippines Operating Corp. - Philippines

  Sept 2010 - Jul 2013

  Site Project Manager

  Project ManagerResponsible in design coordination, construction site supervision and start-up/commissioning of HVAC, Mechanical Service Utilities which includes Compress Dry Air, Vacuum, Liquid Nitrogen/Gas System, Public Health (Domestic Water), and Fire Fighting system. Responsible in providing design constructability concepts; project administration works such as prebid conference, vendor selection, procurement, tender review and contract awards. In charge in mechanical facilities system inspection (QA/QC) in conformance to design plans and specifications prior to system start-up. Facilitate and lead weekly general coordination meeting with the other trades to be aware of their system and space requirement. Scrutinize architectural plan and structural plans requirement as basis of design analysis, computations, layouts, equipment locations. Responsible for project documentation, cost control monitoring, consultant/vendor payment certification, design and construction coordination/management.Projects handled:• MPOC Facility Expansion 22.5ksqm – Concept/Preliminary/Detail Design, Site Supervision and Construction Management, Mechanical System Start-Up/Commissioning of Three (3) Storey Semiconductor facility and One(1) Central Utility Plant located at Gateway Business Park, Cavite. The building is equipped with wet sprinkler system, fire cabinets and fire detection/alarm system, Compress Dry Air/Vacuum and N2 Pipelines, rain water recovery tank for non-potable requirement , office, and 86ksf manufacturing cleanroom at Class 100K environment. Centralized overhead and underground chilled and condenser water (using spiral BI piping- max.pipe size is 1000mmø spiral BI pipe for chilled/condenser water), vacuum system and compressed dry air.•Maxim Office Fit-Out 1.1K sqm - Concept/Preliminary/Detail Design of Cold Shell space to full build Office facility ~ 120 seating capacity. Fort Bonifacio Global City Taguig Show less

• 

  Mustang Al-Hejailan Dar Pi

  Jul 2013 - Feb 2018

  Site Mechanical Engineer

  Project Site Mechanical EngineerResponsible for the interpretation of all mechanical technical documents issued by Engineering Design Office related to specific system ensuring exact execution and maintaining technical quality of the work carried out by Contractor for all issued construction documents. Works also include review and approval of all technical documents including but not limited to Technical Queries (TQ), Request for Inspection (RFI), Technical Submittals, Shop Drawings, Material Approval Sheets (MAS), Method Statements, Technical Manuals etc. Review and Approval of Testing and Commissioning plans before execution of work and witnessing of Testing and commissioning activities and issuance of final approval. Responsible in assisting lead planner and Quantity Surveyor in carrying out duties in measuring progress and clarification of mechanical technical details for the purpose of estimating.Project handled:King Faisal Specialist Hospital and Research Centre Expansion Project – Riyadh KSA, composed of;1.40 x 400TR Chillers, 8 x 2.5 MVA Generators and Boiler Equipments; Electrical Substation, Mechanical Pump Rooms, Laundry Facility and Offices for Staff located at KFSH facility in Riyadh Saudi Arabia. 2.The building is equipped with wet sprinkler system, fire detection and alarm system, Novec FM200 Fire Suppression system connected to BMS. 3.Centralized overhead and underground chilled, steam and condensate piping, O2 (Oxygen), Irrigation and Sewerage system 600m in length connected in underground tunnel which serves as distribution pipeline for the new hospital and adjacent expansion buildings. Show less