Asif Anwar

Experience

• 

  AIM ENGINEERING SERVICES LIMITED

  Aug 2007 - May 2008

  Mechanical Engineer

  Being a part of Quality Control Department my duties included:• Managing the Quality Control Department at implementation level and ensuring quality of the product.• Ensuring product’s compliance with the ISO 9001:2008 standards and the company’s SOPs.• Conducting management review meetings with staff and related parties.• Conducting inspections for quality requirements• Conducting customer surveys and handling complaints in a timely fashion.• Acting as a liaison between QC and Design and Execution department.• Raising CAR’s (Corrective Action Requests) in case non-conformance is detected in technical areas. Show less

• 

  Pakistan Engineering Services (Pvt.) Ltd

  Jun 2008 - Dec 2009

  Junior Engineer

  Worked during construction phase of EPC Projects DESCON Oxychem (Hydrogen Peroxide production plant with a production capacity of 94 Matric Tons per Day) and CCPP at Bhikki (1180 MW RLNG based Power Plant) on Contractors panel. Being a part of the Planning Office my duties included:• Implementing technical plans of clients and the organization.• Project planning and scheduling using Primavera PIII.• Ensuring three days Work Front for the Execution Department.• Prepare and disseminate Weekly Progress Report (WPR) and Monthly Progress Report (MPR).• Prepare monitoring sheet of project activities for progress updating and coordinating technical queries with design department.• Perform other duties and responsibilities as may be assigned from time to time.• Calculation of scope of work using BOQ’s for sub-contractor(s).• Acting as liaison between Planning, Quality and Execution departments.• Cost Control of the project by monitoring equipment utilization and comparative statements for material being indented. Show less

• 

  Progressive Construction Company, Inc.

  Jan 2010 - Aug 2012

  Mechanical Manager

  Worked on various projects where WAPDA was client. My duties included but were not limited to:• Analyzing Contract Documents and preparing bid of a project.• Defining goals, objectives together with project deliverables with CEO.• Establish a clear line of communication with client’s responsible person incharge.• Accomplish price studies by sending Request for Quotations (RFQ’s) to suppliers of various equipment and services.• Analyzing and validating offers of suppliers and fulfilling the comparative offer tables.• Negotiation with suppliers to optimize cost.• Selecting the suppliers according to their qualifications in order to be compliant with client’s requirements.• Placing purchase orders according to requirements of site, receiving materials at site and incoming material inspection.• Planning the project activities and determining various alternatives to achieve same objective.• Scheduling the project activities and assigning and allocating the resources to meet the project deadlines and budget.• Allocation of material, manpower and equipment for daily work activities.• Ensure the productivity and high quality of performance.• Measuring performance and suggesting corrective actions when needed.• Evaluating and improving performance in comparison to project schedule. • Ensure that the latest Construction Drawings are used. • Preparing weekly and monthly progress reports.• Coordination among team members of various departments such as engineering, administrative and financial.• Obtaining permit to Work at Height form client.• Closing out the project and handing over the project dossier to client.• Obtaining the Project Completion Certificate from client. Show less

• 

  National Development Consultants

  Sept 2012 - Mar 2015

  Worked during construction phase of EPC project Neelum Jhelum Hydal Power Plant having installed capacity of 969MW. There were 4 vertical Francis Turbines Units of Rated Output capacity 242.25MW each and Rated Head of 370m. Consultant consortium consisted of Montgomery Watson Harza (U.S), Norplan (Norway), National Development Consultants (Pakistan), Nespak (Pakistan), Associated Consulting Engineers (Pakistan). I worked on panel of NDC and my duties included:• Supervised manufacturing, installation, welding (Submerged Arc Welding) and Non Destructive Testing of 156 Penstock Segments covering 109m length and its Drainage and Dewatering System• Supervised installation, welding and NDT Testing of Draft Tube Liner consisting of 11 Sections, thickness 60mm.• Supervised installation, welding and NDT Testing of Draft Tube Bonneted Gates consisting of 4 lower sections, Flap Gate, U/S & D/S Bonnets and Access Pit Liner.• Supervised installation, welding and NDT Testing of Stay Ring (thickness 150mm, Material Q235) and Spiral Case (each comprising of 22 circular and 4 straight sections, Maximum internal Ф2.6m, Spiral Case Segment Thickness 50mm).• Supervised installation and welding of Pit Liner.• Supervised installation, welding and hydrostatic testing of S.S pipes (Austenitic TP 304) of ɸ up to 450mm and up to pressure 1.5 MPa for Unit Cooling Water Supply, Units and Tunnel Dewatering, Water Drainage System, Fire Fighting, Medium & Low Pressure Compressed Air System and HVAC. • Supervised commissioning of 25 Tons Gantry Crane (at Site C2).• Supervised the welding team during different welding positions (1G, 2G, 3G and 4G) and checked quality of welding by Non Destructive Tests (NDT) such as Ultrasonic Testing, Magnetic Particle Testing, Radiographic Testing and Dye Penetration Test, where needed. • Incoming Material Inspection.• Review of Contractor Document Submittals, such as Method Statements and Quality Reports. Show less Worked at Design and Contract documentation stage of 4320MW Hydal Power Plant, which is to be completed in 2 stages, with a Gross Head of 200m, 6 vertical Francis Turbine Units of 360MW each will be installed at each stage. Consultant consortium consisted of Joint Venture of Nippon Koei (Japan), Dolsar (Turkey), National Development Consultants (Pakistan), Development and Management Consultants (Pakistan), Pakistan Engineering Services (PES). I worked on panel of NDC and my duties included:• Planning of Dam, Power House and Appurtenant Structures using MS Project.• Costing of HVAC System.• Designing of Cooling Water System.• Designing of Drainage and Dewatering System.• Designing of High Pressure and Low Pressure Compressed Air System. • Proposing dismantle methodology and costing of package for dismantling of suspension bridges at Kandia and Largani. Show less

  • Mechanical Engineer

    Oct 2013 - Mar 2015

  • Planning and Costing Engineer

    Sept 2012 - Oct 2013
• 

  Pakistan Engineering Services (Pvt.) Ltd

  Mar 2015 - Dec 2019

  Assistant Resident Engineer

  Worked during construction phase of EPC Project Patrind Hydro-Power Plant having installed capacity of 150 MW. There were 3 vertical Francis turbine Units of Rated Output capacity 50MW each and Rated Head of 107m. K-Water of Korea was the client and Daewoo Engineering and Construction Company was the Contractor. I worked on panel of Owner’s Engineer Pakistan Engineering Services (PES) and my duties included:• To conduct technical and managerial meetings with the concerned departments of Contractor, Sub-Contractors and Government Departments.• Assist HSE Team in implementation of safe work during construction, installation, testing and commissioning. • Verifying the physical measurements, evaluation of work done and processing of Interim Payment Certificates (IPC) in accordance with approved milestone as per EPC Contract.• Preparation and evaluation of Variation Orders (VO’s), Extension of Time (EOT’s) and Monthly Statements (MO’s) as per Contract provisions.• Implementation of approved Construction Schedule and preparation of Recovery Plans to overcome the delays.• Preparation of Annual, Quarterly and Monthly progress reports.• Preparation of Minutes of Meetings (MOM’s) and Site Visit Reports.• Issuance of Non-Conformance Reports, Site Memos and Technical Letters as per Contract.• Review of Work Procedures / Method Statements proposed by the Contractor.• Review and implementation of Project Quality Plan.• Coordination with Design Team and propose changes in design as per site requirements.• Approve Construction Drawings, Shop Drawings and As-Built Drawings.• Monitoring and managing of site progress as per approved work plan to achieve target on time.• Supervising complete installation of Francis Turbine and Generator.• Supervising complete commissioning of Francis Turbine and Generator. Show less

• 

  Qatar Engineering & Construction Company W.L.L

  Dec 2019 - Dec 2020

  Planning Engineer

  Working at Turn Around 2020, Oryx GTL is a synthetic fuel plant based in Ras Laffan Industrial City (RLIC) and is owned by Qatar Petroleum (51%) and Sasol (49%). It uses Gas To Liquid technology (Fischer-Tropsch Process) to convert natural gas into diesel and naphtha. Oryx GTL capacity is 32,441 barrels/day. I am working for QCON as a Planning Engineer. QCON’s scope has static equipment such as Shell Type Heat Exchangers, Plate Type Heat Exchangers, Effluent Exchangers (Fin Fans) and Vessels such as Drums, Tanks, Columns and Reactors. My duties include:• Understand work scope, quantity and familiar with logical sequences of construction disciplines. Breakdown the activities according to Area/Unit or Equipment Handover dates.• Planning and scheduling of Shutdown/Turnaround activities using Primavera-P6.• Identify the required resources to complete the work (manpower, contracting services, equipment, tooling & facilities.)• Efficiently organize the site / facilities in order to meet an agreed plan /program of deadlines.• Prepare monitoring sheet of Shutdown/Turnaround activities for progress updating.• Prepare S-curve to monitor daily progress during execution and post shutdown periods.• Monitor day-to-day work progress and to prepare DPR including (Manpower, Equipment, Daily Highlights and issues).• Prepare Daily Status report of on-going activities.• Prepare 3 Days look ahead plan and share with site team to avoid any lag.• Participate in all meetings (i.e schedule review meeting, progress meeting, coordination meeting, and so on).• Perform other duties and responsibilities as may be assigned from time to time.• Highlighting areas of concern.• Preparing the Daily Hand-Over Report for night shift.• Acting as liaison between Planning, Execution and Quality Departments. Show less

• 

  Abdullah A. Al-Barrak & Son Co.

  Dec 2020 - now

  Planning Engineer

  Worked on the Hydro-jetting and Super Sucker LFC contracts for Haradh Manifolds. Prepared schedule for the 30” pipeline replacement project at Hawaiyah Gas Plant.Worked during the 39 days shutdown of HPDGA (High Pressure Di-Glycol Amine) Unit of Shedgum Gas Plant. Scope was 20 Heat Exchangers, 40 Drums, 4 Columns and 4 Sumps. My duties during the Shutdown included but not limited to:• Preparing resource and cost loaded schedule• Ensuring implementation of approved baseline schedule.• Providing work front to execution team.• Updating and disseminating reports to stake holders.• Holding meeting with the client. • Preparing Boxup Certificates, Job Completion Certificates (JCC) and Invoicing. Show less