Mohammad Mustak Ahmad

Experience

• 

  Elmatics Engineering India Ltd

  Sept 2003 - Feb 2005

  Trainee Engineer - Instrument

  • Responsibilities. Trainee Engineer Instrument charges for the execution all Instrumentation Activities, responsible for value engineering cost control and contracting strategy.• Ensure project completion within allocated budget and stipulated time frame identify lead period for long delivery materials, plant equipment etc. • Development and review management information system including executive summary on progress status for all areas of works.• Good Exposure to DCS systems, experience on DCS related troubleshooting, Diagnosis of Problems. • Checked operation of DCS equipment versus Programmed information program troubleshoots, and repair problems diagnosed. • Used PLC interface and documents to troubleshoot plant shutdown systems. • Familiar with mode bus poling and Pinging of Wi-Lan OD and PCD check all Parameter through PDO server Shurooq Systems.• Checked and modify workstation setup in order to ensure network performance and stability. • Trace and report network hardware faults, repair and provide backup/replacement Show less

• 

  Kharafi National

  Jul 2005 - Oct 2006

  Engineer - Instrumentation

  • Responsibilities. Preparation of Documents, Installation, Calibration, Cable Termination, Loop Checking, and Punch list Coordination.• Coordinated with Client, Vendor, Construction and Process engineering document. • Collected the all as built Drawing and Vender document. • Collected all types of Drawing like P&ID, Cable Try layout , Instrument location layout, JB layout ect. • Penal Termination Drawing and JB Termination Drawing.• Preparation of Master Database as per Instrument Tag List, I/O List, Loops drawings, Connection diagrams.• Instrument Set point & Alarm management. • Verify the all Instruments and collecting the Punch list, submitted to particular Team Leader. • Man power arranging. Work within department and Project procedure and to recognize engineering standard.• System and Sub system boundary mark – up on the P&ID based on the sequence of commissioning flow with the co-ordination of process and other discipline engineers. • Held the responsibility for pre-commissioning activities involving process and fire & gas loops.• Coordinated between KOC operation maintenance team and Fluor pre-commissioning team to ensure efficient loop checking.• Coordinated with other duties as assigned• Maintain standards that are based on applicable international standards and statutory requirements. • Technically competent in own discipline and actively maintains own competence according to standards and pursues continuous professional development.• Perform Quality Assurance, ensuring that the project teams are fully compliant with requirements of the Project Quality Plan and Company IMS Procedures.• Familiarity with project work processes such as per reviews, quality assurance, and risk assessment/management. • Ensure full compliance with the project’s health, safety and environmental management plans, procedures and processes. Show less

• 

  Consolidated Contractors International Company

  Jul 2007 - Jul 2008

  Engineer - Instrumentation

  • Responsibilities. Installation and Functional inspection of OTN open transport network and PCS. • Involved in installation & Commissioning of Emerson FCS System Delta V DCS and PLC / IPS SIS safeguarding System.• Installation & commissioning of Fire & Gas Panel, H2S and smoke detection system. • Installation & commissioning of UPs, switchgear panels & Earthling system. • Auditing- internal and external, and follow up of Corrective Actions.• Overall instrumentation and Telecom work control, Supervision and implementation of contract quality and technical requirements; resolution of quality problems; preparation and maintain of contract quality records.• Responsible to make site decisions were required to enable the project to move forward. • Reviewing vendor drawings and data sheets, general arrangement and Isometrics. • Managing contractors’ performance and communicating project performance. • Ensuring manuals and other instructions for projects are distributed to the appropriate departments. • Defining work plans, work breakdown structures and milestones etc. to be performed. • Preparing plan, networks, resource plans, schedules and progress monitoring of projects in oil and gas industry. • Responsible to ensure that site engineers have up to date Instrument drawings and redlines/as built. • Responsible to Ensure that Project HSE is adhere to and implemented. • Manpower Estimation and supervision of Contractors. • Co-ordination and kick off meeting with asset owner Team Player along with good Analytical, Relational, Decisive and Communication skills. Show less

• 

  KBR/Energo Engineering

  Nov 2008 - Jun 2011

  Engineer - Instrumentation

  • Responsibilities. Executed the project construction activities (or part thereof), in line with the project specifications, the scope of work, schedule, and client requirements. • Leaded a team of construction superintendents, and manages the construction subcontractor's construction managers in completing the subcontracted works, while maintaining the required HSE and Quality standards. • Represents KBR during the execution of the construction works. • Monitored and appraises instrumentation Fabrication and Construction work compliance with DEP. • Reviewed and understand the project HSE and Quality requirement, Scope of work, specifications, and project overall schedule. • Ensures proper and timely handover of systems/subsystems to commissioning teams, and provide assistance as required. • Assess with the QC & HSE managers, the status of Construction Quality & HSE ensure timely closures of corrective actions. • Ensure that completed systems are supported by the required as-built documentation and any outstanding items are punch listed.• Safeguard the position of the Company under the contract and ensure records are maintained for this purpose.• To monitor contractors' activities with respect to quality performance.• Liaising with asset owner and contractor personnel in resolving construction and commissioning related issues and punch points.• Strict compliance with Health, Safety, and Environment (HSE) norms. Performing all job tasks in a safe, legally compliant and environmentally sound manner and ensuring that contractors under project supervision comply with plant safety standards.• Preparation of work method statements, Scope of Work, instruments installation, calibration. • Pre-commissioning and commissioning procedures, online modifications /Revamping or ESD, DCS. • Analyzers and F&G loops. Co-ordination & Follow-up with different vendors, Redlining, markup and reviewing of Drawings, spare parts, purchase requisition. Show less

• 

  Integral Services Co. for Mechanical Contracting & Instrumentation W.L.L

  Dec 2011 - Jan 2015

  • Review and forward Construction Technical Query (CTQ) raises by Site Supervisor and forward to client.• Manage & Monitor all the Construction Materials flow.• Coordinated with Client Warehouse Manager for releasing of materials for Installation & Calibration.• Preparation of Method statements (MS) & Job Safety Analysis (JSA).• Close Coordination with other disciplines like piping and Mechanical for avoiding any kind of delays to start the Instrument Tie-In Activities.• Various Coordination’s with Subcontractors and Third Parties. • Monitor, Supervise & Raise Inspections for all the Instrumentation scope.• Provide support to Cost & Contract department. • Commenting / Technical advice on design/drawings/specification forwarded by Facilities Engineering or Project department for final approvals.• Scheduling & executing erection, testing &commissioning activity of instruments in coordination with operation and other respective division.• Co-ordinating with third party for functional test and calibration wherever third party calibration certification required.• Organize weekly meeting with the supervisors and engineer to maintain the progress. • Review daily activity reports and submit it to client to main daily electronic log file. Show less • Familiar with material inspection in store and Warehouse, paper evaluation, and Commercial Bid selection.• Familiar with creating or changing the P.O. Description as per Instrument specifications and ordering information.• Familiar of making Task Instructions according to the Field condition and Type of process & Instruments.• Installing hardware instrumentation, loop check, pre commissioning, commissioning with DCS, PLC, & SCADA System• Involved in SAT for all type of systems such as DCS, SCADA, Foxboro,WONDERWARE, FMC SYSTEM, ESD,PLC,F&G, etc.• Knowledge about Bently Nevada Vibration Monitoring System, SAAB Rosemount Tank Radar Level Monitoring System and Wonderware SCADA HMI.• RCA’s (Root Cause Analysis) for equipment and spares failures follow up and documentation.• Troubleshooting of field instruments and Allen Bradley SLC 5/04, PLC 5/40 and Control Logix 5555 series.• Support operation team for commissioning activities like motor solo tests, pump load tests, plant start-up, shutdown and abnormal conditions.• Technical Support for Operation and Maintenance team to keep plant wide control system and instrumentation in healthy condition. Show less

  • Engineer - Instrumentation

    May 2012 - Jan 2015

  • Engineer - Instrumentation

    Dec 2011 - May 2012
• 

  FDH (JV) thru’ I.S.C.O

  Feb 2015 - Dec 2017

  Engineer - Instrumentation

  • Establish and maintain an excellent business relationship with the client.• Develop and enhance effective communications and relationships across the project so that there is a good network within the team and a strong sense of teamwork and trust.• Manage, direct and coordinate field construction activities in accordance with the requirements of the Project Schedule and associated Construction Work Packages.• Raising & Managing all Work Permits/ PTW (Permit to Work) for all the Construction Activities.• Leaded a Team of 8 No’s of Construction Supervisor, more than 200 direct manpower and collects status and progress of each instruments and report to client.• Fiber Optic Cables & all related inspections including OTDR & Power Meter tests. • Coordinated & Attended Meetings with Client’s Mechanical Handover/ System Turnover Departments and deliver the Construction, Inspection and Handover Status.• Performed basic project engineering functions involving monitoring of progress, preparation of procedures, documentation of communications and meetings, and identification/evaluation of project issues and problems.• Effectively managed support creation and coordination of project plans and schedules, and monitoring activities, progress and milestones against the plans, as well as providing early warning of potential slippage.• Giving weekly targets to Construction Supervisor & monitor the Construction Progress.• Deliver the daily/weekly/monthly progress reports to Project Control Department.• Prepared daily activity report (CDR) and Submitted to Client Planning department on daily basis.• Handle and Lead the entire Construction Completion Matrix for the Brown Field and Green Field Activities. Show less

• 

  TechnipFMC

  Dec 2017 - Nov 2018

  PMC Engineer – Instrumentation

  •Supervise and Monitor the Contractor’s site activities.•Oversee the construction and pre-commissioning activities for Fire & Gas Systems.•Administer the construction and pre-commissioning activities for Telecom & Security systems. •Guide Contractor for the construction and pre-commissioning activities of Suppression System.•Attending Walk-downs with KOC as per P&ID mark-ups and generate Punch-lists. •Liaising with KOC asset owner OTS & MPG-ll and EPC contractor personnel in resolving construction and commissioning related issues and punch points.•Review the Project documents/drawings related to the construction/interfaces•Supervise and Monitor the Contractor’s site activities related to Electrical/Instrumentation•Strict compliance of Health, Safety and Environment (HSE) norms. Performing all job tasks in a safe, legally compliant and environmentally sound manner and ensuring that contractors under project supervision comply with plant safety standards.•Issue and close out of work permits to ensure that the work is followed as per KOC HSE guidelines•Ensuring project activities of construction is carried out as per the contract requirements and applicable engineering standards approved by KOC.•Review of quality plans & quality procedures related to Quality assurance and quality control.•Job Monitoring and witness of test and inspection of all construction / field activities and co-ordination with KOC for clearance.•Inspection and clearance of field activities like cable laying, conduit/tray installation, instrument / JB installation, panel wiring and termination etc. as per approved documents. •Participated in Site acceptance test for FNG systems for field and Building Fire alarm systems and gas suppression systems.•Closely follow up for closing of punch items issued by us, KOC OTS and Maintenance Teams.•Issuing permits to Contractor/Sub-contractors. •Prepare SVV'S during HSE inspections Show less

• 

  Technip Energies

  Nov 2018 - Dec 2020

  Lead Instrumentation Engineer

  Lower Fars Heavy Oil Project; 930 Wells, 26 Substations and Pattern, Infield Satellite Stations, 7 OTSG with Steaming capacity 50000 kg/h, HAZOP HAZID, SIL, FAT, SAT, Cause & Effect, Control Narrative, Commissioning, Front End Engineering Design FEED, Consultant.Knowledge and experience of Production Operations particularly in, wells, Crude oil and Gas processing (Production/Injection Wells, Crude Oil Separation, Dehydration, Absorbers/Regeneration, Power Station, Utilities, Gas Compression, Flowlines, Cross over and Trunk pipelines) and related systems and in DCS/HMI control instrumentation.supervised the Pre-commissioning and Commissioning activities performed by Contractor and Subcontractors to ensure safe and on-time start-up of Systems/Area assigned to me.Review the Pre-commissioning, commissioning and Start-up procedures developed by Vendors, Contractor, and Sub-contractors.Prepare System based Commissioning sequences and handover schedule in consultation with Client Operations team.Coordinating with the Contractor Commissioning team and Client Operations team to ensure the safe and smooth execution of planned activities.Participate in the development of task risk evaluation/assessments and help Contractor to obtain Permit to Work from Client Operations team.Perform the conformity checks on multi-discipline Systems and Subsystems and generate punch lists.Witness and approve flushing/blowing, Pigging, Leak Testing and purging activities on Process and Utilities Systems.Participate in logic validation checks and test runs of rotating equipmentExecute the Commissioning activities on hydrocarbon systems in coordination with the client Operations team.Support control room operations during the Commissioning, Start-up and Performance Testing.Overall responsibility and ownership for Safety, Quality and Schedule of execution of Pre-commissioning and Commissioning activities for the assigned Area/Systems Show less