Cory Pearce

Experience

• 

  Honeywell

  Nov 2011 - Feb 2013

  Controls technician

   Undertook fault finding, programming, commissioning, maintenance and installation o fHoneywell control systems and instrumentation following all defined policies and procedures. Managed sub-contractor on Control related projects. Employed on Plant control device VSD and soft starters including Danfoss and ABB. Carried out electrical control wiring and panel building. Ably carried out PID Loop tuning and instrumentation calibration. Gained valuable experience in HART communicators and FLUKE 789 and 773 Process Meters. Show less

• 

  Oceaneering

  Feb 2013 - Mar 2014

  Electrical electrician

  Projects: Worked a 2:1 rotation on the Construction and Wet Commissioning of CSG Surface Equipmentbetween April 2013 and February 2014; and; from February 2013 to April 2013, worked on the assemblyand wiring of equipment at the Taroom and Dingo Gas Fields for QGC Undertook safe and timely hazardous area wiring and cabling and steel wire armour resinglanding for hazardous area. Performed PLC Control and panel building. Proficiently carried out connection and calibration of Ultrasonic flow-meters, pressuretransmitters, temperature sensors and high and low level limits. Executed connection of communication cabling and devices (RS485, RS232 MODBUS). Utilised HART communicators 475, FLUKE 789, 726 and 773 Process Meters. Show less

• 

  Electrix

  Apr 2014 - Dec 2014

  QA Electrical Inspector

  Undertook timely QA Testing and inspection; ably carried out HA Inspection; accuratelycompleted all relevant documentation. Forwarded Redline drawings implementation and submission to client. Oversaw RFI Implementation; forwarded QVD/ITR implementation and submission to client. Followed procedures and guidelines in document control and turnover. Utilised HART communicators 475, FLUKE 789, 726 and 773 Process Meters Undertook control panel wiring and testing and large cable terminations. Carried out project testing and QA inspections. Performed maintenance on automated conveyor systems. Safely executed grid earthing, punch list rectifications and bus duct installations and HVMotor/Pump cabling. Utilised HART communicators 475, FLUKE 789, 726 and 773 Process Meters. Show less

• 

  Bechtel Corporation

  Jan 2015 - Jan 2016

  Electrical and Istrumentation technician

  Project: Working a 28:7 FIFO rotation in the start- up and commissioning of the GLNG plant on CurtisIsland Carries out all work in accordance with OHS, client and organisational policies and standardoperating procedures; ensures JSA’s, SWIM’s and Permits to Work are in place beforecommencing tasks. Commissioning of Gas Turbines, Gas Compressors, Gas related Plant and water treatment Plant Performs calibrations, loop checking, function testing and troubleshooting instrumentation suchas flow, level, temperature and pressure transmitters. Analysers, Pneumatic valves andPositioners. Bearing monitoring systems , proximity , Vibration , speed sensors commissioning ( BentleyNevada ) Reads, interprets and follows P&ID's, data sheets, calibration reports, loop drawings, cause andeffects and supplier manuals. Fire and Gas instrumentation and systems commissioning Using Fluke 726 and a Piecal, tests RTD and Thermocouple in accordance with client data sheet. Utilises HART communicators 475, FLUKE 789, 726 and 773 Process Meters. Carries out logic testing on Allen Bradley RSlogix5000. Accountable for Pressure & Flow Transmitters, Level, EDS and Valve Loop simulation testing andITR/IDR Completion. Show less

• 

  GR Production Services

  Jan 2016 - now

  Electrical & Instrumentation Technician

   Carries out all work in accordance with OHS, client and organisational policies and standardoperating procedures; ensures JSA’s, SWIM’s and Permits to Work are in place beforecommencing tasks. Preform detailed Hazardous area electrical inspections and rectification in accordance withlatest standards Fault finding, PM, and routine CFT checks on GPF plant( TEGS, Compressors, Bently nevada, etc) Preform CRITICAL FUCTION CHECKS on well site and Plant safety systems High level of knowledge in Isolation and permitting systems. Performs , loop checking, function testing instrumentation such as flow, level, temperature andpressure transmitters., Pneumatic valves and Positioners. VSD programming, fault finding and replacement (Schenider and ABB) Reads, interprets and follows P&ID's, data sheets, calibration reports, loop drawings, cause andeffects and supplier manuals. Fault finding and calibration of Water treatment related Analysers and instrumentation. Using Fluke 726 and a Piecal, tests RTD and Thermocouple in accordance with client data sheet. Utilises HART communicators 475, FLUKE 789, 726 and 773 Process Meters. Accountable for Pressure & Flow Transmitters, Level, EDS and Valve Loop simulation testing andITR/IDR Completion. Programming and rectification of HMI/PLC and DCS systems . CMMS experience (Oracle, SAP) Show less