Arun G

Experience

• 

  Hindustan Petroleum Corporation Limited

  Jun 2014 - Aug 2014

  NDT Co-coordinator & Supervisor

   Leading a team of technical / manual personnel and maintain harmonious working relationships. Execution of site works with allotted manpower and equipment and reporting the performance and progress of the works to the site Management. Witnessing NDT Test on CDU unit in the Refinery. Allocating NDT Test according to Request for Inspection (RFI). Monitoring the NDT Test according to the NDT Procedure. Making a report for NDT Inspection. Monitoring Ultrasonic Thickness Gauge Measurement. Checking the Acceptant level of defect according to the ASME Section V. Compiling the report for Documentation. Good Knowledge on UT,MPI,DPI,RT Inspection of material before welding, cleanliness of materials, inspection of weld geometry-groove angle, root gap etc., Inspection of the finished weld for the size of the weld, amount of reinforcement and visual examination for defects such as center- line cracks and under cut.  Knowledge in reading Isometric Diagram. Show less

• 

  The Acetech MachineryComponents India PrivateLimited

  Aug 2014 - Apr 2015

  QC Inspector

   Checking weld joint preparation, fit up, alignment & dimensional inspection as per fabrication drawings. Process Owner for 7 Step Weld Excellence Project by Caterpillar. Conducting Weekly Audit for all work stations. Monitoring Welding Parameters as per WPS. Qualifying Welder according to the AWS D1.1/ Customer Specification. Preparing WPS and PQR according to AWS D1.1/Customer Specification. Witness of welder qualification test (WQT) and procedure qualification test. Review of Material and consumable Test Certificate (TC). Monitoring of consumable storage, handling, packing and drying temperature. Monitoring of Pre heat, Inter pass temperature and Inter pass cleaning as per WPS. Monitoring Surface Preparation & Abrasive materials. Monitoring Due Point & Relative Humidity before application of paint system.  Preparing of Inspection Test Plan for various Components. Witnessing MPT, DPT, UT and making a report. Familiar with Welding processes such as GTAW, SMAW, GMAW, and SAW. Witnessing Pneumatic Test in Tank Lines. Show less

• 

  Weatherford

  Jan 2015 - Dec 2015

  QA/QC Engineer

   Compilation of Mechanical Completion Dossier.(Check-sheets, Punch list, Manufacturing Data Records(MDR) and Factory Acceptance Certificates (FAT), Design Change Note, Site Technical Query, Non Conformance Report, Test Packs, Redline and As-Built, Engineering Data of all Disciplines) Co-ordinate with all MC Documentation activities of Engineering, Construction, QA/QC, Completion, Turnover and Commissioning Departments for all Disciplines. Preparation and finalization of sub-system wise Turnover Packs (Civil, Mechanical, Piping, Electrical, Instrumentation) for walk-down, with all relevant documents for the Mechanical Completion. Review of Factory Acceptance Certificate & Data Sheets. Review of document such as Welding Procedure Specifications (WPS), Procedure Qualification, Record (PQR)/ Welder and Welding operator certification/ Electrode issuance control procedure for subcontractors. Co-ordinating Client & Third Parties for Mechanical Completion Walk Down. Verifying& Closing of ITR’s and Punch List’s Witnessing Hydro Test and Pneumatic Test of Pipelines. Preparing a Punch list A, B, C during Line Walk. Line and Reinstatement Walk Down along with Third Party Inspector. As-Built drawing preparation as per site conditions. Review of Weld Material TractabilityRecord, Fit upInspection Record, Final weld visual inspection Report and NDT Reports. Perform Welding Inspection during fabrication, installation & construction of Structural & Piping. Monitoring Due Point & Relative Humidity before application of paint system. Monitoring Blasting Process & Cleanliness of Abrasive Particle.  Stage inspection of repair activities during fit up and welding and ensure the compliance with required standards. Knowledge in AWS B31.1& ASME Code / Customer Technical Specification. Show less

• 

  Power Mech Projects Limited

  Feb 2016 - Nov 2018

  Senior Quality Engineer

  Duties and Responsibilities: 1. Manage the performance of all QC activities in accordance with the project Quality plan and the project schedule.2. Qualifying WPS & PQR as per Client welding schedule.3. Carrying out the Alignment and Leveling, Inspection of Structures & Equipments.4. Assisting in preparation of Inspection Formats, Procedure and QCPs and submitting.5. Carryout P91 welding followed by induction machine Preheat, Post heat & PWHT. 6. Preparation daily Fit-up, Weld Visual Reports and Inspection Checklists.7. Preparing Job card for all welding and Stress Relieving activities.8. Check the cleanliness and roughness of blasted surface as per specification.9. Surveillance and record the ambient temperature condition before starting of paint application.10. Surveillance of mixing & thinning, Induction & Pot life, DFT,WFT values during application time.11. Surface Preparation and painting inspection of welded joint after Hydro Test.12. Weather Monitoring such as Temperature, Relative Humidity, Dew Point Temperature.13. Verification of Batch Certificate of Abrasive & Paint, Calibration certificate of all Instrument & equipment.14. Verify the qualification test of blaster and painter.15. Ensure mixing and thinning as per Manufacture DATA Sheet16. Ensure touch up works carried out fully in site piror to final inspection.17. Maintaining records of all work done, painting reports, RFI’s, Painting release note, Materials release report. 18. Controlling the NDT jobs as per Project specification and reviewing reports.19. Preparation of welder performance reports on Weekly basis.20. Witnessing Welder qualification along with Client.21. Prepare the Welder Performance Qualification Test Record and issue the welder ID card after acceptance of code requirement.22. Reviewing of PWHT chart & interpretation of RT flims.23. Walk down inspection of the piping and equipment and Preparing of Punch list for equipment & Piping. Show less

• 

  Kanooz Industrail Services

  Nov 2018 - Dec 2019

  QA/QC
• 

  Citadel Engineering Company

  Jan 2020 - now

  • Technical Operations Manager

    Feb 2022 - now

  • Multi Discipline Inspector

    Jan 2020 - Jan 2022