Experience

• 

  M/s. novatex limited,

  Sept 1999 - Oct 2000

  Power plant operator.

  As a Power Plant Operator. Worked in operation & maintenance, overhauling & trouble shooting of Plant & its auxiliaries, (Electrical & Mechanical).Operated & Worked on T.E.M Panels, Load Management System and PLC system based Panels & LV Switch Gears and Distribution.• DEUTZ MWM, Gas Engines (1.278 MW each 02 in Nos).• CAT-3512, Diesel Engines (01MW each 02 in No).• CAT-3406, Diesel Engine (296 KW).• (Total Plant Generation Capacity 5.5 MW Plant).

• 

  M/s. liberty energy limited,

  Oct 2000 - Apr 2001

  Shift incharge (power plant)

  As an Assistant Shift Incharge (Power Plant) Worked in complete plant erection & commissioning, my main area of concentration included Engine overhauling, trouble shooting, (Electrical & Mechanical), Operation & maintenance of plant with.• CAT-3516 G SITA Gas Engines 1005 KW each 03 in Nos.• CAT-3512 Diesel Engines CAT-3512 1075 KW each 03 in Nos.• Waste Heat recovery Steam Boilers 03 in Nos.• MV (11KV OCBs) change over, transformers and MV & LV Switch Gears and Distribution. ).• (Total Plant Generation Capacity 06 MW Plant). Show less

• 

  Yunus textile mills

  Apr 2001 - May 2003

  Shift engineer (power plant).

  As a Shift Engineer (Power Plant). Worked in complete plant erection& commissioning, my main area of concentration included Engine overhauling, trouble shooting, (Electrical & Mechanical), Operation & maintenance of plant with.• CAT-3516 G SITA (TERBERG TECHNIC 4EK3516 SERIES) 1005 KW each, 4 Nos.• GAS fired Boiler ECO FLAME (DDFC) 06 Ton/Hour• Waste Heat recovery Boiler (DDFC) 1.5 ton/Hour.02 in Nos.• AtlasCapco Screw type Compressors 5 in Nos. MODEL ZR-315.• (Total Plant Generation Capacity 04 MW Plant). Show less

• 

  Aga khan university hospital

  Apr 2003 - Feb 2008

  Shift incharge in self generation power plant,

  As a Shift Incharge in Self Generation Power Plant, (Total Plant Generation Capacity 05 MW Plant).Worked in complete plant erection & commissioning, main area of concentration included Cummins Gas / Diesel Engines Commissioning / Installation, Operation & Maintenance, overhauling, PPM, BDM & Troubleshooting of Plant, , (Electrical & Mechanical) of Associated Systems with,• Gas Engines, Cummins QSV 91(1.5 MW each) 02 in Nos.• Diesel Engines, Cummins KTA-50(1 MW each) 02 in Nos.• 11KV Switch Gears (ALSTOM) with Numerical Protection Relays MICOM.• DMC-100 Panels, Load Management System and LV Switch Gears and Distribution, • Attended Various Training Courses. Show less

• 

  Al tuwairqi group

  Feb 2008 - Sept 2011

  Site engineer (power plant)

  35 MW Kawasaki Combined Cycle Duel Fuel Power Plant. (Working since Ground Breaking Ceremony of Plant).• Complete working on P&IDs, PFDs, Device location, interconnection, control logics, Single and three line diagrams. (Standards: IEC/ISO/NEMA).• Detailed Working on Plant Load Calculation, Fault Levels, 11Kv, 6.6kV, 400V MCC, Protection relays, Circuit breakers, VFDs and Soft starters, Emergency Diesel generator etc. Power, Distribution &Lighting Transformers.• Selection and Sizing of MV, LV Cable by Considering Temperature De-rating, Distances and Load. Cables layiny, MV & LV Cable Termination.• Equipment Installation / Placement, Grouting & Levelling.• Cooling Tower, (Waste Heat Recovery Steam Generator or Boiler) HRSG. • Soil Resistivity Tests, Meggering, and Grounding & Lightening and Lighting system.• Cable Tray selection, installation, Conduiting, Ducts and Cable Routes.• Plant Pipes Racks Structures & Piping and other mechanical works.PLANT DETAILS:-• Kawasaki GPB70 Gas Turbines (6.5 MW) each 04 Nos (02 Gas & 02 Duel Fuel Gas / Diesel).• AustCold Fuel Gas Compressors (4504m3 / h) 03 in Nos. with Toshiba VFDs. • Areva T&D 11KV Switchgears & Numerical Protection Relays MICOM Series, P143, P142 & P632 (Generator, Feeder & Transformer Protections)• MCC Panels TIPECO KSA (Intelligent Module Siemens SIMOCODE PRO V (Low Voltage Motor Control Centre) • CAT-D3512B Diesel Engine Generator (1600 KVA)• NGR Panels (AVRTON – USA) 5Amp/1270 Ohms, Neutral Panels (AREVA T&D) & RMU (Ring Main Unit) Merlin Gern 630 Amps/11KV. TECHNICAL TRAININGS: • 10 Days Training of Intelligent Module Siemens SIMOCODE PRO V, Soft Starters 3RW44 and FAT of MCCs Panels at TIPCO Dammam KSA. (Subsidiary of Altuwairqi Group of Companies KSA).• 03 Days Training & FAT of 11KV Switchgears & Numerical Protection Relays MICOM Series, P143, P142 & P632 (Generator, Feeder & Transformer Protections) and there Functions at Areva T&D S.I.T.E. Karachi, Pakistan. Show less

• 

  K-electric

  Sept 2011 - Apr 2015

  Generation engineer

  As a Generation Engineer in 175 MW Power Plant, (Gas Turbines and Gas Generators) Main area of concentration is Operation & Maintenance, PPM, BDM & Troubleshooting of Plant, (Electrical & Mechanical) with,• Gas Turbines. Hitachi, PG 5341, (21.180 MW) each 04 Nos (02 Gas & 02 Duel Fuel Gas / Diesel).• Gas Engines, Jenbacher – J 620 GS E01 (2.807 MW each) 32 in Nos.Direct to plant operators on the operation of all plant equipment in a safe, reliable and efficient manner in accordance with standards, environmental restrictions, original equipment manufacturers recommendations and Standard Operating Procedures• ensure the continuous operation to achieve the optimum efficiency without compromising safety, plant availability and reliability. •Ensures Operation Department Standard Operating Procedures are followed including lock and tag out procedures. • Responsible to oversee that all emergency start up and shutdown procedures are followed • to ensure that plant and all equipment are run efficiently and safely. Supervise troubleshooting, diagnosis and rectification of faults. • Analyze plant operating problems and coordinates solutions with other operating Shifts Maintenance Departments without compromising safety, plant availability and reliability • Ensures daily, weekly and monthly reports and logs are maintained • Evaluates the performance of subordinates. Organizing routine servicing schedules, Allocating work to a team of fitters, Checking and calibrating instruments to make sure they are accurate. Carrying out quality inspections, responding immediately to equipment breakdowns, fixing faults or arranging for replacements to be installed, keeping managers informed of progress. Organizing teams to make sure 24-hour cover is available. Ensure planning and scheduling of maintenance operations, looking for the optimum use of resources, equipment availability and maintenance cost, HSEQ compliance working with Permit to Work System (SAP). Show less

• 

  Descon power solution (pvt) limited. pakistan

  Mar 2015 - Mar 2019

  Plant manager-wind (operation & maintenance),

  Responsible for Wind Power Generation, Operation & Maintenance, PPM, BDM & Troubleshooting of (Electrical & Mechanical) with all equipments of the Wind Power Plants, 132KV Grid Stations, Power Trafo, 22KV/132KV Switchgears, RMU’s, Battery banks, Capacitor Banks, A.C/D.C control Panels, Telecommunication System and EDGs.• WTGs ( Nordex Germany),132 KV Grid Stations with SCADA control and GIS for Power switch gears.• Electrical equipment installed with Protecting equipment consist of :2.8 MVA Generator Step-up Units (0.6kv/22kv), 4-Way Ring main units, 22 KV VCBs, 40/50 MVA Power Trafos (22kv/132kv), 132 KV AIS / GIS Grid system.Responsible for all operation and maintenance and administrative functions for the efficient, economical and safe operation of Plant equipment, capital equipment and project work force. Sharing and implementing Company vision of O&M Service and policies. Ensuring high standards of O&M service quality and fulfillment of guarantees. Managing all areas of responsibility consistent with site procedures to fulfill the O&M Agreement, owner's plan of operations, governmental requirements and good utility practices. Establish Operation and Maintenance (O&M) plant objectives and processes. Oversee coordination of plant electrical loading with local utility according to Grid and distribution Code. Develop and maintain plant safety programs. Develop preventive maintenance programs and annual maintenance schedules. Coordinate daily activities and maintenance inspections of plant machinery. Analyze production reports, daily log, maintenance requests and machinery log. Manage materials and inventory in a cost-effective manner. Monitor and analyze plant performance on a continuous basis.Deal with appropriate government agencies concerning safety, environment, operation, and personnel issues. Purchase and control of material.Establish and maintain training programs to assure that the plant is operated serviced and maintained efficiently and safety. Show less

• 

  Orient energy systems pvt. ltd.

  Mar 2019 - Nov 2019

  Assistant general manager-wind energy

  As a Assistant General Manager-Wind Energy, oversee the systems that generate and distribute electric power and manage all wind plant employees, contractors, and equipment support teams, responsible for insuring the smooth operation and maintenance of wind plant activities.Collection system: Siemens Gamesa G114 2.0 MW Wind Turbines and electric equipment’s like WTG Transformer (GSU). Substation control & protection panels with EBOP SCADA panels, MV Panels, Capacitor Panels, AC/DC Panels, Telecom panels, Energy metering panels and battery banks, Auxiliary transformers and Emergency diesel generator, 132 kV Switch Yard (GIS), earthing, lightning & firefighting protection system, Gantry towers, GIS, Bus bars, CT, PT, Breakers, Power transformers, Grounding transformers, Instrument transformers, CVT, Surge arrestors and Capacitor Bank. Buildings earthing system, Lighting System, CCTV, firefighting, fire Alarm and HVAC System.Implement quality procedure, inspections, test plan checklist and documentation. Getting clear understanding of scope of work from contract. Co-ordination with client, contractors and sub-contractors. Implement & enforce all company policies, procedures and practices. Monitor and supervise all the O&M activities of Wind Farm ensure compliance with approved procedure, specifications, industry standards and drawings. Team management. Documentation and Coordination with Client. •Provide technical support to wind field customers, employees, or subcontractors .•Order parts, tools, or equipment needed to maintain, restore, or improve wind field operations. •Recruit or select wind operations employees, contractors, or subcontractors. • Establish goals, objectives, or priorities for wind field operations, including repairs or preventive maintenance.• Prepare wind field operational budgets.• Develop relationships and communicate with customers, developers, land owners, authorities, utility representatives, or residents. Show less

• 

  Descon power solutions (pvt) ltd.

  Dec 2020 - now

  Plant manager

  Responsible for Wind Power Generation, Operation & Maintenance, PPM, BDM & Troubleshooting of (Electrical & Mechanical) with all equipments of the Wind Power Plants, 132KV Grid Stations, Power Trafo, 22KV/132KV Switchgears, RMU’s, Battery banks, Capacitor Banks, A.C/D.C control Panels, Telecommunication System and EDGs.• WTGs ( Nordex Germany),132 KV Grid Stations with SCADA control and GIS for Power switch gears.• Electrical equipment installed with Protecting equipment consist of :2.8 MVA Generator Step-up Units (0.6kv/22kv), 4-Way Ring main units, 22 KV VCBs, 40/50 MVA Power Trafos (22kv/132kv), 132 KV AIS / GIS Grid system.Responsible for all operation and maintenance and administrative functions for the efficient, economical and safe operation of Plant equipment, capital equipment and project work force. Sharing and implementing Company vision of O&M Service and policies. Ensuring high standards of O&M service quality and fulfillment of guarantees. Managing all areas of responsibility consistent with site procedures to fulfill the O&M Agreement, owner's plan of operations, governmental requirements and good utility practices.Establish Operation and Maintenance (O&M) plant objectives and processes. Oversee coordination of plant electrical loading with local utility according to Grid and distribution Code. Develop and maintain plant safety programs. Develop preventive maintenance programs and annual maintenance schedules. Coordinate daily activities and maintenance inspections of plant machinery. Analyze production reports, daily log, maintenance requests and machinery log. Manage materials and inventory in a cost-effective manner. Monitor and analyze plant performance on a continuous basis.Deal with appropriate government agencies concerning safety, environment, operation, and personnel issues. Purchase and control of material.Establish and maintain training programs to assure that the plant is operated serviced and maintained efficiently and safety. Show less