Kamaruzaman (Man Spek)

Experience

• 

  Duke Energy Corporation

  Jul 2001 - Nov 2001

  Coating Inspector - Campbell Asia Pacific Sdn Bhd.

  ---Tasmania Natural Gas Project (TNGP)---I.D Lining Application=Monitor ID surface preparation=Measure wet film thickness of coating, monitor coating for sags, drips and other defects.=Measure dry film thickness of ID coating and final inspection of internal pipe surface.=Witness pinhole tests, strip tests, bond test and flexibility test.=Monitor tests for completeness of cure.=Monitor ID cutback and verify marking and stenciling information and location, verification. Fusion Bonded Epoxy Application=Monitor surface preparation and visual comparison of cleanliness. =Monitor acid dwell time, acid concentration and rinse conductivity, monitor chloride level.=In line process check on coating temperature, line speed, quench and coating cure.=Witness coating test equipment calibration (Holiday detector).=Monitor the coating repairs (2 part epoxy repair) and measure the DFT and cut back length.Concrete Weight Coating Compression Type Application=Verify material as specified wire type, aggregate mix and epoxy adhesive.=Monitor weighing of coated joints, OD measurement and final inspection.=Monitor polyethylene wrapping and concrete repairs.Anode Installation=Monitor installation weld procedure and bond cable connection.=Monitor anode positioning and electrical connection.=Monitor anode coating and FBE repairs and etc. Show less

• 

  Phillips Petroleum Supply Ltd

  Dec 2001 - Feb 2002

  Coating Inspector - Campbell Asia Pacific Sdn Bhd.

  ---Bayu Undan Project---Monitoring and inspection on 3LPP and FBE coating for line pipe. Ensuring coating process carried out by contractor according procedure, code, and standard and client specification. Also witnessed on site, repair for coating damage and lab testing which includes Cathodic Disbondment, hot water, impact test, adhesion / peeling test, differential scanning calorimeter and hardness test Monitor on load-out activity.

• 

  Nam Con Son Pipeline Co.

  Apr 2002 - Jul 2002

  Logistic Inspector - Moody international Malaysia

  ---Nam Con Son ,Vietnam Project---Daily monitoring the load out activities. Responsible to identify and inspection as followed approved procedure, and specification. Responsible for Q.C matter as coating inspector. Ensure all pipes in good condition and lease with client pertaining to load out pipes as per plan. Also monitoring safety conditions and requirements during load out progress.

• 

  Woodside Energy

  Aug 2002 - Mar 2003

  Coating Inspector - Campbell and Associates Pte Limited / BIE.

  ---Trunkline System Expansion Project---Monitoring and inspections on Internal Coating, Asphalt Enamel Coating, Concrete Weight Coating and Anode Installation for 30’’ and 42’’ OD linepipes. Ensuring coating process carried out by contractor in accordance to the client’s code,standard and specification.Also witnessed on lab test and site testing such as peel/bond test ,pinhole, strip, flexibility, impact test, concrete strength and water immersion test and also DFT and WFT measurement. Also monitor load in and load out activities. Reviewed and verified inspection and production reports. Show less

• 

  Kurvers/PFD/TCO

  Aug 2003 - Oct 2003

  Coating Inspector - Moody International (M) Sdn Bhd

  ---Gas Export Expansion Project---Monitoring inspection on Dual Layer Fusion Bonded Epoxy and Bend Coating. Be familiar with coating procedures and specification. Ensuring the coating process and related activities carried out in accordance procedures and specification. Witnessed lab on lab testing and production test, such adhesion test, impact test, hardness test, cathodic disbonding test, flexibility test and etc.Also monitor load in and load out activities .Reviewed all production and inspection report submitted by contractor. Show less

• 

  Sumitomo Corporation

  Dec 2003 - Dec 2004

  Coating Inspector - Moody International (M) Sdn Bhd

  ---SCP Pipeline Project (South Caucasus Pipeline)---Monitoring and inspection on 3LPE and Internal flow coating process for 46”, 42”&30”OD linepipes. Ensuring coating process carried out in accordance procedures, codes, standards and specifications. Witness on & off line testing, such as Adhesion peeling test, Air entrapment assessment test, Indentation test, DSC/Degree of cure, Cross-cut adhesion test, Cure test, CD test and WFT& DFT reading. Also monitor load in & load out progress and ensuring activities carried in accordance procedures and specification. Review all production inspection reports by contractor. Also monitor on safety conditions and requirements during coating process and related activities. Show less

• 

  Nippon Steel Corporation

  Feb 2005 - Apr 2005

  Coating Inspector - SGS –Petrotechnical Inspection (M) Sdn Bhd.

  ---Sakhalin 1 Project Phase 1 Development, EPC 2 – Pipelines and Export Terminal (Offshore) ---Monitored and inspections on FBE coating, Concrete Weight Coating and Anode Installation for 24’’ and 36’’ HIGH STRAIN pipes. Ensuring coating process and related activities carried out by contractor in accordance to the client’s codes, standards and specifications. Witnessing on the lab testing and site testing such as peel/bond test, pinhole, strip, flexibility, impact test, porosity test, cathodic disbondment test, hot water test, concrete strength and water absorption test, concrete density test. Review on inspection and production reports. Also monitoring safety conditions and requirements during coating process and related activities Show less

• 

  ILVA SpA

  Jun 2005 - Nov 2005

  Coating Inspector - Overseas Bechtel (Malaysia) Sdn, Bhd.

  ---Third Transmission Pipeline (Thailand) Project ---Monitoring and inspection on 3LPE , Internal flow, Anode Installation and Concrete Weight coating with 4 inch and 5 inch concrete thickness for 42” OD linepipes. Ensuring coating process carried out in accordance procedures, codes, standards and specifications. Witnessed on & off line testing ,such as Adhesion peeling test, Impact resistance test, Indentation test, Elongation test, Flexibility test, Cathodic disbonding test and for Internal flow testing are Pinhole test, Water test, Bend test, Cure test, Adhesion test, Stripping test and all test carried out on steel panel, WFT& DFT reading, concrete strength test, water absorption test, concrete density test and Also monitor load in & load out progress and ensuring activities carried in accordance procedures, codes, standards and specifications. Reviewed and verified all production inspection reports by contractor and also monitoring safety conditions and requirements during coating process and related activities. Show less

• 

  Saipem

  Dec 2005 - Mar 2006

  Coating Inspector - Itex/Saipem.Saipem Portugal Comercio Maritimo.

  ---Epc 2C / Epc 2F – Midstream Pipeline.Ras Laffan to Taweelah & Epc 2B – Sea lines Project---Monitoring and inspection on 3LPE , Internal flow, Anode Installation and Concrete Weight coating for 36 inch and 48 inch OD linepipes. Ensuring coating process carried out in accordance procedures, codes, standards and specifications. Witnessed on & off line testing ,such as Adhesion peeling test, Impact resistance test, Indentation test, Elongation test, Flexibility test, Cathodic disbonding test and for Internal flow testing are Pinhole test, Water test, Bend test, Cure test, Adhesion test, Stripping test and all test carried out on steel panel, WFT& DFT reading, concrete strength test, water absorption test, concrete density test and ensuring activities carried in accordance procedures, codes, standards and specifications. Reviewed and verified all production inspection reports by contractor. Monitor on the safety conditions and requirements during coating process and related activities. Show less

• 

  Woodside Energy

  May 2006 - May 2006

  Coating Inspector - Campbell and Associates Pte Limited

  ---Perseus Over Goodwny Project (POG) ---Monitoring and inspections on Polypropylene Insulation Coating (4LPP) for 10’’ OD + 3mm Cladded and Duplex Stainless steel linepipes with 45 mm coating thickness. Ensuring coating process carried out by contractor in accordance to the client’s code, standard and specification. Witness on the lab testing and site testing such as Adhesion test, DSC test, CD test and etc. Also monitor on safety conditions during coating process and related activities.

• 

  Shell

  Jun 2006 - Oct 2006

  Coating Inspector - Sarawak Shell Berhad / Sabah Shell Petroleum Company.

  --- Sabah Gas Conservation Project (SGCP), South Furious to Saint Joseph Project (SFSJ), F13 Shallow Clastic Ph 3 & Ph 4 Project---. .Monitoring and inspections on FBE coating, 3LPP Coating, Bends Coating, Asphalt Enamel Coating, Concrete Weight Coating and Anode Installation of various sizes of linepipes and bends pipes. Ensuring coating process and related activities carried out by contractor in accordance to the client’s codes, standards and specifications. Witnessing on the lab testing and site testing such as peel/bond test Elongation test, Indentation test, flexibility, impact test, porosity test, cathodic disbondment test, Differential Scanning Calorimeter test, hot water test, concrete strength and water absorption test, concrete density test. Review inspection and production reports. Monitor on safety conditions and requirements during coating process and related activities. Monitor on discharging and offloading activities. Show less

• 

  Shell

  Jan 2007 - Oct 2010

  Monitoring and inspections on, Asphalt Enamel Coating , Concrete Weight Coating , FBE coating , 3LPP Coating , Bends Coating, Glass Syntactic PU Thermal Insulation (GSPU), Anode Casting and Anode Installation Coating for 40 KM Deep water portion and 167 KM Shallow Water Portion for 18 inch line pipes and bends pipes. Ensuring coating process and related activities carried out by contractor in accordance to the client’s codes, standards and specifications. Witnessed on lab test and site testing such as peel/bond test Elongation test, Indentation test, flexibility, impact test, porosity test, cathodic disbondment test, Differential Scanning Calorimeter test, hot water test, concrete strength and water absorption test, concrete density test and for GSPU coating such as Thermal conductivity, Density, Compressive Strength, Tensile properties, Hardness, Water Ingress Cathodic Disbondment , Ring shear Test ,Adhesion Test and Hydrostatic Strength Test and also witnessing on Heat Shrink Sleeve (HSS) application. Review inspection and production reports. Monitor on safety conditions and requirements during coating process and related activities. Also monitor on discharging and offloading activities. Show less ---Saderi 14 Inch +3mm SS316L linepipes and Bends Pipes Project--. Monitoring and inspections on High Temperature Polypropylene Insulation Coating (5LPP) for 14’’ OD + 3mm Cladded linepipes and Bends pipes and Anode Double Plate preparations. Ensuring coating process carried out by contractor in accordance to the client’s codes, standards and specifications. Reviewed Contractor Inspection Test Plan (ITP) and General Procedures. Witness on the laboratory testing and site testing such as Adhesion test, DSC test, CD test, Impact test, porosity test, Elongation test, Indentation test, Shear test, Hot water immersion test and ECT. Also monitor on safety conditions during coating process and related activities Show less --- F13 Shallow Clastic Ph 3 & Ph 4 Project,F13 west to EPB11 28 Inch +3mm SS316 CRA Pipeline and Bends Project,G7 to M3DR-A 10 Inch + 3mm SS825 CRA pipeline and Bends Project,M3S to M3DR-A 10 Inch +3mm SS316 CRA pipeline and Bends Project---.Monitoring and inspections on FBE coating, 3LPP Coating, Bends Coating, Asphalt Enamel Coating, Concrete Weight Coating and Anode Installation of various sizes of linepipes and bends pipes. Ensuring coating process and related activities carried out by contractor in accordance to the client’s codes, standards and specifications. Witnessing on lab testing and site testing such as peel/bond test Elongation test, Indentation test, flexibility, impact test, porosity test, cathodic disbondment test, Differential Scanning Calorimeter test, hot water test, concrete strength and water absorption test, concrete density test and push off test. Review inspection and production reports. Monitor on safety conditions and requirements during coating process and related activities and monitoring on discharging and offloading activities. Show less

  • Coating Inspector - Gumusut Oil Export Pipeline (Shallow and Deep Water portion)

    Aug 2008 - Oct 2010

  • Coating Inspector - Sarawak Shell Berhad / Sabah Shell Petroleum Company.

    Dec 2007 - Jul 2008

  • Coating Inspector - Sarawak Shell Berhad / Sabah Shell Petroleum Company.

    Jan 2007 - Dec 2007
• 

  Shell

  Feb 2011 - Oct 2011

  Coating Inspector - Sarawak Shell Berhad / Sabah Shell Petroleum Company.

  Monitoring and inspections on, 3LPP Coating, Concrete Weight Coating, anode and Doublers plate Installation of line pipes and bends pipes. Ensuring coating process and related activities carried out by contractor in accordance to the client’s codes, standards and specifications. Witnessing on lab test and site testing such as peel/bond test Elongation test, Indentation test, flexibility, impact test, porosity test, cathodic disbondment test, Differential Scanning Calorimeter test, hot water test, concrete strength and water absorption test, concrete density test and push off test. Review inspection and production reports. Monitor on safety conditions and requirements during coating process and related activities. Also monitor on discharging and offloading activities Show less

• 

  Intertek

  Oct 2011 - Nov 2011

  Coating Inspector - Cuel Limited (Chevron Phase 41)

  Monitoring and inspections on FBE coated line pipe for 16’’ and 10’’ pipes. Ensuring coating process and related activities carried out by contractor in accordance to the client’s codes, standards and specifications. Also witnessed on lab test and site testing such as Adhesion test, flexibility, impact test, porosity test, cathodic disbondment test, hot water test, Review on inspection and production reports. Also monitor on safety conditions and requirements during coating process and related activities. Show less

• 

  SGS

  Dec 2011 - Oct 2012

  Coating Inspector - PTTEP – Bundled Phase Project. ( Bongkot 3J/Arthit 1E, Bongkot 3K)

  Monitoring and carried out inspections on 3LPE and 3LPP Coating, Bends Coating, Concrete Weight Coating and Anode Installation of various sizes of line pipe and bends pipe. Ensuring coating process and related activities carried out by contractor in accordance to the client’s codes, standards and specifications. Witnessing on the lab testing and site testing such as peel/bond test Elongation test, Indentation test, flexibility, impact test, porosity test, cathodic disbondment test, Differential Scanning Calorimeter test, hot water test, concrete strength and water absorption test, concrete density test. Reviewed and endorsed on inspection and production reports. Monitor on safety conditions and requirements during coating process and related activities. Also monitor on discharging and offloading activities. Show less

• 

  Nippon Steel & Sumikin Engineering Co., Ltd.

  Nov 2012 - Jan 2013

  Coating Inspector

  Monitoring and inspections on 3LPP Coating, Bends Coating, Concrete Weight Coating and Anode Installation of various sizes of line pipe and bends pipe. Ensuring coating process and related activities carried out by contractor in accordance to the client’s codes, standards and specifications. Witnessing on the lab test and site testing such as peel/bond test Elongation test, Indentation test, flexibility, impact test, porosity test, cathodic disbondment test, Differential Scanning Calorimeter test, hot water test, concrete strength and water absorption test, concrete density test. Reviewed and endorsed on inspection and production reports. Monitor on safety conditions and requirements during coating process and related activities. Also monitor on discharging and offloading activities. Show less

• 

  INPEX

  Jan 2013 - Jul 2015

  Coating Inspector - INPEX ICHTHYS- Gas Export Pipeline Project (GEP).

  Monitoring and inspection on Internal flow, Anode Installation and Concrete Weight coating, 3LPP Coating and Bend Coating for (885KM) 42 inch OD line pipes. Ensuring coating process carried out in accordance procedures, codes, standards and specifications. Witnessed on & off line testing ,such as Adhesion peeling test, Impact resistance test, Indentation test, Elongation test, Flexibility test, Cathodic disbondment test and for Internal flow testing are Pinhole test, Water test, Bend test, Cure test, Adhesion test, Stripping test and all test carried out on steel panel, WFT& DFT reading, concrete strength test, water absorption test, concrete density test and ensuring activities carried in accordance procedures, codes, standards and specifications. Also monitor on safety conditions and requirements during coating process and related activities. Show less

• 

  QAi Quality Assurance inc

  Dec 2016 - Sept 2017

  Coating Inspector - Sur De Texas To Tuxpan Project/ Trans Canada Pipeline Ltd
• 

  Bumitech global energy Sdn.Bhd

  Dec 2019 - Mar 2020

  Painting and coating inspector