Mamdouh Youssef

Experience

• 

  PGESCO.

  Apr 2002 - Feb 2003

  QC Welding Inspector

  • Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Interpretation of RT films and reviewing NDT results of PT, MT, and UT.• Understanding the application of the requirements of codes and standards for inspection activities.• Ensure Strict Compliance With : QA\QC Procedures\ Instructions & Drawings(New Revisions) &Applicable Code\Standards And Specification For Each Phase Of The Various Mechanical Construction Activity Of The Project During All The Stages And Progress Of Fabrication And Installation Processes , Such As : Welders Qualification Tests (WQT) & Fit Up & Tack Welding & Welding & Dimension Check & NDT Application And Evaluation &Heat Treatment & Equipment\Vessels Erection & Supports, Attachments, Accessories & Coating &Insulation …Etc• Monitor and follow up the required consumables for fabrication (welding electrodes and wires, argon and oxygen cylinders, painting materials, etc…) and requested the required consumables.• Review of Hydro test packages, Line checking and Punch listing.• Maintain all relevant updated Codes & Standards, Specification & Quality System documents• Participate in subcontractor kick-off and pre inspection meetings prior to start of any work.• PWHT Report and Chart Review• Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Daily quality issues resolution with Company and Contractor PMT (Quality, Engineering, and Construction). Show less

• 

  GUPCO

  Feb 2003 - Sept 2003

  QC Welding Inspector

  • Preparation and Qualification of WPS & PQR & WQT of Welders.• Supervise Welder Performance, Fit-up Check, Revision the Fabrication at Work Shop and sites with the Isometric Drawing & Dimension Check • Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Interpretation of RT films and reviewing NDT results of PT, MT, and UT.• Understanding the application of the requirements of codes and standards for inspection activities.• Ensure Strict Compliance With : QA\QC Procedures\ Instructions & Drawings(New Revisions) &Applicable Code\Standards And Specification For Each Phase Of The Various Mechanical Construction Activity Of The Project During All The Stages And Progress Of Fabrication And Installation Processes , Such As : Welders Qualification Tests (WQT) & Fit Up & Tack Welding & Welding & Dimension Check & NDT Application And Evaluation &Heat Treatment & Equipment\Vessels Erection & Supports, Attachments, Accessories & Coating &Insulation …Etc• Monitor and follow up the required consumables for fabrication (welding electrodes and wires, argon and oxygen cylinders, painting materials, etc…) and requested the required consumables.• Review of Hydro test packages, Line checking and Punch listing.• Maintain all relevant updated Codes & Standards, Specification & Quality System documents• Participate in subcontractor kick-off and pre inspection meetings prior to start of any work.• PWHT Report and Chart Review• Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Daily quality issues resolution with Company and Contractor PMT (Quality, Engineering, and Construction). Show less

• 

  Mahrokaht Syria

  Sept 2003 - May 2004

  Q.C. & N.D.T Engineer (Client Rep.).

  • • Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Interpretation of RT films and reviewing NDT results of PT, MT, and UT.• Understanding the application of the requirements of codes and standards for inspection activities.• Ensure Strict Compliance With : QA\QC Procedures\ Instructions & Drawings(New Revisions) &Applicable Code\Standards And Specification For Each Phase Of The Various Mechanical Construction Activity Of The Project During All The Stages And Progress Of Fabrication And Installation Processes , Such As : Welders Qualification Tests (WQT) & Fit Up & Tack Welding & Welding & Dimension Check & NDT Application And Evaluation &Heat Treatment & Equipment\Vessels Erection & Supports, Attachments, Accessories & Coating &Insulation …Etc• Monitor and follow up the required consumables for fabrication (welding electrodes and wires, argon and oxygen cylinders, painting materials, etc…) and requested the required consumables.• Review of Hydro test packages, Line checking and Punch listing.• Maintain all relevant updated Codes & Standards, Specification & Quality System documents• Participate in subcontractor kick-off and pre inspection meetings prior to start of any work.• PWHT Report and Chart Review• Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Daily quality issues resolution with Company and Contractor PMT (Quality, Engineering, and Construction). Show less

• 

  Orascom Construction PLC

  Jun 2004 - Aug 2004

  QC Welding Inspector

  • • Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Interpretation of RT films and reviewing NDT results of PT, MT, and UT.• Understanding the application of the requirements of codes and standards for inspection activities.• Ensure Strict Compliance With : QA\QC Procedures\ Instructions & Drawings(New Revisions) &Applicable Code\Standards And Specification For Each Phase Of The Various Mechanical Construction Activity Of The Project During All The Stages And Progress Of Fabrication And Installation Processes , Such As : Welders Qualification Tests (WQT) & Fit Up & Tack Welding & Welding & Dimension Check & NDT Application And Evaluation &Heat Treatment & Equipment\Vessels Erection & Supports, Attachments, Accessories & Coating &Insulation …Etc• Monitor and follow up the required consumables for fabrication (welding electrodes and wires, argon and oxygen cylinders, painting materials, etc…) and requested the required consumables.• Review of Hydro test packages, Line checking and Punch listing.• Maintain all relevant updated Codes & Standards, Specification & Quality System documents• Participate in subcontractor kick-off and pre inspection meetings prior to start of any work.• PWHT Report and Chart Review• Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Daily quality issues resolution with Company and Contractor PMT (Quality, Engineering, and Construction). Show less

• 

  STG International (Story trans gas)

  Jul 2004 - Jun 2006

  Senior QA/QC Welding Engineer

  • • Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Interpretation of RT films and reviewing NDT results of PT, MT, and UT.• Understanding the application of the requirements of codes and standards for inspection activities.• Ensure Strict Compliance With : QA\QC Procedures\ Instructions & Drawings(New Revisions) &Applicable Code\Standards And Specification For Each Phase Of The Various Mechanical Construction Activity Of The Project During All The Stages And Progress Of Fabrication And Installation Processes , Such As : Welders Qualification Tests (WQT) & Fit Up & Tack Welding & Welding & Dimension Check & NDT Application And Evaluation &Heat Treatment & Equipment\Vessels Erection & Supports, Attachments, Accessories & Coating &Insulation …Etc• Monitor and follow up the required consumables for fabrication (welding electrodes and wires, argon and oxygen cylinders, painting materials, etc…) and requested the required consumables.• Review of Hydro test packages, Line checking and Punch listing.• Maintain all relevant updated Codes & Standards, Specification & Quality System documents• Participate in subcontractor kick-off and pre inspection meetings prior to start of any work.• PWHT Report and Chart Review• Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Daily quality issues resolution with Company and Contractor PMT (Quality, Engineering, and Construction). Show less

• 

  Qatargas

  May 2006 - Sept 2007

  Sr. Welding QC Eng.

  • Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Interpretation of RT films and reviewing NDT results of PT, MT, and UT.• Understanding the application of the requirements of codes and standards for inspection activities.• Ensure Strict Compliance With : QA\QC Procedures\ Instructions & Drawings(New Revisions) &Applicable Code\Standards And Specification For Each Phase Of The Various Mechanical Construction Activity Of The Project During All The Stages And Progress Of Fabrication And Installation Processes , Such As : Welders Qualification Tests (WQT) & Fit Up & Tack Welding & Welding & Dimension Check & NDT Application And Evaluation &Heat Treatment & Equipment\Vessels Erection & Supports, Attachments, Accessories & Coating &Insulation …Etc• Monitor and follow up the required consumables for fabrication (welding electrodes and wires, argon and oxygen cylinders, painting materials, etc…) and requested the required consumables.• Review of Hydro test packages, Line checking and Punch listing.• Maintain all relevant updated Codes & Standards, Specification & Quality System documents• Participate in subcontractor kick-off and pre inspection meetings prior to start of any work.• PWHT Report and Chart Review• Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Daily quality issues resolution with Company and Contractor PMT (Quality, Engineering, and Construction). Show less

• 

  PETROBEL

  Oct 2007 - Nov 2008

  Welding QA/QC Engineer (Client Rep.).

  • Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Interpretation of RT films and reviewing NDT results of PT, MT, and UT.• Understanding the application of the requirements of codes and standards for inspection activities.• Ensure Strict Compliance With : QA\QC Procedures\ Instructions & Drawings(New Revisions) &Applicable Code\Standards And Specification For Each Phase Of The Various Mechanical Construction Activity Of The Project During All The Stages And Progress Of Fabrication And Installation Processes , Such As : Welders Qualification Tests (WQT) & Fit Up & Tack Welding & Welding & Dimension Check & NDT Application And Evaluation &Heat Treatment & Equipment\Vessels Erection & Supports, Attachments, Accessories & Coating &Insulation …Etc• Monitor and follow up the required consumables for fabrication (welding electrodes and wires, argon and oxygen cylinders, painting materials, etc…) and requested the required consumables.• Review of Hydro test packages, Line checking and Punch listing.• Maintain all relevant updated Codes & Standards, Specification & Quality System documents• Participate in subcontractor kick-off and pre inspection meetings prior to start of any work.• PWHT Report and Chart Review• Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Daily quality issues resolution with Company and Contractor PMT (Quality, Engineering, and Construction). Show less

• 

  Qatargas

  Dec 2008 - Feb 2009

  Test Pack Reviewer (Main Contractor)

  • Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Interpretation of RT films and reviewing NDT results of PT, MT, and UT.• Understanding the application of the requirements of codes and standards for inspection activities.• Ensure Strict Compliance With : QA\QC Procedures\ Instructions & Drawings(New Revisions) &Applicable Code\Standards And Specification For Each Phase Of The Various Mechanical Construction Activity Of The Project During All The Stages And Progress Of Fabrication And Installation Processes , Such As : Welders Qualification Tests (WQT) & Fit Up & Tack Welding & Welding & Dimension Check & NDT Application And Evaluation &Heat Treatment & Equipment\Vessels Erection & Supports, Attachments, Accessories & Coating &Insulation …Etc• Monitor and follow up the required consumables for fabrication (welding electrodes and wires, argon and oxygen cylinders, painting materials, etc…) and requested the required consumables.• Review of Hydro test packages, Line checking and Punch listing.• Maintain all relevant updated Codes & Standards, Specification & Quality System documents• Participate in subcontractor kick-off and pre inspection meetings prior to start of any work.• PWHT Report and Chart Review• Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Daily quality issues resolution with Company and Contractor PMT (Quality, Engineering, and Construction). Show less

• 

  ExxonMobil Rasgas Inc

  Mar 2009 - Feb 2010

  Senior Piping & Welding QA/QC (Client Rep.)

  • Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Interpretation of RT films and reviewing NDT results of PT, MT, and UT.• Understanding the application of the requirements of codes and standards for inspection activities.• Ensure Strict Compliance With : QA\QC Procedures\ Instructions & Drawings(New Revisions) &Applicable Code\Standards And Specification For Each Phase Of The Various Mechanical Construction Activity Of The Project During All The Stages And Progress Of Fabrication And Installation Processes , Such As : Welders Qualification Tests (WQT) & Fit Up & Tack Welding & Welding & Dimension Check & NDT Application And Evaluation &Heat Treatment & Equipment\Vessels Erection & Supports, Attachments, Accessories & Coating &Insulation …Etc• Monitor and follow up the required consumables for fabrication (welding electrodes and wires, argon and oxygen cylinders, painting materials, etc…) and requested the required consumables.• Review of Hydro test packages, Line checking and Punch listing.• Maintain all relevant updated Codes & Standards, Specification & Quality System documents• Participate in subcontractor kick-off and pre inspection meetings prior to start of any work.• PWHT Report and Chart Review• Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Daily quality issues resolution with Company and Contractor PMT (Quality, Engineering, and Construction Show less

• 

  QatarEnergy

  May 2010 - Jun 2010

  Senior QA/QC Welding / Piping Inspector (Client Rep)

  • Review of Hydro test packages, Line checking and Punch listing.• Maintain all relevant updated Codes & Standards, Specification & Quality System documents• Participate in subcontractor kick-off and pre inspection meetings prior to start of any work.• PWHT Report and Chart Review• Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Daily quality issues resolution with Company and Contractor PMT (Quality, Engineering, and Construction).• Ensure that that the latest revision of project documentation and drawings are being employed ,and all the documentation/drawings are approved for construction (AFC)• Interpretation of RT films and reviewing NDT results of PT, MT, and UT.• Understanding the application of the requirements of codes and standards for inspection activities.• Ensure Strict Compliance With : QA\QC Procedures\ Instructions & Drawings(New Revisions) &Applicable Code\Standards And Specification For Each Phase Of The Various Mechanical Construction Activity Of The Project During All The Stages And Progress Of Fabrication And Installation Processes , Such As : Welders Qualification Tests (WQT) & Fit Up & Tack Welding & Welding & Dimension Check & NDT Application And Evaluation &Heat Treatment & Equipment\Vessels Erection & Supports, Attachments, Accessories & Coating &Insulation …Etc• Monitor and follow up the required consumables for fabrication (welding electrodes and wires, argon and oxygen cylinders, painting materials, etc…) and requested the required consumables. Show less

• 

  SAFER Exploration & Production Operations Company

  Sept 2010 - May 2012

  QA/QC Manger

  • Reporting To Project Manager, Prepares Weekly Site Report Highlighting Weekly Accomplishments & Issues That Affect Product Quality.• Prepare The Required Procedure According The Requirements Of The Applicable Codes And Standers.• Promotes Safety Awareness And Safe Performance Among PMT, Including Contractor Personnel.• Witness for the Testing (Hydro, Leak, Pneumatic, Hydraulic) According To Project Specification.• Liaison/Interface with Completions Management Teams to Assist Quality System Handovers Through Mechanical Completion.• Performs Construction Assessments & Verifications, General Monitoring Of Construction Activities To Support Project Safety, Quality, Schedule, And Cost Objectives• Reviews And Assesses Contractor / Subcontractor QA/QC Plans And Procedures Including Test/Inspection Results.• Follow up the NCRs Close Out, Repair Percentage; Review the WPSs, PQRs and WPQs Certificates.• Review And Approved Method Contractor Statement And NDT Procedure, Make Sure The Codes And Standers Requirements Achieved. • Review The Final Work Packages Of The projects and signed off the mechanical completion certificates after close out all punch list.• Provides Technical Advice To PMT Engineering, Procurement, And Construction On Quality Issues. • Follow Up The Welding Inspectors And The QC Engineers And Making The Monthly Evaluation For All The Team Included Technicians (RT ,UT ,Painting)• Follow Up The Concession Requests ,Waivers Requests, Technical Inquires And Make The Required Register And Follow Up The Results During The Application • Attend The Meetings With Project Manager And Discus The Ways To Increase The Productivity Without Affecting On The Quality Level.• Review The Hand Over Package Of All Projects From All Subcontractor And Signed Off The Completion Certificates • Witness and monitor contractor /subcontractor site surveillance QA/QC activities. Show less

• 

  GUPCO

  Jun 2013 - Jan 2016

  QA/QC Manger

  .• Follow up the NCRs close out, repair percentage; review the WPSs, PQRs and WPQs certificates.• Review and approved method contractor statement and NDT procedure, make sure the codes and standers requirements achieved. • Review the final work packages of the projects and signed off the mechanical completion certificates after close out all punch list.• Provides technical advice to PMT engineering, procurement, and construction on quality issues. • Follow up the welding inspectors and the qc engineers and making the monthly evaluation for all the team included technicians (RT ,UT ,painting)• Follow up the concession requests ,waivers requests, technical inquires and make the required register and follow up the results during the application • Attend the meetings with project manager and discus the ways to increase the productivity without affecting on the quality level.• Review the hand over package of all projects from all subcontractor and signed off the completion certificates • Witness and monitor contractor /subcontractor site surveillance QA/QC activities.• Reporting to project manager, prepares weekly site report highlighting weekly accomplishments & issues that affect product quality.• Prepare the required procedure according the requirements of the applicable codes and standers.• Promotes safety awareness and safe performance among PMT, including contractor personnel.• Witness for the testing (hydro, leak, pneumatic, hydraulic) according to project specification.• Liaison/interface with completions management teams to assist quality system handovers through mechanical completion.• Performs construction assessments & verifications, general monitoring of construction activities to support project safety, quality, schedule, and cost objectives• Reviews and assesses contractor / subcontractor QA/QC plans and procedures including test/inspection results. Show less

• 

  ORYX GTL

  Feb 2016 - May 2016

  Senior QA/QC Welding and Plant Inspector (Client Rep.)

  • • Reported anomalies to the maintenance manager and assisted in the choice of the repair method of those Anomalies in promptly manner to avoid delay in production.• Carrying out external visual inspection prior to shut down for the static equipment's including pressure vessels, heat exchangers, coolers, columns, furnaces and stacks etc.• Carrying out initial, detailed and final internal visual inspection complemented with NDT examination for the static equipment's including pressure vessels, heat exchangers, coolers, columns, furnaces, and stacks etc.• Preparation of shutdown inspection advice notes (IANs) and inspection reports with all findings, abnormalities and repair recommendations.• Inspect any completed repairs, modifications and/or replacement.• Carries out regular external visual examinations complemented with NOT examination as required on Company equipment such as vessels, boilers, heat exchangers, piping according to Company established policies and procedures to ensure continued safe and reliable operation and assure operational mechanical integrity and issues inspection reports.• Inspects plant stationary equipment by entering into vessels, boilers and towers, during shutdowns, to check condition of equipment. Includes noting observations on cracks, pits, thinning and any other pattern of erosion, corrosion and other interior failure. Makes interpretations of findings, analyses for failure, prepares report and issues recommendation to supervisor.• Witness hydrostatic tests and pneumatic tests on pressure equipment, valves and pipelines as per code or Company specs.• Upon failures of equipment such as pumps and vessels, inspect material and assist in the preliminary failure assessments; prepare report and issue recommendations.• Retirement thickness calculation, corrosion rate calculation, remaining service life calculation for process piping systems and advising for any repairs/replacement/re-rating requirements. Show less

• 

  GUPCO

  Jun 2016 - now

  • Reviews and assesses contractor / subcontractor QA/QC plans and procedures including test/inspection results.• Follow up the NCRs close out, repair percentage; review the WPSs, PQRs and WPQs certificates.• Review and approved method contractor statement and NDT procedure, make sure the codes and standers requirements achieved. • Review the final work packages of the projects and signed off the mechanical completion certificates after close out all punch list.• Provides technical advice to PMT engineering, procurement, and construction on quality issues. • Follow up the welding inspectors and the qc engineers and making the monthly evaluation for all the team included technicians (RT ,UT ,painting)• Follow up the concession requests ,waivers requests, technical inquires and make the required register and follow up the results during the application • Attend the meetings with project manager and discus the ways to increase the productivity without affecting on the quality level.• Review the hand over package of all projects from all subcontractor and signed off the completion certificates • Witness and monitor contractor /subcontractor site surveillance QA/QC activities• Reporting to project manager, prepares weekly site report highlighting weekly accomplishments & issues that affect product quality.• Prepare the required procedure according the requirements of the applicable codes and standers.• Promotes safety awareness and safe performance among PMT, including contractor personnel.• Witness for the testing (hydro, leak, pneumatic, hydraulic) according to project specification.• Liaison/interface with completions management teams to assist quality system handovers through mechanical completion.• Performs construction assessments & verifications, general monitoring of construction activities to support project safety, quality, schedule, and cost objectives Show less • Carries out regular external visual examinations complemented with NOT examination as required on Company equipment such as vessels, boilers, heat exchangers, piping according to Company established policies and procedures to ensure continued safe and reliable operation and assure operational mechanical integrity and issues inspection reports.• Inspects plant stationary equipment by entering into vessels, boilers and towers, during shutdowns, to check condition of equipment. Includes noting observations on cracks, pits, thinning and any other pattern of erosion, corrosion and other interior failure. Makes interpretations of findings, analyses for failure, prepares report and issues recommendation to supervisor.• Witness hydrostatic tests and pneumatic tests on pressure equipment, valves and pipelines as per code or Company specs.• Upon failures of equipment such as pumps and vessels, inspect material and assist in the preliminary failure assessments; prepare report and issue recommendations.• Supervises all the UTM in offshore platforms, onshore plant to assure that all measurement points were taken as per code and company specification.• Retirement thickness calculation, corrosion rate calculation, remaining service life calculation for process piping systems and advising for any repairs/replacement/re-rating requirements• Reported anomalies to the maintenance manager and assisted in the choice of the repair method of those Anomalies in promptly manner to avoid delay in production.• Carrying out external visual inspection prior to shut down for the static equipment's including pressure vessels, heat exchangers, coolers, columns, furnaces and stacks etc.• Carrying out initial, detailed and final internal visual inspection complemented with NDT examination for the static equipment's including pressure vessels, heat exchangers, coolers, columns, furnaces, and stacks etc.• Inspect any completed repairs, modifications and/or replacement. Show less • Reviews and assesses contractor / subcontractor QA/QC plans and procedures including test/inspection results.• Follow up the NCRs close out, repair percentage; review the WPSs, PQRs and WPQs certificates.• Review and approved method contractor statement and NDT procedure, make sure the codes and standers requirements achieved. • Review the final work packages of the projects and signed off the mechanical completion certificates after close out all punch list.• Provides technical advice to PMT engineering, procurement, and construction on quality issues. • Follow up the welding inspectors and the qc engineers and making the monthly evaluation for all the team included technicians (RT ,UT ,painting)• Follow up the concession requests ,waivers requests, technical inquires and make the required register and follow up the results during the application • Attend the meetings with project manager and discus the ways to increase the productivity without affecting on the quality level.• Review the hand over package of all projects from all subcontractor and signed off the completion certificates • Witness and monitor contractor /subcontractor site surveillance QA/QC activities.• Reporting to project manager, prepares weekly site report highlighting weekly accomplishments & issues that affect product quality.• Prepare the required procedure according the requirements of the applicable codes and standers.• Promotes safety awareness and safe performance among PMT, including contractor personnel.• Witness for the testing (hydro, leak, pneumatic, hydraulic) according to project specification.• Liaison/interface with completions management teams to assist quality system handovers through mechanical completion.• Performs construction assessments & verifications, general monitoring of construction activities to support project safety, quality, schedule, and cost objectives Show less

  • QA/QC Manager

    Feb 2020 - now

  • Plant Inspector

    Feb 2018 - Feb 2020

  • QA/QC Manager

    Jun 2016 - Feb 2018