Kyle Webb

Experience

• 

  Various Organisa

  Jan 2010 - Jan 2015

  Apprentice Electrician

  - Completed Apprenticeship and gained a wealth of experience across multiple sectors and electrical work scopes.

• 

  EC&M Ltd

  Jan 2015 - Sept 2015

  Electrician

  - Provided electrical services across multiple construction projects including ROY HILL MINE SITE & WHEATSTONE OIL / GAS (DOWNSTREAM). Typical daily work activities included:• Steel conduit / cable trunking / support systems install, constructions of HV switch room and various sub-stations. • Carried out maintenance of PLCs as well as various lighting and power apparatus onsite. • Installed mains power to fixed plant. Tested electrical installation as per standards and regulations. • Installed 11KVA Transformers and completed glanding of cables into substation.• Attended daily pre-starts and completed all relevant risk, hazard and safety paperwork. Show less

• 

  Imtech Inviron

  Sept 2015 - Sept 2017

  Electrician

  - Fast paced role where I oversaw the maintenance of any electrical plant, equipment and apparatus in the Great Portland estates portfolio of City Place House. Typical daily duties below:• Ensured a swift delivery of electrical services across all operations. • Completed monthly testing of backup supplies from the generator and associated switch gear (high voltage and extra low voltage control gear). • Recorded results and resolved any issues or technical concerns. • Carried out maintenance of pumps, motors and MCC panels • Ensured associated backups were compliant and met industry standards. • Utilised all required PPE and maintained safe working areas and procedures.• Performed testing and fault finding of any and all electrical problems throughout the building (including in hazardous areas). • Operated as part of a team or an individual to meet job deadlines. Show less

• 

  Civmec Construction & Engineering

  Sept 2017 - May 2019

  Electrician

  - Worked on projects including the Altura Lithium Project and Gruyere Gold Roads Construction Project ensuring compliance with schedules, specifications and safety controls. Role duties included:• Acted as Registered High Voltage (HV) Operator at Gruyere gold roads project. • Compiled High Voltage switching programs in line with site needs. • Completed High Voltage switching of overhead power lines.• Managed 'Dead' High voltage switching as well as live 'Live' High voltage switching.• Maintained, troubleshooted and repaired all aspects of power generation.• Equipment included transformers, switch gear associated electronics, generators and substations. • Issued and authorised relevant work permits.• Attended daily pre-starts and completed all relevant risk, hazard and safety paperwork.• Read, interpreted and understood P&ID drawings.• Completed installation of verolex cables, cable ladder / support systems, transformers (low voltage side and substation end) and 3 phase motors, steel conduit, pumps and variable speed drives (VSDs).• Carried out fault finding of instruments, motors and apparatus. Performed testing / documentation of instrument junction boxes. Followed lock out and tag out procedures (LOTO) across isolations.• Read, interpreted and understood schematic, line and vendor diagrams.• Adhered to OHS&E industrial construction standards such as permit to works, JHA's and Take 5s.• Performed termination of XLPE cables into substations, switch yards and transformers. Show less

• 

  Yarra Trams

  May 2019 - May 2021

  Senior Technical Officer

  - Hands on role where I completed a broad range of electrical works in order to maintain the tram network. Scopes of works included service, maintenance (re-active / planned), repairs, construction works and projects as required. Typical work scopes included:• Maintained network integrity. Tested 48V back up supplies substation electrical equipment. • Attended callouts in the event of a system failure or abnormality. • Liaised closely with other trade / engineering teams.• Approved Person to switch and operate a range of DC traction switchgear in substations and aerial switches.• High Voltage Operator while using a combination of different high voltage switchgear.• Maintenance of substation switchgear including ABB, Siemens and Merlin Gerrin.• Carried out installation of underground feeder, negative, track bonds, lightening arrestor cables as well as other new electrical apparatus. • Inspected all completed work for quality and consistency. • Terminated 400mm2 copper / non-copper screened cable, asset protection bond cables and control cables.• Performed works under critical time restraints in order to maintain network readiness.• Supervised cable installation works and completed testing and commissioning of installation.• Assisted project managers to procure items, staff, assets, logistics, permits in order to achieve project readiness and success. Provided updates on work progression and resolved any delays or issues. • Coordinated / led work groups to achieve work scopes. Issued permits on behalf of the network authority.• Adhered to and promoted all statutory and regulatory aspects of OHS&E guidelines.• Completed all relevant risk, hazard and safety paperwork (JHAs / SWMS). Show less

• 

  Cat5 Rail

  May 2021 - Sept 2021

  Approved person ( HV switching) / assistant overhead lineworker

  -Short term role where I was involved with High voltage switching activities remotely and locally while communicating with the operations centre.-helped O/H line workers by ensuring tooling and equipment is prepared prior to shift starting

• 

  NGL Power - National Grid Link Pty Ltd

  Aug 2021 - Aug 2022

  Electrician high voltage technician apprentice HV cable jointer

  -Worked on projects such as the Salini tunnel metro upgrade, various fly in fly out roles in the Northern Territory and Western Australia.-Termination of 11Kv and 22 Kv cable indoor terminations ( under supervision).-Use of Nexans and Raychem termination kits.-Installation of transformers, BESS units, ring main units and various other switchgear.-Installation of HV cables ranging from 11KV to 66KV.-Various high voltage switching on different sites.-Testing of installation using a VLF, ductor and 5kv insulation resistance tester.-Completion of necessary OHSE forms such as JSEAs, SWMS, LOTO and permitting systems. Show less

• 

  HEC group australia

  Sept 2022 - Jan 2023

  Electrician / apprentice cable jointer

  Upgrade of Muja power stations coal fired generators (clean and replacement of bushings, resin taping, draining of old transformer oil and refilling of new oil.)· Termination of various High voltage cables from 11KV- 33 KV (Raychem terminations, Raychem straight joints).· Testing of electrical apparatus such as distribution transformers, switchgear and installation works.· Performing Industrial electrical installation works (terminations, testing, Cable support, Glanding and cable Hauling)· Adhered to and promoted all statutory and regulatory aspects of OHS&E guidelines, procedures and controls.· Completed all relevant risk, hazard and safety paperwork (JHAs / SWMS). Developed QA/QC procedures. Show less

• 

  NGL Power - National Grid Link Power Pty Ltd

  Jan 2023 - Oct 2023

  Cable Jointer

  Upgrade of Garden Island Naval base, Bald hill Mine Site, Henderson defence upgrade, Learmonth airforce base upgrade· Termination of various High voltage cables from 11KV- 33 KV (screened TEE connectors as well as heat shrink terminations.· Procuring joint kits and organization of works, permits and procedures; particularly LOTO· Testing and commissioning of electrical apparatus such as distribution transformers, switchgear and installation works. (Hi Pot, VLF, 5KV-10KV IR , micro-ohm testing as well as necessary QA/QC of all high voltage terminations and testing works.· Performing Industrial electrical installation works (terminations, testing, Cable support, Glanding and cable Hauling)· Adhered to and promoted all statutory and regulatory aspects of OHS&E guidelines, procedures and controls.· Completed all relevant risk, hazard and safety paperwork (JHAs / SWMS). Developed QA/QC procedures. Show less

• 

  High Energy Service

  Oct 2023 - Aug 2024

  High voltage technician
• 

  Techcorp Services - TCS

  Sept 2024 - now

  Cable Jointer