Samy Sherif

Experience

• 

  EGYPTAIR

  Aug 2015 - Sept 2015

  Trainee

  The training program covered the following topics:1- Knowledge of the materials used in the different airplane's body parts2- Maintenance steps of the plane's body parts3- The tests done either in between flights or if the plane is grounded due to the presence of a specific problem4- Knowledge of the airplane's jet engines,their different parts and how they are connected together and function properly

• 

  Misr El Nour

  Jun 2016 - Jun 2016

  Trainee

  The training covered the following topics:A- Production of Plastic bags 1- Gained knowledge about the different stages to produce plastic bags.2- Gained knowledge about the different machines used in every stage and how they are connected together.3- Gained knowledge about the principle of operation of every machine.4- Knowledge about the various tests implemented on the plastic bags after being produced to make sure it functions properly under certain conditions.B-Production of PVC and PE plastic pipes1-Gained knowledge about the various stages to produce plastic pipes.2-Gained knowledge about the different machines used in the production lines, how they operate and how they are connected together.3-Knowlegde about the different quality tests that are applied on the plasryic pipes to make sure it does its function properly (e.g. water pressure test and impact test). Show less

• 

  TUBE

  Jul 2017 - Aug 2017

  Trainee

  The training covered the following topics:1- Gained knowledge about the production lines.2- Gained knowledge about the different machines in the production lines, how they are controlled and how they connected together to transform the aluminium from small metal discs into usable tubes. 3- Gained knowledge about the standard used in quality control procedure and the several tests implemented to make sure the tube functions properly (e.g. compression test and the chemical reaction test. Show less

• 

  Fine Hygienic Holding

  Sept 2018 - Mar 2020

  Process Engineer

  • Given the Responsibility to be a temporary line leader of the adult diapers production line (Follow up on the KPIs (Key Performance Indicators), Discuss the problems the teams had encountered during the DDS (Daily Directional Settings) meeting and how to eliminate these problems using TBM (Time Based Maintenance), CIL (Clean Inspect and Lubricate), SOPs (Standard Operating Procedures) and OPLs (One Point Lessons)).• Given the responsibility of the CIL and RLS (Running Line Standard) DMS (Daily Management System).• Took technical training on the baby diapers production lines.• Created and follow up on the PQCDSM (Productivity, Quality, Cost, Delivery, Safety, and Morale) Board.• Took WPI (Work Process Improvement) training.• Implemented The WPI on an RCO (Rapid Change Over) model on the Adult diapers production lines and achieved 60% improvement in the downtime needed for the change-count by creating checklists and midrange sheet for the different counts.• Took responsibility of two areas on the production lines across the plant.• Followed up on the areas’ problems on a day-to-day and monthly (Gap Analysis) basis.• Responsible for reducing the C/O downtime by 5o% across the plant. • Responsible for applying AM (Autonomous Maintenance) Steps zero to three across the two areas. Show less

• 

  Global Napi Pharmaceuticals

  Mar 2020 - Mar 2023

  Maintenance Engineer
• 

  Bel

  Mar 2023 - Jun 2024

  Operations section head
• 

  Mondelēz International

  Jun 2024 - now

  IL6S engineer - Biscuits & Count lines