Mohamed Ahmed Ali Ismail

Experience

• 

  Kahromika

  Jul 2005 - Feb 2006

  Construction and piping Engineer
• 

  INITEC ENERGIA at Egypt

  Apr 2006 - Oct 2006

  Mechanical start-up and commissioning Engineer
• 

  Kahromika

  Nov 2006 - May 2012

   Read and interpret piping drawings Review contract documents and identify requirements and scope of work for project execution. Review specifications, drawings and other documents as per project work. Monitor the preparation of all necessary documents up to the final IFC (Issued for Construction) stage, e.g. plot plans, piping plans, isometrics, locations plans, pipe support standards, material specifications and other relevant drawings and specifications. Prepare BOM for piping system & individual spools. Generate spools isometric drawings. Optimal and efficient utilization of resources namely manpower, consumables, materials and equipment. Good experience with pipe fabrication, pressure testing, repair and installation of pipe spools in accordance with international standard. Administer the preparation of the final “As Built” Develop and maintain valve list, spring support list, piping special items listing, etc. Perform follow-up of piping and mechanical punch lists and be proactive in the punch list clearance process. Ensure proper preservation of piping and mechanical equipment. Attend weekly meetings with our clients to report progress of the project Participate in joint walk downs of systems / sub-system handover for pre-commissioning and commissioning teams Ensure that the Safety, Quality & Environment requirements of the yard are strictly followed. Familiar with Piping Classes Show less  Create detailed drawings for fabrication. Prepare isometric sketches for piping pre-fabrication purposes Prepare materials bill of quantity for piping/accessories, valves, gaskets, etc. Review of piping drawings, including but not limited to Isometrics Typical detail drawings, Plot plan, General arrangement, piping layout. Establish piping & support fabrication and priority Ensure shop has received and used the correct engineering deliverables. Ensure all information and material is available and received at shop. Show less

  • Piping Engineer

    Nov 2008 - May 2012

  • Piping Engineer

    Nov 2006 - Nov 2008
• 

  Al Rajhi Construction LLC

  Jul 2012 - Jun 2016

  1. Plumping installation for 338 villas (KH2 PHASE 2) of the project, 3 schools,2 mosques (750 prayers) and 1 mosques (1500 prayers)2. HVAC installation for 3 schools and 3 multipurpose halls including wall mounted split unites (1.5, 2 and 2.5 tons), cassette unites, concealed unites and package unites with its ducts3. HVAC installation for 3 mosques including free stand unites (5 tons) and wall mounted split unites.4. Installation of firefighting pumps (jockey, electrical and diesel pumps), water pipe line and hose cabinet for schools.5. Supervision for Sewerage Treatment Plant (STP) installation by AES Company.6. Installation of Water pump station which have 5 pumps (KSB) one pump capacity is 40 l/sec and Head 70 m7. Maintenance at the warranty period for the complete project8. Following up the government authorities (water directorate, housing ministry, education ministry, Awkaf, electricity company) to close all the comments related to the final handing over for every side. Show less

  • Senior Mechanical Project Engineer

    May 2015 - Jun 2016

  • Senior Mechanical Engineer

    Jul 2012 - May 2015
• 

  EMC "Egyptian Maintenance Company"​ - Petroleum Sector

  Oct 2016 - Apr 2017

  Senior mechanical and piping Engineer

  At El- Burullus Gas Company (Rashpetco) in West Delta Deep Marine Concession (TAURUS LIBRA ONSHORE MODIFICATION EPC PROJECT) during partial and complete shutdown. Perform pre-com./commissioning activities according to EMC commissioning tracking system Preparing marked-up P&ID for Nitrogen Leak Test Packages Creating and carrying out test procedures for Nitrogen Leak Test Packages Perform Nitrogen Leak Test Packages for all System/Subsystem Supervision and preparation of pre-commission/commissioning task activities on pressure test, leak test, hydro test, flushing, punch list, commissioning checklists. Report progress on commissioning activities during the construction phase of the Project Provide documents on commissioning activities that were completed Participate in joint walk downs of systems / sub-system handover for pre-commissioning and commissioning teams Assist with compilation of MC Pre - commissioning Dossiers by Subsystem Ensure all approved modifications to Works are recorded on red-lined as-built drawings, and are verified as correctPage 3 of 5 Complete the handover documentation packs, which consists of the following: (MC)- Mechanical Completion (S-RFC)-System Ready for Commissioning (SH1) - System Handover (SH2) - System Performance Punch lists Colored P&ID. Mechanical Installation and Pre-Commissioning Certificates. Mechanical Commissioning Certificates Piping Installation and Pre-commissioning Certificates. Piping Commissioning Certificates Technical Quires and all closed Management of Change (MOC) documents. System commissioning procedures System Startup Procedures. Show less

• 

  Methanex Corporation

  May 2017 - Nov 2017

  Senior Mechanical and piping engineer

  Preparation for Turnaround and execution for plant change requests (PCRs) during the complete shutdown.From May 2017 until November 2017. Plant Turnaround Project planning, preparation and execution Checking mechanical documents and piping drawings (P&ID and isometric) Check and request material by using MAXIMO software. Supervise and Lead a team from I.E.M.S.A company (contractor) for the PCRs execution Supervise the preparation and equipment for lifting works Coordinate with safety and scaffolding teams for works at heights Coordinate with issue, performing and area authorities the work permit and reviewing JHA follow up the flange management activities Supervise the workshop pipe spool fabrication and field erection. Coordinate with QC team for welding, PWHT and NDT works. Show less

• 

  RINA

  Jan 2018 - Nov 2020

  Lead mechanical engineer (piping, static and rotating)

   Preparing and executing of pre-commissioning/commissioning task activities related to piping and mechanical disciplines as Piping cleaning (Steam blowing, Air blowing, degreasing and water flushing), pressure test, hydro test, Drying Out, and Air/Nitrogen leak test, Nitrogen purging/Inerting , punch list, commissioning check lists, system reinstatement and mechanical/equipment Operational Test for Process Area, Utilities and Common Areas. Preparing marked-up P&ID for Nitrogen Leak Test Packages and air blowing loops for all System/Subsystem Creating and carrying out test procedures for Nitrogen Leak Test Packages and air blowing Start-up and operational testing of Demineralized Water System, Instrument & Service Air System, boiler feed water system, drinking water system, steam and condensate systems, utility water system and utility nitrogen system Check P&ID's, Mechanical Data Sheets, piping Drawings (isometric) and Documents with respect to Mechanical performance and specifications. The mechanical equipment assets include a wide array of process plant equipment including: pressure vessels; piping, piping connections, piping support systems, piping insulation; spring hangers; hoses, materials handling equipment; refractory systems; manual valves and specialty piping items; and a wide variety of stationary equipment Inspect the equipment (motors, pumps, pressure tanks/vessels, piping connection instruments and other auxiliaries) for correct alignment, bolt tightness, foundation and proper installation as per drawings Ability to perform & guide various activities related to rotating equipment likes lube oil flushing, alignment, lubrication, vibration checks, solo run, load run and start-up etc. Rotating Equipment installation, commissioning and its related issues such as alignment, and leveling using Laser and Dial indicator prepare / Execute Mechanical Running Tests and Commissioning Operational Test Procedures (OTPs) for all equipment Show less

• 

  TÜV Rheinland Group

  Nov 2020 - Aug 2023

  Lead mechanical engineer (piping, static and rotating)
• 

  SICIM Iraq

  Sept 2023 - now

  Mechanical and piping commissioning superintendent

  EPC Produced water treatment and water injection facilities expansion - West Qurna-2 -IQ077 project- Iraq - as a SICIM contractor under LUKOIL client