Adrian Panganiban

Experience

• 

  Keppel Batangas Shipyard

  Jan 2008 - May 2008

  Shipwright Project Trainee Engineer

  • Attend meeting with owner representative, department engineer about the work to be done.• Make schedule and steps of work to be done.• Coordinate with other departments prior to the work to be done.• Checking of Industrial Instruments.• Calibration of Industrial Instruments (Pressure, temperature and Flow).• Assist Electrician and Mechanical department in pipe and wiring installation.• Supervise ship jet wash and grit blasting.• Supervise Carpentry work and insulation installation.• Make schedule of work for contractor.• Attend daily meeting for reporting daily work accomplishments.• Make work report and acceptance report for owner and commercial departments. Show less

• 

  Atlantic, Gulf & Pacific Company of Manila Inc. (AG&P)

  Dec 2012 - Oct 2013

  Insulator Cladder

  • Attend daily tool box meeting to know work priority and safety acknowledgement.• Practice good housekeeping before and after work.• Prepare insulation material and tool to be used.• Measures and cut insulation to be installed.• Fabricate insulation for pipe elbow, tee, reducer, and etc.• Install cold insulation prior to client specification.• Install vapor barriers on pipe insulation before cladding.• Install Cladding after insulation are installed and checked by Quality Assurance.• Cover insulation properly before leaving the work area. Show less

• 

  CJI / SiteServ J.V. Inc.

  Dec 2013 - Aug 2015

  Blaster / Insulator / Chartek 7 applicator

  • Attend morning safety meetings.• Attend tool box meetings.• Secure the work area if it is safe to work in (barrages and signage).• Check the condition of the work piece if it is safe to work on to.• Arrange all the tools and equipment to be used.• Install / dismantle temporary habitat for blasting.• Manual De-rusting / Grit Blasting of pipe and vessel.• Spray / manual painting of pipe and vessel.• Prepare insulation material and tool to be used.• Measure and cut insulation to be installed.• Fabricate insulation for pipe elbow, tee, reducer, and etc.• Install hot / cold insulation prior to client specifications.• Install vapor barrier.• Install GRP / metal cladding.• Mix chartek7 according to specification.• Apply chartek7 to pipe.• Install HK-1 mesh.• Work as for Client Specification.• Housekeeping before, during and after work is done. Show less

• 

  Site Serv Inc

  Aug 2014 - Oct 2016

  and Responsibilities:• Attend morning safety meetings.• Secure accurate work permit for the job to be done.• Discuss tool box meeting to work parties and concerned personnel• Coordinate with the Area Authority for the procedure of the work to be done.• Discuss safety to work party and parties near the work site.• Secure and monitor the safety of the work party and equipment• Arrange all the tools and equipment to be used.• Secure the work area if it is safe to work in (barrages and signage).• Check the condition of the work piece if it is safe to work on to.• Arrange all the tools and equipment to be used.• Install / dismantle temporary habitat for blasting.• Manual De-rusting / Grit Blasting of pipe and vessel.• Spray / manual painting of pipe and vessel.• Prepare insulation material and tool to be used.• Measure and cut insulation to be installed.• Install pipe insulation.• Install vapor barrier.• Install metal cladding.• Mix chartek7 according to specification.• Apply chartek7 to pipe.• Install HK-1 mesh.• Work as for Client Specification.• Ask QA / QC personnel to check the job being done and their go signal to proceed to the next job / procedure.• Report with supervisor and Area Authority about the status of the work.• Housekeeping before, during, and after work is done. Show less • Attend morning safety meetings.• Secure accurate work permit for the job to be done.• Discuss tool box meeting to work parties and concerned personnel.• Coordinate with the Area Authority for the procedure of the work to be done.• Discuss safety to work party and parties near the work site. • Secure and monitor the safety of the work party and equipment.• Arrange all the tools and equipment to be used.• Secure the work area if it is safe to work in (barrages and signage).• Check the condition of the work piece if it is safe to work on to. • Arrange all the tools and equipment to be used.• Install / dismantle temporary habitat for blasting.• Manual De-rusting / Grit Blasting of pipe and vessel.• Spray / manual painting of pipe and vessel.• Prepare insulation material and tool to be used.• Measure and cut insulation to be installed.• Install pipe insulation.• Install vapor barrier.• Install metal cladding.• Mix chartek7 according to specification.• Apply chartek7 to pipe.• Install HK-1 mesh.• Work as for Client Specification.• Ask QA / QC personnel to check the job being done and their go signal to proceed to the next job / procedure.• Report with supervisor and Area Authority about the status of the work.• Housekeeping before, during, and after work is done. Show less

  • Blaster /Insulator / Permit Holder

    Jul 2015 - Oct 2016

  • Blaster / Insulator / Permit holder

    Aug 2014 - Jun 2015
• 

  Hyundia E/C Jicon

  Nov 2016 - Feb 2017

  Insulator

  • Attend morning safety meeting.• Prepare insulation material and tool to be used.• Arrange all the tools and equipment to be used.• Secure the work area if it is safe to work in (barrages and signage).• Check the condition of the work piece if it is safe to work on to. • Measure and cut insulation to be installed.• Install pipe insulation.• Install vapor barrier.• Install metal cladding.• Housekeeping before, during, and after work is done

• 

  Cape Australia

  Mar 2018 - Jun 2018

  IRATA L1 Lagger

  • Participate in pre-start and tool box meeting, Participate in step-back 5x5 per quarter of work.• Participate in the development of Job Hazard Analysis (JHA)’s and site risk assessment discussions.• Follow all client safety procedures and objectives.• Read and understand all relevant permits, method statements and risk assessment discussions• To carry out all works in a professional manner and to the required specification.• Conversant with all insulation standards and specifications.• Competent with insulation, coating and cladding application.• To insulate steam tracing, copper tubing• To insulate pipe and elbows, Tee reducer.• To insulate drums, vessels, heater exchanger, columns and underground pipe.• Be prepared to assist all other trades within his capability in the performance of operations being carried out, be they construction or maintenance.• Responsible in maintaining personal log books to confirm experience and promote progression in qualification; log nature of work, customer’s name and team size; duly countersigned by the Rope Access L3 Supervisor.• Must always wear appropriate PPE before carrying out rope access activities.• Carry out regular training exercises involving Rescue Techniques as required.• Responsible in inspecting and maintaining equipment before use.• Sheet metal fabricating• Ulva shield fabricating Show less

• 

  Cape plc

  Sept 2018 - Feb 2019

  Lagger / Tin Smith

  • Participate in pre-start and tool box meeting, Participate in step-back 5x5 per quarter of work.• Participate in the development of Job Hazard Analysis (JHA)’s and site risk assessment discussions.• Follow all client safety procedures and objectives.• Read and understand all relevant permits, method statements and risk assessment discussions• To carry out all works in a professional manner and to the required specification.• Conversant with all insulation standards and specifications.• Competent with insulation, coating and cladding application.• To insulate steam tracing, copper tubing• To insulate pipe and elbows, Tee reducer.• To insulate drums, vessels, heater exchanger, columns and underground pipe.• Be prepared to assist all other trades within his capability in the performance of operations being carried out, be they construction or maintenance.• Responsible in inspecting and maintaining insulation equipment before use.• Sheet metal fabricating• Housekeeping before/during/after of work. Show less

• 

  Joel Chavez Construction and General Services

  Aug 2019 - Apr 2022

  Sheet Metal Fabricator / Insulator

  Duties and Responsibilities:• Participates in pre-start and tool box meeting. • Participate in step-back 5x5 per quarter of work.• Participates in the development of Job Hazard Analysis (JHA)’s and site risk assessment discussions.• Follows all client safety procedures and objectives.• Read and understand all relevant permits, method statements and risk assessment discussions Use Manual / Automatic Guillotine machine, Manual binding machine, grooving machine at Lock former machine in safely operation.• Fabricate cladding Using aluminum sheet metal, GI Sheet, and Stainless Sheet metal into Elbow, Tee, Encentric / Concentric reducer and pipe spool Cladding• To carry out all works in a professional manner and to the required specification.• Conversant with all insulation standards and specifications.• Competent with insulation, coating and cladding application.• To insulate steam tracing, copper tubing• To insulate pipe and elbows, Tee reducer.• To insulate drums, vessels, heater exchanger, columns and underground pipe.• Be prepared to assist all other trades within his capability in the performance of operations being carried out, be they construction or maintenance.• Responsible in inspecting and maintaining insulation equipment before use.• Sheet metal fabricating• Housekeeping before/during/after of work. Show less

• 

  ALTRAD Asia Pasific

  Apr 2022 - May 2022

  Insulator

  • Participates in pre-start and tool box meeting. • Participate in step-back 5x5 per quarter of work.• Participates in the development of Job Hazard Analysis (JHA)’s and site risk assessment discussions.• Follows all client safety procedures and objectives.• Read and understand all relevant permits, method statements and risk assessment discussions• To carry out all works in a professional manner and to the required specification.• Conversant with all insulation standards and specifications.• Competent with insulation, coating and cladding application.• To insulate steam tracing, copper tubing• To insulate pipe and elbows, Tee reducer.• To insulate drums, vessels, heater exchanger, columns and underground pipe.• Be prepared to assist all other trades within his capability in the performance of operations being carried out, be they construction or maintenance.• Responsible in inspecting and maintaining insulation equipment before use.• Sheet metal fabricating• Housekeeping before/during/after of work. Show less

• 

  JGC Philippines, Inc.

  Mar 2023 - Apr 2023

  Blaster /Painter

  Duties and Responsibilities:• Attend morning safety meetings.• Secure accurate work permit for the job to be done.• Discuss tool box meeting to work parties and concerned personnel• Coordinate with the Area Authority for the procedure of the work to be done.• Discuss safety to work party and parties near the work site.• Secure and monitor the safety of the work party and equipment• Arrange all the tools and equipment to be used.• Secure the work area if it is safe to work in (barrages and signage).• Check the condition of the work piece if it is safe to work on to.• Arrange all the tools and equipment to be used.• Install / dismantle temporary habitat for blasting.• Manual De-rusting / Grit Blasting of pipe and vessel.• Spray / manual painting of pipe and vessel. Show less

• 

  Altrad Cape PNG Limited

  Apr 2023 - May 2023

  Insulation Technician

  Duties and Responsibilities:• Participates in pre-start and tool box meeting. • Participate in step-back 5x5 per quarter of work.• Participates in the development of Job Hazard Analysis (JHA)’s and site risk assessment discussions.• Follows all client safety procedures and objectives.• Read and understand all relevant permits, method statements and risk assessment discussions• To carry out all works in a professional manner and to the required specification.• Conversant with all insulation standards and specifications.• Competent with insulation, coating and cladding application.• To insulate steam tracing, copper tubing• To insulate pipe and elbows, Tee reducer.• To insulate drums, vessels, heater exchanger, columns and underground pipe. • Use Manual / Automatic Guillotine machine, Manual binding machine, grooving machine at Lock former machine in safely operation.• Fabricate Cladding as request for replacement and new fabrication request by client. Sheet metal fabricating (Pipe Elbow, Tee, Encentric / Concentric Reducer and Pipe spool Cladding• Be prepared to assist all other trades within his capability in the performance of operations being carried out, be they construction or maintenance.• Responsible in inspecting and maintaining insulation equipment before use.• Sheet metal fabricating• Housekeeping before/during/after of work. Show less

• 

  Entrepose - Vince Joint Venture (EVJV)

  Oct 2023 - now

  Insulator

  * Attend morning tool box* Prepare material and tool to be used* Prepare and fabricate PIR insulation to be install in pipes* Install vapor stop to the start and end of insulation install on the pipe* install vapor barrier * install and fabricate stainless cludding* Do house keeping before, during and after work done