Danilo Guden

Experience

• 

  Zamil Steel

  Mar 1991 - Dec 1993

  QC Inspector

  • Review and verify all standards, specifications drawings ITP used in every job order commencing in the shop.• Conduct Material receiving inspection of raw materials delivered and verify P.O. and packing list and review all material certificate of each lot of materials delivered.• Conduct in process inspection in fabrication of steel structure such as cutting, fit up, welding, sand blasting and painting.• Issue NCR for the item which is not conformance to the job and coordinate to shop supervisor to commence the job. Show less

• 

  Hyundai Engineering & Construction Co.,Ltd.

  May 1996 - Jan 1999

  Steel structure Inspector

  • Assigned as a QC Engineer at sub-contractor’s fabrication shop and monitor all activities in fabrication and review all ITP’s, Procedures, WPS and verify all MTC, calibration certificates of all machines, welder records. • Checked and verify all in process inspection such as material receiving, fit up, welding and painting.• Review and verify all ITP’s, QCP and Method Statements that submitted by the subcontractor for final approval to the client.• Review and verify all WPS, PQR, Welders verification record calibration of all welding machines, ovens, and quivers all calibration certificate must valid date.• Check pedestals works of steel structure such as excavation, blinding, rebars, formworks and concreting works.• Check civil foundation coordinates and elevation prior for erections of steel structure.• Inspection of all activities in erection of steel structure such as orientation and elevation of foundation, alignment of structure after erection and bolt tightening of structure both in full tight and snug tight. Show less

• 

  Gulf Steel Works

  Dec 1999 - Jan 2003

  QC Engineer

  • Prepare QCP, ITP, WPS, PQR, PQT per project requirements and submit to the QC manager for approval.• Coordinate client inspector which conducting auditing and inspection in their respective job order.• Monitor all in process job done base on their project specifications and standards and routine supervision of all QC Inspector assigned in their respective field.

• 

  Hyundai Engineering & Construction Co.,Ltd.

  Sept 2003 - Oct 2004

  QA/QC Mechanical Engineer

  • Review project specification standards and project procedures in construction and erection tanks, pressure vessel, skid mechanical platforms.• Review and verify all ITP’s, QCP and Method Statements that submitted by the subcontractor for final approval to the client.• Review and verify all WPS, PQR, WQR and verify record of calibration of all machines.• Review all package and MTC and all related document for material receiving.• In process inspection of ATM storage tanks floating roof type and double wall type tanks and Propane, Butane storage tanks such as setting out foundation, bottom plate lay out, fit up and weld inspection. Erection of shell and roof, check plumbness, verticality, check roundness, check peaking and banding of shell fit up, check nozzle and all appurtenances of the tanks.• In process inspection of static equipment such as skid platform pressure vessels drums and columns. • In process inspection such as orientation, fit up and plumbness of plate and nozzles and all appurtenances of tanks.• Monitor, verify and inspect all welding activities including preheating, welding rod used, process of welding applied and check all NDT points such as hardness test , PT, MT, UT or RT. • Check erection and installation of mechanical equipments such as columns and drums.• In process such as installation, alignment, bolt tightening, grouting and internal inspection such as internal tray installation of chimneys and leak testing.• Final inspection and box out inspection.• Check installation and erection of mechanical skid mounted packages such as mechanical inhibitor, air drier, foam package, diesel generator, air compressor package, water storage tanks.• Check installation of fin fan cooler and accessories in process inspection and pre com inspection.• Provide technical assistance direct to workers which involved in the job and assist subcontractor QC for daily inspection activities. Show less

• 

  Toyo Engineering

  Jan 2005 - Aug 2006

  LPG Tank Inspector

  Review project specification standards and project procedures in construction and erection of Pressure Vessels, ATM tanks and Double wall LPG tanks.• Review and verify all ITP’s, QCP and Method Statements that submitted by the subcontractor for final approval to the client.• Review and verify all WPS, PQR to be implemented at site construction.• Review MTC and conduct material receiving inspection.• In process inspection such as orientation, fit up and plumb, check peaking and banding after welding of shell plates check nozzles and all appurtenances of tanks.• Monitor, verify and inspect all welding activities including preheating, welding rod used, process of welding applied and check all NDT points such as hardness test , PT, MT, UT or RT. • Check and monitor hydro test, check leakage if any and check settlement.• Check final box up inspection. • Conduct walkthrough and punch lists items to close out of all tanks and commencing before handed over for hydro testing.• Conduct final box up inspection with the client.• Raise and Issue NCR for all non conformity items which encountered in site.• Assigned as lead inspector in centralize material receiving inspection of the project in all discipline which includes review of material delivery packages, assigned QC inspector to handle the inspection and coordination between client inspector, raise RFI, attend coordination meeting and represent QC between material control department and Quality Control.• Maintain status report and monitoring and control of material which defines accepted, rejected and pending items. Show less

• 

  Bechtel

  Oct 2006 - May 2010

  Senior QC Engineer

  • Review project specifications standards and project procedures• Review and verify all ITP’s, QCP and Method Statements that submitted by the subcontractor for final approval to the client• Review and verify all WPS, PQR, WQR and maintain all records• Maintain and monitor all records of QC tools and equipment used in inspection • Material receiving inspection of incoming material in erection of steel structure such as fabricated steel, steel beams and bolt and nuts.• Check civil foundation coordinates and elevation prior for erections of steel structure.• Check and verify material approval and attend grouting of base of steel structure.• Daily routine inspection and site surveillance all site erection of steel structure • Provide technical assistance direct to workers which involved in the job and assist subcontractor QC for daily inspection activities. • Coordinate and report to the QC manager all QC activities and function in site• Review all Issued NCR for all non conformity items which encountered in site and coordinate all parties involve and monitor to close out.• Assigned as a punch list coordinator for Steel Structure of the project who coordinates all punch list items to be close out by client and proponent.• Attend coordination meeting of all discipline representing steel structure and discuss all matters involving steel structure.• Coordinate between subcontractor construction for assisting for close out items and coordinate with the other discipline and coordinate with the client prior to closure of punch items. Show less

• 

  Technip Italy

  Sept 2010 - May 2012

  Steel Structure Inspector

  • Review project specifications standards and project procedures• Review and verify all ITP’s, QCP and Method Statements that submitted by the subcontractor for final approval to the client.• Maintain and monitor all records of QC tools and equipment used in inspection • Material receiving inspection of incoming material in erection of steel structure such as fabricated steel, steel beams and bolt and nuts.• Check pedestals works of steel structure such as excavation, blinding, rebar’s, formworks and concreting works.• Check civil foundation coordinates and elevation prior for erections of steel structure.• Check and verify material approval and attend grouting of base of steel structure.• Daily routine inspection and site surveillance all site erection of steel structure and foundation and pedestal of steel structure.• Provide technical assistance direct to workers which involved in the job and assist subcontractor QC for daily inspection activities. • Coordinate and report to the QC manager all QC activities and function in site• Review all Issued NCR for all non conformity items which encountered in site and coordinate all parties involve and monitor to close out.• Responsible for erection of flare derrick structure inspection and monitoring of all structure erection. Show less

• 

  Petrofac

  May 2012 - May 2013

  Civil/Structural QC Inspector

  • Review and verify all ITP’s, QCP and Method Statements that submitted by the subcontractor for final approval to the client.• Maintain and monitor all records of QC tools and equipment used in inspection • Check and monitor all civil works activities such as excavation, backfilling and conduct compaction test.• Check foundation of Mechanical equipment such as columns, drums, skid foundations, flare foundation and steel structure foundation such as excavation blinding, formworks ,rebar check orientation and elevation verify survey reports and attend and monitor concreting works and verify all check point before commencing of concrete such as temperature and slump test.• Check civil foundation coordinates and elevation prior for erections of steel structure.• Check road layout and pavements• Concrete paving and asphalt paving• Concreting of access road and asphalt of main roads• Check and verify material approval and attend grouting of base foundation of steel structure and equipment.• Check alignment and bolt tightening of steel structure and mechanical structure and buildings.• Check erection and installation of mechanical equipment such as columns and drums.• In process such as installation, alignment, bolt tightening, grouting and internal inspection such as internal tray installation of chimneys and leak testing.• Final inspection and box out inspection.• Check installation and erection of mechanical skid mounted packages such as mechanical inhibitor, air drier, foam package, diesel generator, air compressor package, water storage tanks.• Check installation of fin fan cooler and accessories in process inspection and pre com inspection.• In process and monitor erection of Flare package..• Provide technical assistance direct to workers which involved in the job and assist subcontractor QC for daily inspection activities. • Coordinate and report to the QC manager all QC activities and function in site. Show less

• 

  HYUNDAI ENGINEERING CONSTRUCTION CO., LTD.

  Sept 2013 - Aug 2015

  Civil/Structural Inspector

  Civil works and Steel Structure Inspection Oil and Gas Chemical complex plant ProjeThe above position was not limited to steel structure inspection but also assigned in civil inspection.As Civil Inspector: • Review project specifications standards and project procedures• Review and verify all ITP’s, QCP and Method Statements that submitted by the subcontractor for final approval to the client.• Maintain and monitor all records of QC tools and equipment used in inspection • Check and monitor all civil works activities such as excavation, backfilling and conduct compaction test.• Check footings foundation in Mechanical equipment foundation such as columns, drums skid foundation, tank foundation, Flare stack foundation, boiler and gas turbine foundation such as excavation, blinding, formworks, rebar check orientation and elevation verify survey reports and attend and monitor concreting works and verify all check point before commencing of concrete such as temperature and slump test.• Check road layout and pavements such as concrete paving and asphalt paving• As a Steel Structure inspector• Check material receiving inspection in steel structure• Check civil foundation coordinates and elevation prior for erections of steel structure.• Check padding elevation and location prior to erection of steel structure• Check alignment inspection after the erection of steel structure prior to grouting• Check bolt tightening as per required torque value.• Check grouting activities and verify check points such as form works, soaking of foundation, cleaning prior to grout verify material use in grouting and check mixing and temperature of grout.• Conduct punch listing in steel structure and closing inspection of punch lists Show less

• 

  Jones Engineering Group / Fluor Arabia

  Nov 2015 - Jul 2016

  Civil/Structural Inspector

  • Works as a representative PMC to Fluor Arabia as a Civil Inspector• Review project specifications standards and project procedures• Review and verify all ITP’s, QCP and Method Statements that submitted by the contractor. • Works as representing the Client PMC Fluor Check and monitor all civil, buildings and structural steel works activities on site done by the EPC.• Check layout for excavation and backfilling activities on site • Check footings foundation in Mechanical equipment foundation such as columns, drums skid foundation, tank foundation, Flare stack foundation, boiler and gas turbine foundation such as excavation, blinding, formworks, rebar check orientation and elevation verify survey reports and attend and monitor concreting works and verify all check point before commencing of concrete such as temperature and slump test.• Check road layout ditches and pavements such as concrete paving and asphalt paving• As a Building Inspector• Check building structure foundation rebars and form works• Check civil foundation coordinates and elevation of building columns.• Check block works and CMU• Check gypsum board installation and ceiling works• Check flooring wall, tile works.• Check finishing works and building accessories doors and glazing works.• Check insulation and roof water proofing at all building Show less

• 

  TECHNIP FRANCE SA

  Nov 2016 - Apr 2017

  Field QA/QC Inspector Steel structures

  • Works in EPCM as a Field QA/QC Inspector in Steel structures• Review project specifications standards and project procedures• Review and verify all ITP’s, QCP and Method Statements and assist package contractor to implement the Quality requirement of the project.• Monitor daily work activities on site such as erection of steel structures, alignment, bolt tightening and grouting activities.• Attend RFI’s and check the activities requested such as foundation prior for erection, Alignment of Steel after Erection, Bolt tightening and grouting.• Prepare Surveillance Report (SR) and Non Conformance Report (NCR) for any deficiency of the works which is not conforming to the project specifications and standards.• Attend weekly Quality coordination meeting between EPCM and the package contractor. Show less

• 

  Saipem

  May 2017 - Mar 2019

  Steel structure QC

  Khurais Central Processing Exoabsion Project