Experience

• 

  Ramcor voltas air-conditioners ltd., vijayawada,ap,india.

  Jun 2003 - Mar 2004

  Mechanical – duct design engineer

  Worked as a Duct Design engineer for the following projects- Vigny an Tutorials - 23 TR.- Bakers Inn – 12 TR.- The Gateway Hotel [Recent Project] – 27 TR.- Spencer’s showroom – 18 TR.- The Delhi public school – 11TR.- Hyundai Showroom – 22 TR.

• 

  Daikin air-conditioners ltd, hyderabad,ap,india

  Mar 2004 - Apr 2005

  Mechanical - design engineer hvac

  Worked as a Design Engineer in the field of HVAC with software’s like Elite, Heat Load calculations and ducting calculations for the projects which I Handled these two projects and they are yet to completeProject Client 1 : M/s. AP Medical and Health Hospital, Jubille Hills, Hyderabad. Ductable Chillers, DCA 315 TR X 3No’s, (Scroll Type Chillers). Project Client 2 : M/s. Sanali Info Park (SQL Ltd), Jubille Hills, Hyderabad. Ductable Chillers, 33TR X 3 No (Scroll Type Chillers). Show less

• 

  I2 t2 international india ltd, hyderabad, ap,india

  May 2005 - Apr 2006

  Mechanical – hvac design engineer

  Worked as a Design Engineer in the field of HVAC with software’s like Elite, Heat Load calculations and ducting calculations for the mezzanine buildings, Hotels, Hospitals and Infrastructure Buildings, Theatres, Shopping malls And all miscellaneous projects in Hyderabad.Functions, Duties & Responsibilities: ProjectsProject Client 1 : Gleason Inc. (USA) Description : Administration block, (2floors) Air-conditioning has been done with equipments 2 chillers (1w+1s) each 350TR water cooled chiller and air distribution with 12 A.H.U.’s with filtration level of profiler 20, 10 microns & 4F.C.U. for H.O.D rooms Total air conditioned for 80,000sft.Project Client 2 : Kennametal India Limited Description : Machine Shop floor, (2floors) Air-conditioning has been done with equipments 2 chillers (1w+1s) each 200TR water cooled chiller and air distribution with 8 A.H.U.’s with filtration level of profiler 20, 10 microns & 15 F.C.U.’s for H.O.D rooms Total air conditioned for 44,000sft.Project Client 3 : DTC (USA) Description : Shopping Mall, Air-Conditioning has been done with 90,000 Sft. Air distributing through 20- AHU and 4-Cillers cooling with 125TR each. Calculation of Duct sizing by using McQuay Software, Duct routing, Selection of diffusers, terminal air boxes and placing at right locs. Show less

• 

  Nri institue of engineering and technology,agiripalli,vijayawada,ap,india

  May 2006 - Apr 2008

  Associate professor - head of the department for mechanical

  Worked as a faculty and teaches the subjects for engineering students to Empower their goals and thoughts for their future.Subjects Handled for the Students:Engineering Graphics, Engineering Drawing, Fluid Mechanics and Hydraulic Machinery, Machine Drawing, Fluid Mechanics, Hydraulic Machinery, Management Science, Refrigeration and Air Conditioning, Production Technology, Production Drawing, Metrology, CAD / CAM, Unconventional Machining Processes. Handling the classes Pharmaceutical Engineering-1 for the Pharmacy students and as well Eng. Drawing Practice lab relates to the Nagarjuna University. Labs Handled for students:Engineering Workshop for all branches.Production Technology lab.CAD/CAM lab.FM & HM lab for all the Electrical, and Civil, Mechanical, people as the Incharge.NSS In charge Programme Officer: Acting as NSS Programme Officer under the affiliation of JNTUK, presently done more & more activities in our college and also yet to develop very small slum areas, villages etc. Show less

• 

  Saudi engineering group international, dammam

  Jul 2008 - Oct 2011

  Mechanical engineer hvac

  -Expertise in handling quality concerns including inspection in shop floor and at different vendors as well as at various sites ensuring compliance. Responsible to review & revise drawings submitted from designer or contractors in line with projects specifications and standards.Responsible for replying client’s Documents Transmittal's.Responsible to manage and supervise subcontractor for their submissions and designs approvals.Verify Clients quality and installation requirements are specified in vendors and document submittals.Preparing Material Submittals as per contract specifications.Checking all the project drawings and look for the engineering issues.Responsible to manage site meeting and Technical meeting with clients.Involve in supervising for all firefighting works with sub-contractors.Attend client quality management and weekly meetings for engineering issues.Closing out of all client requirements.Preparing the final Inspection reports for submission to client.Estimation and making BOQ’s for all HVAC and plumbing & drainage materials as per the building construction standards with approved manufactures.Incoming material (Ducts ,dampers ,fans ,package units ,accessories, Pipes, fittings, plates, beams, channels, angles etc.,) inspection as per specification & drawing.Stage Inspection like installation of HVAC accessories, package air conditioning unit, ventilation fans and smoke extract fans. First fix installation, pre-commissioning and air balancing for all HVAC equipment's before proceeding to final commissioning Inspections.Performance test of hot and cold water lines, leak test to all pipes, installation test for all sanitary wares and accessories, sump pumps, chemical dosing tank pumps, valves as per ecifications & dimensional Inspection of all above fixtures as per drawings.Inspection of SAT Procedures and commissioning of all plumbing and drainage systems.Making red –mark drawings as per the work done with minor correction and submit it for as-built. Show less

• 

  Saudi electricity company,riyadh,kingdom of saudi arabia

  Nov 2011 - Jun 2022

  Mechanical project engineer

  Roles and Responsibilities:Working as Mechanical – Project Engineer for the EHVPD, SEC-COA for the total HVAC System, Fire Fighting System, Plumbing Systems, Overhead Cranes system for GIS Buildings and raceways.-Regular Site Inspection for all the above projects of all the HVAC Works, Plumbing Works, Fire Fighting Works (Request for Inspection’s), Air Balancing Testing by the Third party agencies, FAT/AICO Reports such as PACU, Control Panels, Power Panels, Completion of Snags/punch lists for Plumbing, HVAC, Walk way through Inspections and Fire Fighting works.-Carried out Inspections for Installation of Domestic Water Pumps and their testing.-Inspection for Labeling of Fire Fighting Systems.-Testing of Cold and Hot Water Pipes and Fittings. -Inspection and installation of Fire Extinguishers.-Review and Approval for As-Built drawings with comparison to red mark up and site.-Site executions and installations like Duct Installation, Smoke tests, PACU Units Installation, Elevators, Overhead Cranes, Gridder Installation and the Material Inspections, Plumbing and HVAC Control Panels.-Weekly reports updating after the meetings with all the engineer team.-Reviewing and giving approvals for the submittals of the Design of HVAC System for 13.8kV Switchgear Building, 132kV, 33kV, 380kV and Control Building, Battery Room, Basement and Tunnels, Pump House as per SEC – PTS Standards, NFEA, SEEDS-II and SMACNA Standards.-Coordinating and arranging the Meetings/Kickoff Meetings with the Contractors, Design personnel’s, Electrical and Civil, Fire Department Personnel’s, Maintenance Dep't, Pre-Qualification Dep't and Other Dept.. without any delay/stop in which the works going on.-Walkthrough Inspections with higher department managers after the commissioned and completion of the projects like S/S 9024, S/S 9023 and presently S/S 9020 and S/S 9017 Show less

• 

  Saudi electricity company

  Nov 2011 - now

  Technical team member