Experience

• 

  J. v. electrical corporation

  Jul 2014 - Jul 2015

  Electrical site engineer

  I have experience in carrying out the installation and commissioning of 220KV Bay equipment such as SF6 Breakers, CTs, PTs, Isolators, and PI at the 220KV Anjar Substation. Additionally, I was involved in the installation project of 220KV transmission lines for GETCO Gujarat.In my role, I also oversaw the installation of earth pits and ensured proper grounding in a 66KV substation as required at the site. I prepared schedules for tools, materials, safety equipment, and manpower required for the site, and successfully coordinated with project managers, contractors, and stores to complete projects within record timeframes.Furthermore, I carried out pre-commissioning activities and facilitated project handover activities. I also ensured adherence to all safety standards in line with HSE rules during work. Show less

• 

  Hi-tech transpower ltd. [ g.e.t.co.]

  Jul 2015 - Jun 2017

  Operation & maintenance engineer

  As a Maintenance Engineer for the 66KV Switch yard and 11KV Indore Distribution Substation, the key responsibilities include ensuring the smooth operation and maintenance of the substation equipment. This involves carrying out all types of maintenance, testing and manpower management, work distribution to implement an effective maintenance program.Maintenance related activities for optimum equipment reliability for the 66KV substation are also carried out, including maintenance of power transformers up to 100 MVA, breakers, CTs, PTs, isolators, battery sets, CRP panels and auxiliary equipment. The Battery and charger maintenance of 110V/220V/24V DC is carried out regularly, weekly, monthly, and quarterly.The engineer is also responsible for issuing permits to work, and for proper isolation and LOTO systems for PTW. Daily routine operational checks for all electrical equipment are carried out with recorded parameters in a daily routine checklist. The engineer is also familiar with personal protective equipment and tools such as hard hats, safety shoes, insulated hand gloves, voltage absent tester (VAT)/current detector, and arc flash suits (HRC). Show less

• 

  Reliance industries limited

  Jun 2017 - Feb 2019

  Electrical technician

  Experience: Reliance Industry Jamnagar RefineryAs an Electrical Engineer, my key result areas were as follows:1. Worked on 33/6.6/415 switchgear with HT (Siemens, Schneider) PCC (L&T) and MCC (Siemens) with Siemens (7SJ600, 7SD61, 7SJ64), Areva (Micom) and L&T (P&B) Relay.2. Performed preventive maintenance of UPS (Gutor 40KVA), HVAC, and earthing system, and battery charger (Masstech).3. Commissioned and maintained 6.6/0.415 KV Transformer (Voltamp), conducted Functional Test, PI Test, IR Test, Winding Resistance Test, BDV Test, Oil Filtration, RLA Testing, Stability Test, and Control Simulation Test of 33/6.6 KV Transformer (BBL Make).4. Commissioned and maintained 6.6 KV motors, conducted Solo run, IR Test, WR Test, Control circuit simulation checking before starting the motor.5. Commissioned and maintained LT motors make of BBL, CGL, Loher, Siemens, and ABB.6. Familiar with condition monitoring activities of Motors, Transformer.7. Knowledge of ERP, SAP (PM01, PM02 order creation and close, Material management), MS office, PTW, LOTO, Zone Classification.8. Responsible for proper isolation and LOTO for all electrical equipment in the plant.9. Planned and scheduled daily work permit through SAP and executed them.10. Validated MCC, PCC, and HT board during the shutdown of the plant.11. Made the network for the plant shutdown, selected DB, cable, and allotted feeder for load.12. Created Plant Permit, notification, order, and material request through PP module of SAP.13. Troubleshot plant problems to identify and provide potential solutions to availability, reliability, or integrity problems.14. Led or participated in Daily Tool Box Talks, Monthly safety meetings, Annual fire and safety training, First Aid training, and Medical check-ups, all to ensure the well-being of staff and plant.15. Prepared HITRA for each and every job before starting the job. Show less

• 

  Wind world india ltd.

  Feb 2019 - Aug 2020

  Substation supervisor

  As an Electrical Engineer responsible for the operation and maintenance of a 220/33KV Generation Substation, I played a key role in ensuring that the substation was running efficiently and that all equipment was properly maintained. This included carrying out both preventive and breakdown maintenance of the substation, which included two X 100 MVA SIEMENS power transformers.My responsibilities also included attending to 220KV & 33KV line breakdowns, as well as carrying out preventive maintenance and inspection work. I was responsible for carrying out various transformer tests, such as SFRA test, vector group, magnetic balance, insulation resistance, winding resistance, DGA test, BDV test, short circuit & impedance test, Ten Delta (Winding & Bushing), and voltage ratio test. In addition, I carried out all types of breaker tests, such as breaker timing test, IR test, and CRM test.I also performed CT tests such as ratio test (primary & secondary injection), IR test, polarity test, knee-point voltage, Ten Delta, and relay tests, isolator, LA, bus bar stability, and wave trap tests. My experience included knowledge of SAP, which included order creation and close, material management.As part of my responsibility, I was also responsible for proper isolation/de-isolation and LOTO for all electrical equipment on the site. I also acted as a site safety representative and was familiar with all safety standards as per HSE rules.I was responsible for coordinating with the State Load Dispatch Center (SLDC) to maintain proper load in SCADA. Finally, I had a good ability to find faults and read all drawings, which enabled me to quickly identify and address any issues that arose in the substation. Overall, my experience as an Electrical Engineer responsible for the operation and maintenance of a 220/33KV Generation Substation gave me valuable insights into managing complex power systems and working with a diverse team to ensure stable and reliable power supply to customers. Show less

• 

  Suzlon group

  Aug 2020 - Dec 2021

  Ht incharge

  As the Substation Incharge for the 220/33KV ISTS Connected GIWEL Substation, I was responsible for overseeing the operation of a complex power system that included a Grid Substation (GSS) connected to the 750KV Bhuj Substation (PGCIL). I was also responsible for coordinating with the Western Region Load Dispatch Center (WRLDC) and the Real-Time Automatic Monitoring and Control System (RTAMC) to ensure stable and reliable power supply to customers.In addition to managing the operation of the GSS, I was also responsible for overseeing a 252MW generation capacity, as well as a 2 X 100 MVA + 1 X 50MVA = 250MW Load Caring Capacity. This required me to carefully manage the distribution of power and ensure that all systems were working as they should.My responsibilities also included managing a network of 300KM 33KV overhead and underground lines and 56KM of 220KV lines. This included overseeing regular maintenance and repair work, as well as coordinating with contractors and vendors to ensure timely completion of any necessary upgrades or installations.Finally, I was responsible for managing the operation of two 2.3MW X 120 Compact substations, manufactured by Popular and Stelmec respectively. This included ensuring that all equipment was maintained and repaired as necessary, and that all safety procedures were followed at all times.Overall, my experience as Substation Incharge for the 220/33KV ISTS Connected GIWEL Substation gave me valuable insights into managing complex power systems and working with a diverse team to ensure stable and reliable power supply to customers Show less

• 

  Powered epc services limited

  Jan 2022 - Jan 2025

  Plant manager

  As a Plant Manager at PowereD EPC Services Ltd., my primary responsibility was to oversee the operations of our power plant and ensure that it was running smoothly and efficiently. I managed a team of engineers, technicians, and operators to maintain and operate the plant, ensuring that all systems were working as they should and that we were meeting our production targets.In this role, I was responsible for a range of tasks, including:1.Developing and implementing maintenance plans for all equipment and systems in the plant2.Conducting regular safety audits and ensuring that all safety procedures were followed3.Collaborating with other departments to identify opportunities for process improvements and cost savings4.Conducting regular site visits and inspections to ensure compliance with regulatory standards5.Maintaining accurate records of equipment performance, maintenance activities, and other relevant data6.Managing budgets and expenses for the plant, including capital expenditures for new equipment and upgrades7.Coordinating with the system control center to ensure stable and reliable power supply to customers8.Developing and implementing training programs for plant employees to improve their skills and knowledgeDuring my time as Plant Manager, I successfully led my team to meet and exceed our production targets, while also reducing downtime and improving overall efficiency. I implemented a preventative maintenance program that helped to identify and address potential issues before they caused downtime or safety concerns. I also worked closely with other departments to identify cost savings opportunities and implement process improvements that helped to reduce operating expenses.Overall, my experience as Plant Manager at PowereD EPC Services Ltd. gave me valuable insights into managing complex power generation systems and working with a diverse team to achieve our production goals. Show less