Experience

• 

  Bagnall & morris pipelines

  Jan 1996 - Jan 2001

  Fabricator/welder/pipefitter (pipework/tanks)

  I started at B&M Pipelines as a n apprentice for 3-4yrs where I studied fabrication, welding, machine engineering and site installation. My time at this company seen me get involved in the design, fabrication and installation of the following:Process tanks and vatsFume extraction and ducting systemsLandfill liningsLandfill site gas extraction pipework Process tanksStorage tanksFume scrubbersCustom and special purpose made equipmentPlating linesEffluent treatment and settlement tanksHoppers and chutesTank liningsStorm drainage systemsI specialised in the site installation and site management of workshop fabrications and running repair projects on various locations nationwide. The highlight being the Site Manager for a £500-£750K project in Greenock where my team and I built a 3m diameter storm drainage system on the dock side over 2 months, this was then towed out to sea to the Isle of Bute. Show less

• 

  Studley engineering ltd

  Jan 2001 - Jan 2003

  Pipefitter/welder

  1) Lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems, applying knowledge of system operation, and following blueprints: Selected type and size of pipe, and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to specifications.2) Inspect work site to determine presence of obstructions and to ascertain that holes cut for pipe will not cause structural weakness.3) Plan installation or repair to avoid obstructions and to avoid interfering with activities of other workers.4) Cut pipe, using saws, pipe cutter, hammer and chisel, cutting torch, and pipe cutting machine.5) Thread pipe, using pipe threading machine.6) Bend pipe, using pipe bending tools and pipe bending machine.7) Assemble and install a variety of metal and nonmetal pipes, tubes, and fittings, including iron, steel, copper, and plastic.8) Connect pipes, using threaded, caulked, soldered, brazed, fused, or cemented joints, and handtools.9) Secure pipes to structure with brackets, clamps, and hangers, using handtools and power tools.10) Install and maintain hydraulic and pneumatic components of machines and equipment, such as pumps and cylinders, using handtools.11) Install and maintain refrigeration and air-conditioning systems, including compressors, pumps, meters, pneumatic and hydraulic controls, and piping, using handtools and power tools, and following specifications.12) Weld pipe supports to structural steel members.13) Observe production machines in assigned area of manufacturing facility to detect machinery malfunctions.14) Operate machinery to verify repair.15) Designated Steam Fitter when installing piping systems that must withstand high pressure. Show less

• 

  British army

  Jun 2003 - Jun 2016

  My role is to develop and deliver Explosive Ordnance Disposal (EOD) and Conventional Munition Disposal (CMD) lessons to both military and civilian personnel. I instruct and assess personnel in all matters regarding EOD and CMD. Another key role is to coach and mentor personnel including other instructors to ensure we maintain a good standard of instruction and assessment.Topics include:- Explosive Ordnance Disposal - Conventional Munition Disposal- Land Service Ammunition Mines, Rockets, Grenades, Mortars, Projectiles.- Guided Weapons- Air Dropped Weapons- Bulk Demolition- Explosive Equipments- Boobytraps - Task Scene Management- Range Clearance- Explosive Ordnance Clearance Show less As an EOD Operator my duties include:-Briefing senior management and outside agencies including UK Police and Emergency services on EOD issues and operational constraints, providing advice as a technical expert.-Advised commanders whilst in conflict situations i.e. Helmand province, on design and construction of force protection measures necessary to mitigate against various styles of attack and weapon systems used by insurgents. -Analysis of intent, capability and ground in order to plan and execute EOD tasks in high threat environments to allow freedom of movement.-Managed, planned and conducted Conventional Munitions Disposal operations to allow these areas to be remediated.-Chosen for highly sensitive and high profile projects for example mentoring members of the Afghanistan National Security Forces, giving the Afghan National Army their first Improvised -Explosive Device Destroy capability. -Carried out Counter Improvised Explosive Device training to both British and American personnel deployed in Afghanistan.-Logistical planning and organising training exercises for up to 120 people.-Day to day direct management responsibilities for a team of 30 people.-Writing comprehensive performance based reports, structuring training and development in support of career aspirations.-Conducting Conventional Munitions Disposal (CMD) in UK or abroad with various items of Land Service Ammunition (LSA).-Conduct EOD involving BCMD EOD, Equipment EOD, Bulk demolitions and Mines & Booby Trap tasking. Show less Troop Sergeant, Senior Non Commissioned Officer (SNCO) Responsible for the leadership and management for a team of skilled engineers. Administration and management of topics such as fitness through to welfare and training. Carry out team coaching and develop subordinates within their trade roles, promotional development and daily tasking.Daily duties include:-Mechanical Maintenance Management-Vehicle/Equipment Fleet Management-Equipment Care Management/Training-Team Development Training & Mentoring-Health & Safety Inspection-Conventional Munition Disposal Operator-Reconnaissance Sergeant:Essentially a Project Management Role with tasks including Site Survey, Planning for equipment/manpower/trade/equipment requirements, Budget, Logistics and Time management. I would complete all aspects of the Project from initial planning through to implementation and finally hand over. The Projects can range from Military through to Civilian tasking. Show less -Mechanical Maintenance Engineer-Combat Engineering-Commander of an Engineering Team-Pre planned and Reactive maintenance duties-Responsible for the leadership and management of team of engineers. Administer and manage fitness and welfare issues as necessary. Carry out team coaching and develop subordinates for promotion. Manage all aspects of military engineering tasks including time allocation and resources.-Section Commander for Regimental Potential Non Commissioned Officer (PNCO) instructing and developing the future junior leaders of the Army. Show less -Mechanical Maintenance Engineer (Plant kit, generators, pumps, lighting, hydraulics, pneumatics)-Combat Construction Engineering (Demolitions, Water Supply, Mobility, Counter Mobility, Survivability)-Second In Command of an Engineering Team ensuring the day to day running of all task and engineering teams-Pre planned and reactive maintenance duties for both mechanical and civil engineering tasks-Examination and inspection of various plant equipment, cranes and mechanical handling equipment Show less Role:The Stores Accountant will maintain designated Stores account/s as directed in accordance with company quality procedures. The nature of the specific stores accounts may vary but in principle the accounting procedure is similar in all cases. They will provide coaching and training of stores staff and provide assistance to the Stores Manager in the transfer of accounts and opening and maintaining new accounts. The accounts included Ammunition, Vehicles, Communications Eqpt, Engineering Eqpt, Controlled stores and General stores.Responsibilities:-Conduct stores accounting tasks and investigations allocated by line manager-Order, receipt, issue and dispose of stores items as necessary-Ensure equipment is accountant signed for within each department and ensure periodic checks are -Carried out as required-Adherence to strict security, environmental, health and safety procedures-Carry out any other appropriate task that may be required from time to time Show less A Fitter (RE) is responsible for inspection, servicing and maintenance of all the Army plant operating equipment. You become familiar with construction techniques, and how to work with engineers' drawings and machinery. You become an expert in bench fitting, and fabrication for petrol and diesel engines, mobile generators, transmissions and hydraulic systems. I also remove, disassemble, repair, rebuild and replace all plant assembly. It’s a diverse, hands-on role with responsibility for carrying out inspections and diagnosing faults in assemblies, machine and vehicle hydraulics and electronic systems.Construction plant fitters service and repair plant machinery, such as excavators (JCBs), bulldozers, cranes, dumper trucks, generators and concrete mixers. As a plant mechanic, your work would involve: regularly inspecting engines, gearboxes, hydraulics, electrical systems and tyres identifying faults, dismantling parts and repairing or replacing faulty parts reassembling parts and testing them to make sure they are working properly and safely arranging for machinery that cannot be fixed on site to be moved to the repair workshop carrying out routine servicing of plant and equipment both on site and in the workshop You would use various hand and power tools in your job, as well as specialist computer fault-finding equipment, electrical testing equipment, welding equipment and lifting gear. Show less

  • Sgt Instructor (EOD)

    Jun 2015 - Jun 2016

  • Sgt Bomb Disposal Operator (Engineering Specialist)

    Jan 2015 - Jun 2016

  • Troop Sgt (Team manager/Middle Management)

    Feb 2013 - Jun 2016

  • Section Commander (Maintenance Team Leader)

    Jun 2010 - Feb 2013

  • Section 2IC (Maintenance Junior Team Leader)

    Jan 2007 - Jun 2010

  • Squadron Quarter Master Sergeant (SQMS) Junior Stores Accountant

    Sept 2008 - Sept 2009

  • Ammunition Storeman & Accountant

    Sept 2007 - Sept 2008

  • Section Fitter (Mechanical)

    Jun 2003 - Jan 2007
• 

  P.hawkins limited

  Apr 2016 - Jan 2017

  Field service & installation engineer

  In this diverse role I install and repair various electro-mechanical equipment and consult with customers to plan the most appropriate layout and use of their equipment within the Glass Processing Industry.Using plans, schematics, manuals, and client specifications I determine the installation procedures of equipment according to the manufacturer's specifications.Once installed I operate the systems to demonstrate the equipment and to analyze malfunctions in order to commission it into service.I interpret maintenance manuals, schematics, and wiring diagrams to enable the repair of equipment, utilizing knowledge of mechanics/electronics and use standard test instruments and hand tools.Additional responsibilities include the instruction of customers in general maintenance and servicing of equipment.I consult with engineering personnel to resolve unusual problems in system operation and maintenance.I instruct workers in mechanical and electronic theory to enable a better understanding of the equipment systems.Part of my role is to supervise workers in testing, tuning, and adjusting equipment to obtain optimum operating performance.I advise management regarding customer satisfaction, product performance and suggestions for product improvements or upgrades. Show less

• 

  Hsb | uk and ireland

  Feb 2017 - now

  Operations Manager UK (South) is responsible for the UK South engineering divisions of HSB Engineering Insurance Services Limited, a leading specialist provider of engineering inspection services and engineering-based risk management services. As a people manager I’m highly engaged, demonstrating the ability to inspire, motivate and lead through change. Through coaching and mentoring I look to implement an environment of continuous improvement in performance, excellence and to realise the business targets and objectives. Show less Regional Service Manager responsible for the UK North and UK South engineering divisions of HSB Engineering Insurance Services Limited, a leading specialist provider of engineering inspection services and engineering-based risk management services. As a people manager I’m highly engaged, demonstrating the ability to inspire, motivate and lead through change. Through coaching and mentoring I look to implement an environment of continuous improvement in performance, excellence and to realise the business targets and objectives. Show less Leading a group of Engineering Surveyors within a geographical area to provide statutory and non-statutory examinations. Supporting the Regional Service Manager to ensure that the full aspects of contract delivery are met in-line with service level agreements. Managing engineering competencies to ensure even coverage within our area whilst ensuring day to day work is carried out to the highest standards. Coaching and mentoring team members so as to create an effective team and having detailed knowledge of the legislative, contractual and operational requirements for all areas of in-service examination. Providing site and management support to field staff as and where necessary whilst also carrying out the role of an Engineer Surveyor when alongside my management duties. Show less As an Engineer Surveyor I independently assessed plant and machinery for legal compliance and technical risk within the following disciplines;Lifting & Handling Plant - LOLER 1998. All types of lifting equipment from lifts to escalators and various types of plant machinery.Boiler Pressure Systems - Pressure Systems Safety Regulations 2000. Many mixed and varied pressure systems, including compressed air systems.LEV (Local Exhaust Ventilation) - COSHH Regulations 2002. From small extraction units to Large scale industrial applications with high volume production process plants. Show less

  • Operations Manager UK (South)

    Nov 2023 - now

  • Regional Service Manager - Engineering

    Dec 2020 - Nov 2023

  • Regional Engineering Manager

    Sept 2019 - Dec 2020

  • Engineer Surveyor

    Feb 2017 - Sept 2019