Experience

• 

  Al hoty stanger ltd. co.

  Aug 2005 - Sept 2007

  Assistant welding inspector / ndt inspector

  • Welding surveillance, monitoring and reporting of on spool fabrication.• Responsible for maintaining and establishing Quality Control Records• Interface with client inspectors of ARAMCO with respect to extent inspection and acceptance criteria.• Carrying out PWHT, PT, MPI, UT & RT coordination with the third party.• X-ray of onshore & offshore structural & line pipe welds• Maintain Welders Qualification Test & continuity records.• Carrying out PT and MT at the suspected crack locations. Further verification by UT examination.• Preparing inspection reports identifying location, type, dimensions of the defects and recommending corrective actions to the Welding supervisor including WPS.• Maintaining qualified welders list, maintaining inspection instruments and tools.• Preparing WPS, PQR as per code requirement. • Inspection activities on repair and replacement of items during periodical inspection. Routine welding inspection of piping spool fabrication.• Familiar with Destructive testing like tensile testing and bend testing, sample preparation & Testing.• Pipes internal cleaning inspection by Boroscope.• Prepare Daily Inspection Report/Weekly site report.• Ensure safe working at site. Show less

• 

  Technip

  Mar 2008 - Aug 2010

  Qc welding, piping & painting inspector

  • Interface with Client and Subcontractors QA/QC personnel for ensuring and implementing all welding, Piping, NDT/PWHT, pressure testing, punch listing as per CTJV and Qatar Gas Standards• Review welding operator qualification, Witnessing of Procedure Qualification and Welder Performance Test as per ASME SEC-IX requirement.• Familiar with welding process like GTAW, SMAW, FCAW, GMAW, SAW.• Inspection and testing of Pressure vessel, Pre-Fabricated piping spools, jacketed piping and steel structures. • Attending RFI for Inspection with client• Responsible for arranging, coordinating & witnessing with third party for PWHT, NDT testing, Hydro test, pneumatic test and other witness inspections• Surveillance inspection during welding includes weld parameter, inter-pass temperature, electrode weaving, backing of electrodes and control of electrode and filler wire as per WPS.• Coating inspection on pipes and spools with respect to the project specification.• Witnessed the each stage of coating, such as Cleaning, blasting, primer and second application & final coating as per the standards.• Verifying surface temperature, Air temperature, Dew point and relative humidity during inspection.• Test pack leader and supporting the test pack group for clearing all type of punches. • Visual and dimensional inspection on fit up of weld seam includes root gap, root face, bevel angle, joint cleanliness, any preheat requirements etc.• Review of material test certificate (MTC), as per codes, standards and specifications.• Review of consumable test certificate and calibration certificate of equipment per requirements.• Identification of material construction and witnessing the transfer of cast/heat numbers.• Radiographic Interpretation (Approved by CTJV and Qatar Gas) and Witnessing of Ultrasonic Flaw detection of Weld. • Familiar with Codes and standards like ASME Sec VIII Div 1, ASME Sec IX, Sec V, ASME B 31.3, API 1104, AWS D1.1 and Qatar Gas specifications. Show less

• 

  Intertek

  Feb 2011 - now

  Technical specialist

  • Performing various inspection activities on site and at vendor facilities during manufacture, fabrication, installation and operational testing as per specification and standards. • Verification of vendor compliance to purchase orders and specifications. • Experienced as a Project Quality Control Supervisor (PQCS) in one of the leading construction company SAIPEM, activity includes arranging and coordinating with Vendor and Third party to conduct the inspection and review the inspection report & documents per project requirement.• Inspection of all type of materials with respect to its particular standard.• Review the QC documents and verify prior to each stage of inspection.• Review welding procedure specification, procedure qualification record and carries out qualification tests for welders and welding operators;• Review the inspection test plan, the quality plan, the engineering & fabrication drawing.• Review all the Non-destructive testing procedures and attending at each stages of witness inspection.• Perform inspection of pressure vessels, heat exchangers, columns, structural steels (Buildings and Towers), Piping and pipe lines as per approved drawing.• Inspection of Valves, Fittings, Fasteners and gaskets etc at respective shops with respect to the standards.• Inspection of pipes and Fittings (seamless & Spiral wound) at respective mills shop.• Inspection of Fiber glass reinforced pipes (FRP/GRP) and fittings including destructive tests (Axial & hoop tensile, stiffness) & nondestructive tests such as barcoal hardness and hydro test.• Inspection of poly ethylene pipes and fittings at manufacture facilities. Show less