Experience

• 

  Azahar enterprise

  Feb 2005 - Dec 2005

  Qc inspector

  Industry : Fabrication Sector : Engineering Department : QC Responsibilities and Duties :-• Involved with measurement of product that been fabricate to ensure it is according to drawing and measurement tolerance (GD&T). • Involved with machining product using lathe machine and milling machine.• Check the drawing before proceed with machining to ensure the drawing have all measurement and tolerance.• Operate CNC machine lathe and milling. Show less

• 

  Fujiaire(m) sdn bhd

  Jan 2008 - May 2008

  Training

  Industry : Air-conditioning making Sector : Engineering Department : R&D Responsibilities and Duties :-• Design new air conditioning (indoor unit)• Checking Electronic components• Service air conditioning• Install new air conditioning• Backup for RND Engineering Department

• 

  Sony emcs (m) sdn bhd

  Jun 2010 - Oct 2010

  Training

  Industry : Television making Sector : TVEG Division : R&D 1 Department : TVEG product design 1 Responsibilities and Duties :-• Makes power consumption for new television • Troubleshoot power board, Main board, Local Dimmer board and T-CON board• Soldering electronic component • Check voltage and current across each electronic component.• Makes RIPR test (Reliability Incident Prevention Rule).

• 

  Akar megah sdn bhd

  Aug 2011 - Jan 2013

  Service engineer

  Industry : Marine Sector : Ship RepairDepartment : EngineeringResponsibilities and Duties :-• Play as project leader and decision makers.• As a representative ad-hoc / resident inspector and expeditor and responsible in conducting inspection and monitoring. • Design a structure for crane, air compressor and air bottle (40bar -250bar).• Design service and troubleshoot electrical switch box to suite the electrical motor with main supply for single phase, 3 phase, 50Hz and 60Hz.• Involved in installation of the crane, air compressor, air bottle and RO water machine.• Do a service for crane, air compressor and RO water machine. • Make a progress report.• Programming setup and troubleshoot.• Involved in inspection activities such as material inspection, fit-up inspection, welding, dimensional (GD&T), testing and painting inspection activities in order to meet the client’s.Project list:- (a) Installation Crane (b) Installation Air Compressor (c) Pressure Vessel (d) Installation Crane and Service Show less

• 

  Sgs(malaysia) sdn bhd

  May 2013 - Aug 2013

  Training inspector

  Industry : Oil and GasSector : Service (Inspection) Department : Statutory & VoluntaryResponsibilities and Duties :-• Inspection welding and painting procured • Checking all equipment that necessary to carry out the work• Checking documentation to carry out the work • Witness WQT, WPS and Hydro Test• Vessel Inspection Project list :- (a) Samur, Sipitang, Sabah. (b) TNB Power Plant, Lumut, Perak. (c) Petronas Penapisan, Terengganu. (d) MSL Rubber, Kota Kemuning, Selangor. Show less

• 

  Stenta filems sdn bhd

  Sept 2013 - Dec 2013

  Programmer (freelance)

  Industry : Plastic Sector : Service (Inspection) Department : Electronic EngineeringResponsibilities and Duties :- • Upgrade the system of the machine • Checking all equipment that need to install on the machine • Prepared the documentation • Programming setup and troubleshoot.

• 

  Technipfmc

  Jan 2014 - Sept 2019

  Industry : Oil and Gas Sector : Manufacturing Department : Process Responsibilities and Duties :- - Daily duties involved with fabrication of flexible pipe and umbilical such as: • Provide technical and management guidance and direction to project team.• Carry out investigation, collect information, study and prepare technical report.• Monitor daily production activity to ensure it meet project schedule.• Ensure smooth technical and fabrication interfacing.• Develop PQR and WPS. To find the suitable parameter to develop WPSand PQR based on material and requirement.• Prepared and witness WQT and WOQT.• Provide a training to a welder for WQT and WOQT.• Develop a procedure for Welding and ITP (Welding).• Inspection of welding (Defect analysis).• Check upcoming material to ensure according to a standard.• Involved with audit (Client, ISO, API and BV)• Witness mechanical test, lab test and welding repair procedure.• Making process flow for each project for welding.• Do a macrographic analysis of the material and welding.• Checking all equipment of welding.• Problem-solving due to welding issue.• Prepared technical report for project if necessary.• Issue QER• Monitor welder performance for every process (Total welder for each process 65 persons).• Standard involved (API17J, API1104,API578, AWS D1.1, EN 15614-1, EN 15614-13, EN15613, EN9606-1, EN 14732 and code that relevant to welding) Show less Industry : Oil and Gas Sector : Manufacturing Department : Process Responsibilities and Duties :- - Daily duties involved with fabrication of flexible pipe and umbilical such as: • Provide technical and management guidance and direction to project team.• Carry out investigation, collect information, study and prepare technical report.• Monitor daily production activity to ensure it meet project schedule.• Ensure smooth technical and fabrication interfacing.• Develop PQR and WPS. To find the suitable parameter to develop WPSand PQR based on material and requirement.• Prepared and witness WQT and WOQT.• Provide a training to a welder for WQT and WOQT.• Develop a procedure for Welding and ITP (Welding).• Inspection of welding (Defect analysis).• Check upcoming material to ensure according to a standard.• Involved with audit (Client, ISO, API and BV)• Witness mechanical test, lab test and welding repair procedure.• Making process flow for each project for welding.• Do a macrographic analysis of the material and welding.• Checking all equipment of welding.• Problem-solving due to welding issue.• Prepared technical report for project if necessary.• Issue QER• Monitor welder performance for every process (Total welder for each process 65 persons).• Standard involved (API17J, API1104,API578, AWS D1.1, EN 15614-1, EN 15614-13, EN15613, EN9606-1, EN 14732 and code that relevant to welding) Show less

  • Assistant Welding Engineer

    Jul 2016 - Sept 2019

  • Process Technician (Welding)

    Jan 2014 - Jun 2016
• 

  Onesubsea

  Oct 2019 - now

  Welding engineer

  • Provide basic manufacturing & technical support to all welders.• Read & comprehend Blueprints and Engineering Specifications. • Create and develop new WPS & PQR.• Prepare Process Routings and determine most economical Process Sequence. • Implement Lean Manufacturing.• Maintain and update manufacturing documentation for future availability.• Perform time studies and specify standard run time for manufacturing of components parts. • Assist Supervisor to trouble shoot manufacturing variances. • Create all the procedure and specification to perform the jobs in welding, NDE and PWHT.• Interprete all WPS, PQR and WPQ per ASME, ASTM, AWS and NDE specifications.• Train a welders.• Product involved Xmas tree, connector & wellhead. Show less