Ariharan Gunesan

Experience

• 

  Az Ruas Sdn Bhd

  Jan 2014 - Jan 2015

  QA/QC Assistant Engineer

  •Reviewed and monitored detailed records/reports at the site.•Assist the engineers in reviewing the quality-related documentation.•Assist the welding inspectors and engineers in the fit-up and visual inspection according to the approved WPS.•Prepared daily inspection reports.•Attend the daily progress Meeting with the client.

• 

  ALSTOM (M) Sdn Bhd

  Jan 2015 - Jan 2016

  QA/QC Engineer

  •Inspection of raw material for the property confirmations like dimensional to their respective standards & reference codes at manufacturers like Positive Material Identification.•Work in progress (or) stage inspection includes Elevation, orientation, weld joint fit-up, ensuring the quality of welding during fabrication at shop and erection at the site by Non-Destructive Testing Methods like RT, UT, MT, PT, Pre & Post Heating, Post Weld Heat Treatment (Stress Reliving) and Hardness Checking.•Support the erection team by ensuring as per ITP and inspection is carried out in a timely and prepare documentation on time.•Compiled site work conformance files (SWCF) for every system per Erection Inspection and Test Plan (ITPL) and client requirements. Also, rectify the comments given by the owner regarding qualities.•Systematic conformity checks are carried out on each item of equipment or component, such as pressure gauges, cables, etc., to verify the condition of the equipment, the quality of the installation, the compliance with project drawings and specifications, manufacturer's instructions, safety rules, codes, standards and good engineering practices visually. Tunjukkan kurang

• 

  Eversendai Oil & Gas (M) Sdn Bhd

  Jan 2016 - Jan 2017

  QA/QC Engineer

  •Coordinate the NDE activities as per ASME 31.3 and Petronas Technical Specification (PTS).•Reviewed the Welding Summary to ensure that the spools are covered by the NDT requirement as per PTS (PETRONAS TECHNICAL SPECIFICATION) before being released from the fabrication workshop.•Reviewed the contractor’s QA/QC related documents such as procedures, calibration certificate, material certificate, welder registry (Welder Qualification Test Records), WPS, consumable certificates and etc.• Line walk with clients and perform the pipeline checking as per Isometric and P&ID drawings and ensure the Punch List items are closed. Tunjukkan kurang

• 

  Tecnicas Reunidas (M) Sdn Bhd

  Jun 2017 - Jan 2018

  Quality Assurance Quality Control Engineer

  •Review the welding summary and ensure that all the NDT requirements (RT,PAUT,MT,PT,HT,PWHT,PMI) are meets the Petronas Technical Specification (PTS) requirements and also checked the Heat Numbers of pipe material, Revision of Isometric Drawings, Test Limits, Type of Support, Welder Qualification ,WPS ,Redline Mark Up Drawings and Punch List Contains for each and every test packages before released the system to Hydro or Pneumatic Testing.•Planned and coordinate the NDE activities as per the Weekly Test Plan by the management.•Establishing and mark up, or systems for piping test packages for the hydrostatic/pneumatic test, rising construction/commissioning technical queries on issues relating to piping, test pressure and pipe testing. •To ensure the timely completion of piping pressure test activities to the specified standards and specifications.Ensure necessary HSE reviews are undertaken and indemnified actions are completed. Tunjukkan kurang

• 

  MJ Inspection Consultancy Sdn Bhd

  Jun 2018 - Jan 2019

  Welding Inspector(PIPING)

  •Review of WPS and PQR as per project specification.•To follow all quality control procedures, inspection and test plans.•Checking joint fit-up & Monitoring and controlling welding consumables.•Carry out the welding inspections that are before , during and after welding activities.•Reviewing filler wires and electrodes of welding procedure specification.•Qualification and performance monitoring of welding personnel.•Development and implementation of inspection checklist and report/format.•Coordination of all destructive and Non-destructive testing at various sites for different clients.•Reviewing final Packages for Hydro tests, approving & releasing for Hydro tests.•Preparing the punch list items as per P & ID and Isometric such as, Pipe supports, Valves, Guides, Shoe supports and NDT completion and approving/ releasing packages for hydro test.•Supervision and inspecting welding, Preheat and Post Weld Heat Treatment. Tunjukkan kurang

• 

  Boustead Salcon Water Soulutions Pte Ltd

  Jan 2019 - Nov 2019

  Welding Inspector (Piping , Equipment)

  •Prepare daily reports attached with the marked-up line to be inspected pre and post on P&ID and ISO drawing.•Review of the material tested certificates, monitoring the consumable flow as per WPS. •Monitoring spools fabrication, spools erection, pipe alignment, supporting and testing. •Coordinated various NDT activities and crews as per Job Requirements.•Estimating the total number of Test packs, Tests pack preparation and review. •Monitor and execute the specific inspection of materials, equipment and construction / installation activities on-site such as daily fit-up, visual inspection, Daily Progress reporting, Line check, Hydro testing, Pneumatic Test, Leak Test, Flushing, Re-reinstatement and Flange Management.•Line walk thorough with clients/owner & list out of Punch list for Piping & Equipment's and closely monitoring the punch killing by the subcontractor. Tunjukkan kurang

• 

  MIE INDUSTRIAL SDN BHD

  Jan 2020 - Apr 2021

  Welding Inspector (Piping)

  •Inspection of Raw Materials for the property confirmations like dimensional to their respective standards & reference codes at manufacturer’s like Positive Material Identification.•Review and approval of Quality Assurance Plans (QAP), Welding Procedure Specifications (WPS) and Procedure Qualification Record•Qualification of welders, welding operators and welding consumables as per the requirements.•Work in progress (or) stage inspection includes Elevation, orientation, weld joint fit-up, ensuring the quality of welding during fabrication at the shop and erection at the site by Non-Destructive Testing Methods like RT, UT, MT, PT, Pre & Post Heating, and Hardness Checking to the applicable construction codes.•Inspection of Piping Material Identification and T.C. Verification, Fit-Up of Weld Joints, Welding Inspection, Examination and Witnessing of Destructive (Tensile, Bend, Impact etc.) & Non-Destructive Testing methods like RT, UT, MT & PT,and Final Visual and Dimensional Checks, Pressure Testing - Hydro & Pneumatic, Surface preparation .•Coordinate with owner’s clients & third-party inspection agencies on inspection, visits, clarification & corrective on NCR’S.•Coordinating with Third-Party / Client’s inspection and review.•Resolving all issues / punch points, preparation of final dossier, to obtain handover of the project.•Proper documentation of Inspection Records for Submission to clients and future reference. Tunjukkan kurang

• 

  Dialog Plant Services Sdn Bhd

  Sept 2021 - now

  Welding Inspector (Piping)

  •Conduct the fit/up and visual inspection for the pipe weld material Carbon Steel (A106),Alloy Steel (A335-P11,P22),and Stainless Steel (A316,A308,A312)in accordance with code and standard (B31.3).•Qualification and performance monitoring of welding personnel.•Conduct the Quality Walkdown as per the project requirements.•Coordinate with the NDT team to ensure the pipe spools are meet the NDT requirements before released to the site.•Supervision and inspect welding, Preheat and Post Weld Heat Treatment.•Provide proper documentation of Inspections Records to the clients for future reference.•Establishing and mark up, or systems for piping test packages for the hydrostatic/pneumatic test, rising construction/commissioning technical queries on issues relating to piping, test pressure, and pipe testing. Tunjukkan kurang