Experience

• 

  M/s. gb ndt engineering services

  Jun 2010 - Dec 2011

  Asst

  Thermal Power Boilers Pipes and tubes are works as like Corrosion & Erosion survey and thickness surveyPerformed UT (Thickness Survey, Corrosion Survey) , MT and DPI on the required joints of PipelinesCarried out of Ultrasonic Thickness measurement of pipeline & lamination check of raw materials.Performed NDT (UT, DPT and MPI) activities on Pressure Vessel, Heat Exchanger, Boiler, Reactor, Drum and columns.Performed Ultrasonic Testing on Piping in detection of corrosion, Erosion and Pitting.Performed Thickness survey on Piping and Equipments. Performed Ultrasonic Test Scanning on weld joints of Pipelines, Vessels and Exchangers.Performed Dye Penetrants Testing and Magnetic Particle Inspection on Nozzles and Weld joints of Vessels and Exchangers.Performed Radiographic Testing on weldment gas pipelines, Pressure vessels, heavy streamline, heat exchanger coils etc,.Performed Radiographic Testing on weldments drums and plates using of Sentinel 880 camera model with Iridium.Performed Radiographic Testing on required on heavy steam line super heater coils, Boiler Drums and mill towers circular.EQUIPMENTS HANDLED:Ultrasonic Testing : EINSTEIN – II TFT (MODSONIC PRODUCT),MICROSCAN EX-10, PX – 10, PX – 20,DIGISCAN DS 322 (EEE PRODUCT).UT Thickness Gauge : EEC, MODSONIC, PAN METRICS 26 MG.Magnetic Particle Testing : Yoke Method (AC & DC).Liquid Penetrant Testing : Visible Solvent Removable Method.Radiographic Testing : SENTINEL, ROLLI- 1 Model. Show less

• 

  M/s. kgb inspection services

  Feb 2012 - Aug 2013

  Ndt technician

  Performed UT & MPI on Column, Brazing,vessels and Heavy structural’s.Performed the UT Weldments scanning, Corrosion, Erosion & Pitting survey on pipe lines.Performed Radiographic Testing on weldment gas pipelines, Pressure vessels, heavy streamline, heat exchanger coils etc,.Performed Radiographic Testing on weldments drums and plates using of Sentinel 880 camera model with Iridium.UT Thickness Measurement on pipe lines.Carried out DPI & LPT on non-ferrous materials SS, Copper Nickel.Performed the LPT the Lean Glycol Cooler, Propale Water Cooler External.To carry out MPI on fillet welds & saddle supports. Performed the MPT Fluorescent & visible, on Column and vessels Show less

• 

  M/s. sievert india pvt., ltd

  Oct 2013 - Jan 2014

  Ndt technician

  Performed Ultrasonic Testing in pipeline, vessel and column etc.,Performed LPT in weld area in vessel and heat exchanger.Performing Ultrasonic Examination on Butt Welds of Welder qualification. Test plates various thicknesses.Performing Magnetic Particle Examination on welded components like header nipple, boiler tubes, Partition plates etc.Ultrasonic lamination checking for piping.Maintain QC documents for third party inspection. Preparing & maintaining of final Inspection Reports.Performed UT in piping and detection of corrosion, erosion and pitting.Performed Radiographic Testing on weldments drums and plates using of Sentinel 880 camera model with Iridium Show less

• 

  M/s. national inspection services

  Mar 2014 - Mar 2016

  Ndt technician

  Carried out of Ultrasonic Testing on wind mill towards for major customers like SUZLON, GE, PIONEER and REGION this was inspected by Major clients.NLC (Neyveli Lignite Corporation) – Performed UT on weldments of Crawler, Discharge Boom, Receiving Boom, Crawler Link etc.SPIC (Southern Petrochemical India Corporation) – Performed UT (Weldment Scanning, Thickness Survey and Corrosion Survey) MT and DPI on the required joints of pipelines at Ammonia Plant, Sulphuric Plant.Altec Fabricators – Performed UT & PT on Weld joints and Raw Material (Lamination Check) for all Windmill Tubualar Towers.BEPL (Baby Eng. Pvt. Ltd.) – Performed UT on Weldments of Heat Exchanger, Boiler Drums (required joints), pipe lines and Raw Materials.Metal Engineering – Performed UT, PT & MT inspection on weld joints of Tubular Tower etc.,Performed Radiographic Testing on weldments drums and plates using of Sentinel 880 camera model with Iridium Show less

• 

  Lunik engineering services pte ltd

  Mar 2016 - Dec 2020

  Qa/qc inspector

  Review of quality Assurance plan and inspection test plan as per various job requirements.Inspection of Incoming Spools / Raw Materials as per requirement.Performing visual & Dimensional Inspection and Checking Traceability.Prepare Check list for Fit-up, NDT, Visual Structural & Out-fitting, &Load test inspectionElectrode baking & Issuing and maintain the records for welding consumable as per customer requirements.Onsite Inspection for Fit-up, Visual Structural & Out-fittingInspect pipe spools, Flanges and other fittings(Elbow, Tee’s, Eccentric and Concentric Reducer)Organizing WPS, PQR and Welder Qualification Testing.Good knowledge in welding process of GTAW,GMAW,SMAW,FCAW,SAWVerification of material certifications and hardness of various types of materialsPreparation of welding checklists and final documentation with NDT reportsClient & Third party Co-ordination for inspection activitiesVerifying & Witness of Hydro Test charts for various sub-sea equipment’sPrepare QA final documentations till handed over to clientsMonitoring and Verification of PWHT charts as per WPS maintain record for documentation.Perform and Witness of Hardness Testing as per RequirementCoordinate with third party inspectors/ SurveyorMonitoring equipment’s disassembly and assemblyMonitor And Control The Different Stage Of Manufacturing Actives Like Fit UpMonitoring welding parameter as per WPS& WQTPerform and Pressure Control equipment’s. (e.g. Blow Out Preventer -BOP, Choke and Kill Manifold Assembly, Marine Riser, Gate Valve, and others)Responsibilities to check the work related to the documents as follows, Bill of Materials (BOM) Drawing, material specifications, welding Procedure (WPS), Welder Qualification and Project Specification (PQR).Monitor before, during & after welding activities as per WPS Arrange and co-ordinate NDT (RT, UT, PT & MT) activities.Maintaining inspection reports and supported documents. Show less

• 

  National inspection services

  Mar 2021 - now

  Qa/qc inspector

  All plates need to be identified against mill test certificates at the Vendor’s works before commencement of fabrication.Ensuring that welding procedure and welders are qualified and welding electrodes are approved before commencement of fabrication.Selection of location for spot radiographyReviewing of radiographsWitnessing of hydrostatic testDimensionally checking and carrying out final internal and external inspection for quality of workmanship.Checking that all material test certificates and, where applicable, heat treatment charts are in orderIf specified witnessing any crack detection, hardness checks, ultrasonic tests etc.Checking fit-up and chipping-back of welded seams.Monitoring welding process based WPSMonitoring all NDE activitiesEnsuring that Vendor is familiar with the requirements regarding data books and ensure that the documentation is submitted without any delay.Checking internal lining of reactors and vessels (if applicable) to specifications.Checking trays of each diameter and type, mock assembled in the shop. (for process towers) Review of quality Assurance plan and inspection test plan as per various job requirements.Inspection of Incoming Spools / Raw Materials as per requirement.Performing visual & Dimensional Inspection and Checking Traceability.Prepare Check list for Fit-up, NDT, Visual Structural & Out-fitting, &Load test inspectionElectrode baking & Issuing and maintain the records for welding consumable as per customer requirements.Offering of Radiography, Interpretation of RT films. Witness of Die penetrating test & MPI testing.Onsite Inspection for Fit-up, Visual Structural & Out-fittingMonitor before, during & after welding activities as per WPS Involved during PWHT, maintain record for documentation. Arrange and co-ordinate NDT (RT, UT) activities.To follow up the NDT process LPI & MPIOrganizing WPS, PQR and Welder Qualification Testing.Good knowledge in welding process of GTAW,GMAW,SMAW,FCAW,SAW Show less