Experience

• 

  Hornbach baumarkt ag

  Oct 2004 - Jul 2013

  Retail salesperson

  During my school career I worked as a salesperson at the Electrical Departent, this because of my background and knowledge of electrical engineering and electronics.I also worked here full time for a year between my courses. My tasks were:▪ Give product information to customers.▪ Advice customers in what they should buy.▪ Handling of complaints.▪ Perform electrical chores in and around the building.

• 

  Maastricht university

  Sept 2011 - Feb 2012

  Bachelor internship

  Supporting the department Instrumentation of the faculty Psychology and Neuroscience with building the new Virtual Reality laboratory. Here I had different tasks, this was testing the system and write a way of working so researches and students could work independent on the system.Perform reliability and validity measurements’ with the in-house developed ambulant ExG-amplifier. For this assignment I had to compare the data of the in-house built ExG-amplifier with a commercially available amplifier. Show less

• 

  Biometrisch centrum

  Feb 2012 - Jul 2012

  Bachelor internship

  ▪ Development of a new tool with Lego Mindstorms to make neurofeedback training more fun for children.▪ Perform EEG-measurements’ with patients at the department Medical Psychology from the Atrium Hospital in Brunssum.

• 

  Forschungszentrum jülich

  Feb 2013 - Jun 2013

  Graduate internship

  At the research centre I wrote my bachelor thesis on the topic "Development of Hardware and Software Components for Flicker Light Stimulation in Magnetoencephalography".

• 

  Asml

  Jul 2013 - Feb 2016

  In September 2015 I was asked to join the team of MT coordinators. This role switched every cycle between the members of the coordinator team.I had the following responsibilities in this role:▪ Hand out the incoming request for manual actions to the present manual technicians based on the priority of the machine and knowledge of the MT.▪ Check whether MT’s need hands-on training for certain skills and send them to a request together with an experienced MT.▪ Keep the MT request tool up-to-date.▪ Comply to the Service Level Agreements.▪ Transparency towards Team Lead and when needed reporting the status of the machine/manual action. Show less Since September 2014 I also had the function of Manual Technician, which was performed on a 50/50 basis. Meaning that I switched between (remote) Test Engineer and Manual Technician dependand of the demand.As Manual Technician I was responsible for accurately adjusting, testing and delivering hardware components of ASML products or (sub) systems. This function consisted of the following tasks:▪ Quality: Perform manual adjustments on ASML products and/or (sub) systems in accordance with established specifications. Recognize and report (structural) problems and give support to the solution of these problems when required.▪ Production: Ensure timely adjustments, building in and out of hardware in conformity with the planning and up to customer specification according to the designated procedures.▪ New Products: Contribute to the Pilot process and transition to volume Production. Support the realization/improvement of procedures, processes, protocol etc. Observe/report expected problems in relation to manual adjustments and/or hardware components of the new product.▪ Teamwork: Be service orientated and support good teamwork by the search for solutions and ideas arising from input and the implementation of departmental tasks.▪ Know How: Acquire sufficient knowledge of new and established products and processes, modifications, sub-modules and complete systems.▪ Reporting: Process information in the applicable administrative system SAP and report to the team leader.▪ Cooperation and improvement: Contributes to a good working relation by searching for solutions and concepts, providing input, perform several tasks. Making proposals to improve existing and/or new processes, decided in consultation with the team leader. Show less As a (remote) Test Engineer I was responsible for accurate calibration and qualification of lithography machines used for the semiconductor industry. Testing would be performed according to predefined procedures and included the following tasks:▪ Quality: Perform calibration, performance, system qualification tests on ASML products and/or (sub) systems in accordance with established specifications. Recognize and report (structural) problems and give support in solving these problems when required.▪ Production: Ensure system progress by achieving an amount of tests guided by strict procedures within your shift conform planning and customer specification.• New Products: Contribute to the Pilot process and transition from pilot to volume production. Execute and improve procedures, processes, protocol etc.▪ Teamwork: Able to work in a multi-cultural team with mutual respect within a high-tech environment. Contribute to the team by sharing your knowledge amongst your colleagues. Bring up improvement ideas and contribute to implement them when feasible and possible.▪ Knowledge and skills: Acquire sufficient knowledge of new and established products and processes, modifications, sub-modules and complete systems.▪ Reporting: Process and administrate information in SAP and reporting of the machine status in the machine logbook according to the Way Of Working within test.▪ Communication: synchronize and plan manual adjustments together with the Manual Technician. Inform Volume support in case of disturbances. Keep output/team leader informed in case of disturbance in progress. Inform Material Handler in case of material ordering or returning. Etc.▪ Safety: Comply with the ASML 5S and safety standard rules. Show less

  • Manual Technician coordinator

    Sept 2015 - Feb 2016

  • Manual Technician

    Sept 2014 - Feb 2016

  • Test Engineer

    Jul 2013 - Feb 2016
• 

  Mind media b.v.

  Mar 2016 - Aug 2017

  Application developer / product specialist

  In march 2016 I switched to Mind Media, where I had the function of Application Developer / Product Specialist (ADPS), which consisted of the following tasks:▪ Generate content in the software package BioTrace+.▪ Handling of complaints and returns (defects/repairs).▪ Conduct internal and external repair procedures.▪ Process repair orders.▪ Logging of questions, answers and complaints.▪ Technical support of user days and workshops.

• 

  Zuyderland

  Sept 2017 - Feb 2020

  Medical technology specialist

  In September 2017 I started at my new employer Zuyderland MC as Medical Technology Specialist, where my main tasks are to perform general (preventive) maintenance, repairs and also specialized technical work in relation to medical technology. Localizing and fixing of issues, advise and inform about technical matters and guidance/coordination of activities by third parties. These tasks are specified as following:▪ Specialized technical work: Perform periodic inspections, general/specialized maintenance and repairs on devices related to medical technology. Instruct/advise about maintenance schedules and technical matters, participate and judge new equipment based on technical design, safety and fulfilment of desired specs.▪ Fixing issues: Participate in the 24 hour availability of the department Medical Technology. Recognize issues, determine the priority of the issue and ascertain if the issue can be fixed internally or needs to be done by third parties. Offer professional guidance, coordinate, monitor progress and check the work of third parties. And inform all people involved about the status of the issue.▪ Advise: Give instructions and/or advice regarding maintenance schedule or technical matters like advice about the execution of maintenance or replacement of equipment. Be concerned about the presence of technical documentation, maintenance instructions and safety regulations.▪ Administration: Maintain the technical documentation, register the performed maintenance and repair activities and keep track of stock in the warehouse. Show less

• 

  Universiteit maastricht

  Mar 2020 - now

  (instrument) service engineer

  In March 2020 I had the opportunity to work at I.D.E.E. - Instrument Services which is the engineering department of Maastricht University (MUMC+).My responsibility is to provide first line support on a wide variety of laboratory equipment and contains the following tasks:▪ Troubleshooting on lab equipment and present the findings to lab-technician or lab-administrator.▪ Analyse, determine and execution of corrective maintenance in consultation with client and/or manufacturer.▪ Guide and/or direct external companies with their activities.▪ Perform (electrical) safety checks/tests.▪ Execution of (preventive) maintenance.▪ Within the scope of my focus area, take part in the Decisions Making Unit when new equipment needs to be purchased. Show less