Experience

• 

  Odtü hat yamaç paraşütü/metu aviation society

  Sept 2014 - Jan 2023

  Volunteer paragliding instructor

  • Collaborated with other instructors to provide high-quality training to over 100 student pilots per year.• Coached paragliding students on technical and practical skills, while also contributing to management and participating in competitions as a pilot and crew.

• 

  Nemak

  Jan 2016 - Sept 2016

  Mechanical engineering intern

  • Performed root cause analysis on aluminum casting defects and devised corrective actions to improve the quality and reliability of automotive components such as engine blocks and manifolds.

• 

  Hayat

  Jan 2018 - Jan 2018

  Manufacturing optimization intern

  • Reduced unplanned downtime in a pilot manufacturing line by 30% by optimizing production parameters for multiple products and implementing a new process alignment and visual control system.• Led the implementation of the project with the concept of Kaizen Transactions, Autonomous Maintenance Procedures, and 5S Operations by working in collaboration with quality control and production.

• 

  Türk havacılık ve uzay sanayii

  Jan 2019 - Jan 2020

  • Led a team of 5 student engineers in the pedal-rudder system team for the Very Light Aircraft (VLA) Project, designing the aircraft to comply with all CS VLA requirement limitations.https://www.tusas.com/en/products/aircraft/university-industry-collaboration/very-light-aircraft-vla-university-industry-collaboration • Conducted on-site observations and analysis of the rudder control systems of HURKUS during a 2-month VLA Project internship; provided valuable insights to enhance conceptual design and optimize performance metrics.

  • Candidate Mechanical Design Engineer

    Mar 2019 - Jan 2020

  • VLA Project Intern

    Jan 2019 - Jan 2019
• 

  Orta doğu teknik üniversitesi

  Sept 2019 - Jan 2020

  Senior design project: mechanical design engineer

  • Conceptualized and designed a novel emergency braking system to mitigate the risks of pinion failure, ensuring the safety of the system under 5G deceleration.• Developed a 3D CAD model of the braking system and performed structural analysis using CATIA, ANSYS, and Abaqus.• Conceptualized, engineered, and assembled a fully functional prototype braking system that achieved a 400% improvement in stopping distance over the requirement, with a 25% safety margin.

• 

  Teknofest

  Jan 2020 - Sept 2020

  Helicopter design competition: mechanical design engineer

  • Developed and optimized a high-speed helicopter concept, meeting all performance requirements for high-altitude operation; utilized constraint analysis to ensure design feasibility and maximized efficiency.• Created the design of one pilot-controlled cargo transportation helicopter with two pusher propellers on the tail by using OpenVSP, Siemens NX, and CATIA.

• 

  Fnss savunma sistemleri a.ş.

  Jan 2021 - Jan 2021

  Project engineer

  • Conducted project management activities and maintained the work breakdown structure and project schedule.• Took responsibility for finding out and eliminating any obstacle that prevented or delayed project deliveries for the WCV (Weapon Carrier Vehicles) Project (Kaplan-10 & Pars 4x4).• Implemented design changes to the vehicles based on feedback, resulting in improved reliability and maintainability.

• 

  Tei - tusaş motor sanayii a.ş.

  Jan 2021 - Jan 2023

  Mechanical design engineer

  • Hardware owner of the compressor rotor parts in the 1400 SHP Turboshaft Engine Development Project.• Experienced in strength, safety analysis, rotor integrity, LCF, HCF, burst, rotor vibration, damage tolerance, interference fit, clearance, stack-up, and assembly of parts (CS-E 110, CS-E 510, CS-E 520, CS-E 840, CS-E 850).• Authored technical specifications and best practices for seal design, turning process control, blade acceptance criteria, production and validation of curvic coupling, and design for variation.• Reduced part weight by 25% through optimized geometry without compromising strength or functionality.• Achieved a 70% reduction in impeller blade non-conformity reports by design for variation and new specifications.• Managed early-phase validation and certification studies for compressor rotor parts (from CDR to DDR), ensuring 100% compliance with technical and regulatory requirements, and validating design excellence.https://www.tei.com.tr/en/products/tei-ts1400-turboshaft-engine-development-project Voir moins